CONVERT YOUR GENERATOR TO PROPANE - (QUICK HOW-TO VERSION)
Vložit
- čas přidán 22. 07. 2024
- Generator Conversion Kits: mdfm.co/MotorSnokelKits Other Tri-Fuel Kits - bit.ly/EbayTriFuelKitsor bit.ly/Tri-FuelKits I did this video in 2013. Motor Snorkel came out around 2014-2015. Motor Snorkels are now the way to go. Check them out. bit.ly/EbayMotorSnorkel or bit.ly/MotorSnorkel
Stanley 5000 pricing and availability: If you live the USA amzn.to/1d6KEmc
For more power look at the All-Weather 8000 amzn.to/17Ip3de
If you live in the UK - check out other generators at amzn.to/1dGKDoz
Conversion Kits in the UK - bit.ly/UKGeneratorKit
Generators in the UK -bit.ly/UKGenerators
Generators in Canada - bit.ly/CAGenerators
To Buy a Generator that's already converted check out amzn.to/16ntJqw or amzn.to/15UGawz
Generator Conversion Kits - amzn.to/1nCSuHF
Dual Fuel Generators from NorthernTools - bit.ly/NTDualFuelGenerator
Tri-Fuel Generators from NorthernTools- bit.ly/NTTrifuelGenerators
Propane Generator from Northern Tools - bit.ly/NTPropaneGenerator
Learn how to convert your gas generator to run on propane. If you have a gas generator you should to look into making your generator into a Tri-fuel generator. Which will allow you to run on Gasoline, Propane or Natural Gas. So during an emergency, you don't have to depend on gas stations which tend to shut down during power outages and other situations.
JOIN THE MODERNDAY COMMUNITY DISCORD
mdfm.co/Discord
SUPPORT
Thank you for watching my video. It takes a lot of time and effect in putting out quality informative videos, and I hope you would consider showing your support. Please click the link below to find out ways you can help support my channel. - mdfm.co/SupportMDFM
If you buy stuff online you might as well get cashback from your purchases. Here's how.. bit.ly/E-BATES (affiliate link)
MERCH STORE
mdfm.co/ModernDayTechMerch (affiliate link)
VIDEO GEAR
mdfm.co/VideoGear (affiliate link)
CZcams & INTERNET MUST-HAVES
Services that I personally use.
✔️ Tubebuddy - mdfm.co/TubeBuddy (affiliate link)
✔️ Epidemic Sound - mdfm.co/Epidemic (affiliate link)
✔️ MorningFame - mdfm.co/Morning-Fame (affiliate link)
✔️ REV (Closed Captions) - mdfm.co/Rev10Coupon (affiliate link)
✔️ VPN Service - privateinternetaccess.com/Mod... (affiliate link)
BE MY FRIEND
► Twitter: mdfm.co/Twitter
► Facebook: mdfm.co/MDFMFacebook
► Instagram: mdfm.co/Instagram
► Website: mdfm.co/MDFMWebsite
► Discord: mdfm.co/Discord
As an Amazon Associate I earn from qualifying purchases
I am a participant in the Amazon Services, LLC Associates Program and other affiliate programs. This means if you click on a link and purchase an item, I will receive a small affiliate commission at no additional cost to you. Regardless, I only recommend products or services I use personally and believe will add value to my viewers/readers. FOR MORE INFORMATION AND FULL FTC DISCLOSURE CLICK HERE - geni.us/FTC-Disclosures
#moderndaytech - Jak na to + styl
I did this video in 2013 before Motor Snorkels were available. Motor Snorkels are now the way to go. Check them out.
Motor Snorkels - mdfm.co/MotorSnorkelCW or bit.ly/EbayMotorSnorkel
instaBlaster.
*100% best **Generater.Systems** I have used. A test for hurricane prep here in Louisiana: three AC units, 5000, 5000 & 8000, 3 fridges, 2 device power setups, 4 flat screens....AND I had 40% of the power meter to spare.*
Any idea if your gen set has hardened valve seats designed for use with propane/natural gas? Also note the ten per cent or so loss of wattage capacity when using propane over regular gas.
