Mercedes Benz W203 W211 Throttle Body Cleaning I C180 C200 C230 E200 M271

This video will show you how you can clean the throttle body on your Mercedes Benz W211 and W203 at your home with very minimum tools.
This tutorial applies to all the models of Mercedes Benz having a M271 engine.
Cleaning the throttle body will solve almost all the jerking, hesitating and misfiring issues in your car and will give your car a brand new feeling. Your car will run a loot smoother and you will feel a sudden increase in the acceleration of your car.
The tools required are as follows :
1: T25 Torx
2: Flat Head Screw Driver
3: Carburetor Cleaner Spray
4: A Clean Cloth
Please SUBSCRIBE my channel if you are interested in Automotive Guides, Tutorials and other stuff.
sinanonboard

[@user-by7xo8rb3m]

Great lesson thumbs up

[@colinbayley232]

Thank you so much I've just followed your instructions and believe me the part I took off was filthy I gave it a really good clean as you showed .
I was getting a drop in my idling needle as I pulled up . And was going to take it to the garage but I followed your advice now it's like I've got a new car thank you so much 👌👌👌

[@sinankhan9796]

Thanks for appreciating

[@aliusama2939]

Very well explained, now i can clean the throttle at home using this video as a guide, can you please make a video on cleaning of cluster meter.

[@SumGe]

Very informative video! Make more videos on good things like this very helpful tho!

[@sinankhan9796]

Thank you for your feedback

[@ratkopeic]

Excellent video. Thank you very much

[@sinankhan9796]

Appreciated

[@albertmnisi2755]

Very good guide video.

[@sinankhan9796]

thanks

[@lekonarodrick6821]

Such a great video

[@henrymaterla4709]

GOOD VIDEO! Th. Use only!!!!!.CRC-MASS AIR FLOW SENSOR CLEANER -for cleaning -MB-Throttle BODY. GOOd LOOk.

[@miloszrzepecki168]

On your car are missing two hose screws on right bottom side (5min 25sec)! They need to be removed before hose removing! With them its almost not possible.

[@sinankhan9796]

Thanks for letting me know, I’ll have a look

[@calebadeleye]

can i apply this to the E320 2004 model?

[@batvenio3533]

Great video thanks. By accelerating the hose went out and the engine light shined. My car has no power. What could be the reason that by pressing the gas pedal the hose went out from the trothle body? Can anybody help? Thanks

[@sinankhan9796]

Your car is missing the clamp which holds the hose

[@mjsadvocate1]

Did this cleaning, but I was not able to move the butterfly flap freely. I saturated the ends with throttle body cleaner, but still wouldn't move. Is there a lock mechanism that keeps it from moving, or is my throttle body likely damaged and in need of replacement? I have a 2005 Mercedes C230K. Thanks for the video!

[@sinankhan9796]

on majority of cars, its movable. but you can also unscrew the coin as well by removing the 2 screws in the centre

[@nkhondochagwamnjira1344]

I am having a problem with my W203 M271 engine. The 1st spark plug has been stuck and all i replace are the remaining 3. How do I remove the stuck spark plug without damaging anything on the head. My cars performance gets affected as sometimes when I press down the accelerator the car has a rough idle and engine surging.

[@sinankhan9796]

Have you tried pulling it out with the coils? Just unbolt the plug and then insert the coil… then remove it with that coil

[@user-dd6fx8in3q]

Super hard to remove that pipe....I can’t

[@Juljan-nc4cq]

Yesterday I wanted to clean the MAP sensor of my car and I saw that the pipe that connect to the MAP sensor was missing. can you help me with any information? I have a w203 c180k m271

[@sinankhan9796]

I know i am super late to reply, but I’ll have a look

[@rixordix]

Bro I have the same issue, the little MAP sensor that is screwed onto airfilter housing, the nozzle is broken, I don't know which vacuum hose needs to be attached?
In this video it looks like there is no little hose connected to the map sensor, is that right?
I have 1little vacuum hose leftover, it's around my headlight unit, it's long enough to reach the map sensor, would it be that hose?
Thanks guys

[@ka5269]

are you sure you can move the throttle plate like that?

[@sinankhan9796]

Nothing will happen… at least not on this W203

[@tik-tokreccaped7876]

RIP TO THAT THROTTLE BODY MAAAN you dont move it with your hands ever

[@sinankhan9796]

Thanks for the feedback… i have cleaned throttle bodies at least a 100 times… never had any issue