I as well thought this to be a great video. Can you explain what hose size fitting is used on the snorkel and then back on the top of the regulator where your adjustment screw is? Also what size regulator is being used, or does it not matter. Thx
Great Job Bro thanks 4 sharing !
I’m just curious if you can convert a gasoline generator to propane without a conversion kit. Only using a regulator and completely getting away from gasoline.
thanks for the video , really nice instruction .
Thank you. Thanks for watching.
Thank You for the great video and information. Is Propane more economical then gasoline? Example: My generator ( 10 hp ) Has what appears to be a five gallon tank. Would a propane tank BBQ size run just as long? Just trying to learn. Again Thank You.
Not sure if propane is more economical, but its easier to store for long periods of time without having to worry if it will go bad or not.
Nice demo video. Thanks.
Thank you for your support!
where cam you buy your propane kit
I'm just trying to figure out if the generator will automatically adjust to changes in load. When running on gas the carb butterfly opens more and the flow of gas and air are increased at the same time. I am guessing that when the butterfly opens more when running on propane, only the air flow is increased, thus the air/fuel ratio will be all wrong and the engine will run too lean and probably slow down or stop. Is this a problem?
The "on demand" regulator does the job.
So how does the generator deal with varying loads? The need for more power needs more fuel.
nice job..
how about the bio gas..?
If i wanted to convert my car to run on propane , do i have to cut the frame?
Yes you do and remember Safety third
what if I want my propane for my grill
Yes, anything you want to use propane on, you absolutely must cut the frame first.
of course...and always work barefoot
LMAO... and if you convert you car to natural gas, be sure to get a very long hose when connecting it to your gas meter.
Always use channel locks in the right direction, they will not loose or tighten in the wrong directions
Neat and tidy!
i like the plastic box jack
Nice job, and a thumbs up.
+Joseph M Thank you. I appreciate the support.
Do you think it can catch fire?
What did you do with the gas set up and crankcase exhaust pressure?
Nothing. It works great!
A couple thoughts/questions about your conversion:
1) why did you cut the frame to gain clearance (yes I watched the 5 part video)? Why not move the motor/alternator support blocks 3/4" to gain the required air filter to frame spacing?
2) did the manufacturer of the conversion kit recommend using flimsy flat bar to strengthen the frame? I doubt it is doing anything support wise...
3) in your full length video you had leak issues at the propane regulator valve... did you ever speak with the manufacture to find out if the prime/leak situation was normal?
Thanks
GREAT idea about shifting motor etc. IF possible to keep from cutting the frame.
would be work for biogas...methane gas?
So Stanley is using the Chinese Honda clones also?
When the generator was primed, I saw bubbles coming out of the top of the gas regulator.
Really good video on Propane conversion but would like to know where you got your on demand regulator and the propane hose? We have tried to find propane rubber hose but having trouble finding it. Would like a response please to both.
Beverly Baehm Hi Beverly, Thanks for watching and your kind words. The regulators and hoses come as a kit. I've put links in the description on where you can pick up the kits.
how long will the generator work when connected to a bbq gaz cylinder
7000 watt gen 7 hours. 4/5 that of gas/gallon but propane cheaper per gsllon. $50-$60/day.
I have the same generator, what kit did youuse?
The link is in the bio
did you really need to cut the frame. looks as if the air would have cleared!
What are the disadvantage of using this? does it have a negative effect on the generator since its now using LPG as against the normal Petrol
IMO the disadvantages are the cost of the kit and slight power loss. Also, with current gasoline prices in the US I can run longer on $20 worth of gasoline than a $20 propane tank. Natural gas is the cheapest to run on.
good one
where I can get the kits
The links are in the video description.
How economic is the gas versus propane
Forget hacksaw sawsall and dremel and get an angle cutter/grinder! It will cut fast, Harbor Freight has them and I bought one that has lasted years with lots of use. Get metal cut off wheels. Also a wirefeed welder from HFand teach yourself welding!
u not see that destroyed drill hes using? lol i dont think he will buy / knows how to use tools.. let alone a 4 1/2 in grinder
can you do this to a four wheeler or lawn mower
yes
Did you notice the bubbles at the hose from bottle to regulator connection when you were priming?
Yes, but this is the quick version so I didn't discuses them in this video. Check out this video. Tri-Fuel Generator Conversion - TESTING PHASE (PROBLEMS ARISE) - (Part 4) - FULL LENGTH VERSION Thanks for watching !
Thanks
What was the point of cutting the tubular frame out??????
vc fez um serviço de negro, cortou o suporte a troco de q??
I bought a new generator a couple years back and thought of doing this, but after seeing what you went thru it is not worth it, just for the fact I haven't even used it yet so why would I care what it runs on. I could see this if you were losing your power a few times a year or more, but hey, if it makes you happy that is all that counts. My sanity is worth more than a few bucks in gas.
Thanks for watching. It really wasn't that bad. Plus these days they sell kits called Motor Snorkels that are thinner so so there no need to cut the frame. When I made the video, I was losing power about 7-8 times a year. Its not about saving a few bucks in gas, its about having access to a fuel that you can buy when the power is out. When gas stations lose power too, theres no way to pump gasoline.
Yeah after that hurricane that hit the east coast I'm sure even gas stations have generators now, they can't make money if they can't pump it. But I always keep at least 10 gallons on hand all the time, but it was a great video anyway.
You should make your measurement for the flatbar frame replacement piece BEFORE you cut the piece out of the frame. The measurement will change when you remove the piece of frame. Even better idea is to install the flat bar before you cut.
I'm trying to figure out why he cut the frame to begin with. There is plenty of room to do this. The "donut" isn't that thick. Lol now the generator looks like S***
I have a Stanley 8,000 watt Gen. Where can I get conversion to propane kit. Thanks
Osiris Maldonado Generator Conversion Kits: bit.ly/Tri-FuelKits
Can u do all gen that way
Yes in theory, as long as you find the parts that fit your particular generator. I left a bunch of updates and links in the video description to help you find what you might need.
hello bro..Can we convert a gasoline generator to wind generator by installing blades.
Sure can. Just keep blowing your hot air at it.
@@ModernDayTech ..make a video on convert it to wind generator..
@@ModernDayTech or illustration
@13:12 Bubbles are exiting your load block indicating a bad leak.
Sounds like when I used to watch others work and point out issues they missed. Everyone needs a son watching them work to help by noticing issues!
pointing out a gas leak is pretty helpful...your reply makes you sound like a bitch!
It seems he did the leak test without a primed line.
What is the purpose of the regulator at the propane tank connection?
That is to reduce the pressure of the propane.
10 psi kicked down to 1/2 pound at generator correct? I have a 2 stage combination regulator and am curious if yours is rated the same. Thanks
@@ModernDayTech and great idea, no more ethanol for me!
It at 12.20 he did hook up the hoaaase 🤣🤣🤣
where can i get the kit in Nigeria
I'm sorry I don't know.
Just curious! Why didn’t you just go with natural gas it’s a lot cheaper and you don’t have to back stock your fuel source. I just turn the gas valve on and I’m ready to go. I know it cost a little more for the hose and quick connect’s but it’ll pay for itself if you end up only having 48 hours of no electric. I purchased the Motor Snorkel kit a 189.00 + 12.99 shipping and 50 ft 1/2” hose with quick connector’s and shut off valves and a couple pipe fittings for around 80 more it’s very convenient now not having to worry about getting gas and Stabile even LPG filled constantly. Nice job but to bad you had to cut the frame.
Yeah, those Motor Snorkels are pretty cool. They didn't have them back in the day when I did this video. Also at the time of making this video, I was renting a house that didn't have natural gas. It only had electric. The owner put in a large propane tank for the fireplace and the gas grill so I was able to hook up to that if I had too in an emergency. I did a whole video about hooking up the big propane tank here - czcams.com/video/EFMQsTgxOig/video.html&list=PLFsF_30Yizn81qxCpo6YU-X0_QTfuv37W . My generator is still going strong. I start it about once a month for an hour or so to help me burn through the gas and keep everything lubricated. Let me know how the Motor Snorkel works out in the long term. Thanks for watching and commenting ~Eric
Did you have to convert anything? Or just snorkel kit? I'm googling to see if I can see what you're talking about.
Old experienced propane supply man says both gas teflon and paste used together is what he found best. He had 50 years experience. Who am i to doubt this?
I think you did a Great job.
Thanks Ken! I appreciate you watching and commenting.
get some self tapping teck screws and a saws all and you cut the install time in half
What psi is the regulator on the tank?
I'm no expert, I just buy the tanks at the store. Propane tanks are high pressure and that's why you have to install a pressure regulator. From my understanding, if you have natural gas, you don't need the pressure regulator but you need the on-demand regulator though.
@@ModernDayTech I was hoping you knew what the regulator said on top, it tells what psi
Nice job! I am doing the same thing. One question.....why the rubber gloves?
@ 7:52 the yellow frame reappear ;)
continuity error.
How long will a 20 lb tank of propane last with your generator?
+Eric H 20-24 hours. Thanks for watching.
Where can I buy that conversion kit?
There are a bunch of places, here is one. amzn.to/1nCSuHF
Thank you Buddy I appreciate that.
hey if it happens more should look up motor less pump and water mill generator a lake can power a whole area
4 1/2" angle grinder @ HFT for $5 with coupon, 3- pack cutting disc, still under $15 ....abt $10
особенно прикольно было смотреть когда на утечку проверяли соединения патрубка к смесителю. там нет давление там, розряжение \космос\
Couldn't you have installed a different style are cleaner and avoided cutting the frame. Nice job on the conversion.
Is it cheaper to run propane or just regular gas?
If you get a good price on propane it's cheaper- the real advantage is you don't have gasoline spoiling in the carburetor and gumming everything up during long term storage- so the unit is always ready to use
I'm wondering how long a tank of propane will run a 3.6KW gen? Where I live a tank costs $20. Currently I can get just under 10 gallons of gasoline for $20. At 50% load those 10 gallons would get me about 25 hours of run time. And as much as 28 hours. Could 1 tank of propane do that?
Deucealive75
nah a tank of propane is equal to around 4-5 gallons of gasoline.. you're getting FUCKED hard on propane at that price
propane of lying has app. 90% energy of gasolene .more costly to use propane .I am trying to convert propane gen. to gasolene because when camping I run out of propane too soon. and nor refills would breaking camp and going to town ,with gas I could fill with can fill with of gas ,jd
an some of each tell me if any proble,my converting Kohler propane gen.back to gasolene? I have right size gas carb and fuel pump .john Sent
you need to tighten those gas fittings better dude... pipe dope doesn't work unless the threads are very tight.
Brass fittings can NEVER be tightened "TOO TIGHT" Snug, yes or else you can break or damage them.
I was afraid to cut the frame but it's not so scary, the alternative is far riskier.
Yeah its not that bad but with the new motor snorkels you shouldn't have too. mdfm.co/MotorSnokelKits
Yeah its not that bad but with the new motor snorkels you shouldn't have too. mdfm.co/MotorSnokelKits
I want to convert to biogas
Whar a palaver !!!!
Teniendo las herramientas adecuadas es un poco torpe.
U used way too much pipe dope buddy, u also need to actually use tools and tighten down those fittings.
Why did you cut the frame. Couldn't you have just used a different type of air filter or a smaller filter box
No. 10 years ago when this video was released there was very limited options, but these days, you don't need to cut the frame as they now have motor snorkel kits. I've update the video description and pin comment and links to motor snorkels kits.
Someone get this man some tools!
...but he has tools. They're in that plastic box he's using as a jack stand @3:32 This video invalidates the old proverb about giving a man a fish vs. teaching a man to fish. Hey, at least I didn't pay to watch it.
Dude im a welder/ fabricator and when I see stuff like this at first I cringe and then I stopped and wondered how would I have done it if I didn't have a welding machine ect, then I realize
FUCK YAH BUD Good job!
How much money this thing,Carburetor generator can be used? -china generator
Two regulators??
One pressure, one on demand (safety)
ModernDayFamilyMan Won’t the demand regulator also regulate the pressure?
Greenid Guy No, propane tanks need a pressure regulator. I believe most natural gas lines only need the on demand.
ModernDayFamilyMan Oh ok, thanks for the info.
You had a LEAK at 13:14 - 13:15 when you primed it.. You can see the soapy water jump from that top fitting ...
Thanks for watching and commenting. This was the quick version so I didn't go into detail about the leak. You can watch the full version to see more about it. czcams.com/video/XK1z9OoMlyA/video.html
"Pipe dope" doesn't need to dry.
I have never seen anyone use channel locks to teighten
Fittings with.
You gotta use what you have. They work great!
He cut the frame to give the air box clearance after the spacer install! any one with any bit of brains would know this!
And he probably makes millions
Billions
Get a sawzall man, one cut less than a minute!
That cost $$$. I had to use what I had on hand.
I'm still in shock to see that there are actually people who cut their frames on their generators. Wow, not this guy. That's why I'm going the Motor Snorkel route instead. No need to cut anything on my brand new, 11kw Champion generator.
Thanks for watching Ozzie. I did this video over 4 years ago. Motor Snorkel came out about 2 years ago. Motor Snorkels are now the way to go, I even say that in my video description today. My generator is still working great today.
Okay, I didn't know the snorkel wasn't an option when you did the install.
whats with the gloves ?? :) and bare feet ?? bahhh hahahaa
might need to pee
The thinness of the flat stock you used, would be worthless for any support at all.
or the fema stove generator
i wood be to find something that works with paying the middle man buy 75 dollars charging 300 and if there a problem will help
You have probably answered this many times already...but why do this?
w2ville During a power failure, most gas stations are closed and the ones that are open will have lines for hours and hours. I think you can figure out the rest....
+w2ville GASOLINE GO'S BAD trying to keep your genorater full of gas is not a good thing anymore
1.To not breathe toxic fumes.
2. To not recycle old gasoline. 3. To not have corrosion in the carburetor and system.
4. To store unlimited propane, unlimited time.
What the heck are you wearing gloves 🧤 for ?
Use synthetic oil in the engine.
Sawzall at Harbor Freight for less than $20, just sayin
Maybe he doesn't live near a harbor freight. Ever stop and think before you post? just sayn...
There might be some changes in the reciprocating saws sold at harbor freight but the $19.99 reciprocating saw I bought at harbor freight like 10 years ago wasnt worth $ 00.99 cent. Maybe their bauer's or Hercules line if they have one is better but I only like the generators and water pumps and maybe air compressors. Well some hand tools too and that plasma cutter is quality but even the regular welders can be beat with some ebay chinese welders like "Primeweld" and ""amico" but there is no AC for aluminum for under $900. The Yeswelder in Mig and their Plasma 55amp look sweet.
Please buy the shirts first, before you watch the video, otherwise you won't want to.
No reason to cut the frame
Back when I did this video, they didn't have motor snorkels. You had to cut the frame or the air filter cover would not have fit.
Dang man, you're dangerous. Primitive cave man tools and methods. But at least you have your safety glasses on.
That's right, he may get a serious foot injury or get pinched, cut, poked, shredded, electrocuted, burned, scorched, or just plain blown up, but his eyes will always be safely behind the glasses.
His hands will be fine with those rubber gloves on too, eyes.. check, hands.. check, where's the rest of him?? He didn't need the rest, all good!
the price you pay it should be ez install not cut and drill and bolt
Yep, $170-$200. That's what they cost.
Your fitting ain't even tight.
Not true. Still no leaks years later except at the mixture screw which shouldn’t be tighten. The leak I show in the video is normal and doesn’t leak when it’s running.
all that trouble and money when you could go diesel
Now he's got 3 fuel sources available as opposed to just 1 with diesel.
Painful to watch!
You had me at Dremel cutting tool 🤦♂️
Just can't get over you using pliers/channel locks to tighten the fittings....UGH!
would be work for biogas...methane gas?