Video není dostupné.
Omlouváme se.
How To Clean Your Mercedes Mass Air Flow Sensor (MAF) | Mercedes Benz S Class S500 W220 M113 Engine
Vložit
- čas přidán 2. 02. 2016
- #MercedesBenz #MAFSensor #SClass #W220
Hi Everyone! If you're having acceleration issues while driving, or a shaky engine at idle, then chances are your MAF sensor (Mass Air Flow Sensor) could be dirty. Don't worry because once you clean it, your car will run like new again. I'll also show you how to clean your throttle body. This whole procedure will help with increasing MPG on the freeway and in the city. Now grab a pair of gloves and lets get started!
___________________________________________________________________________________________________
▶🔔Please like and SUBSCRIBE + Turn on Bell Notifications🔔 Thanks!
▶💲 Show Your Support By Clicking On The "THANKS" Button Below This Video
▶💲VENMO: account.venmo....
▶💲 PAYPAL: www.paypal.com...
▶TWITTER 🐤: / garage_dynamics
▶FACEBOOK: www.facebook.c...
__________________________________________________________________________________________________
🛒 Amazon
▶MAF Mass Air Flow Sensor Assembly for 99-10 Mercedes-Benz: amzn.to/3F2XwLY
▶Plier set: amzn.to/3gLx3ZY
▶Scotch-Brite Heavy Duty Scour Pads: amzn.to/3APEvKC
▶CRC Mass Air Flow Sensor Cleaner: amzn.to/3ODGHuc
▶CRC Heavy Duty Silicone Lubricant: amzn.to/3Vr1qDS
▶Microfiber Cleaning Cloths: amzn.to/3gEVdp6
▶Steel Pry Bar: amzn.to/3VMZOVl
▶BG 44K Fuel System Cleaner: amzn.to/3XC2h6n
▶LED Work Lights: amzn.to/3jI3hGB
▶Rolling Creeper Garage/Shop Seat: amzn.to/3Z4ZiEC
▶Cordless 1/2 in. Impact Wrench Kit: amzn.to/3jHpJQo
▶Impact Socket Set: amzn.to/3WMhhxw
▶Automotive Magnetic Fender Covers: amzn.to/3WTynJH
▶Shop Towels: amzn.to/3Cf590d
▶GLOVEWORKS Industrial Black Nitrile Gloves: amzn.to/3IekKAH
🎦Video Equipment Used For Videos
▶Main Camera: amzn.to/3XPXiz6
▶GoPro: amzn.to/3XJXgsG
▶Wireless Microphone: amzn.to/3H1bBLu
▶Microphone (Voice Over): amzn.to/3UgMdnS
▶Camera Microphone: amzn.to/3irXaG2
▶Dead Cat: amzn.to/3OSfLXJ
▶Tripod: amzn.to/3AZlqWn
▶C Stand: amzn.to/3GYgcOv
▶Lights: amzn.to/3UrPalA
▶Light Stand: amzn.to/3in5c2R
▶12-60MM Lens: amzn.to/3VLjSHo
▶Macro Lens: amzn.to/3vbZxOn
Proceeds help support this channel. Thanks!
***Need to know how to remove the air intake? Then click here: • How To Change Your Mer...
Note I added the pink dot and arrows for better understanding. Mercedes did not do this.
Music by: Ross Bugden: Chaos / @rossbugden
Best video ever on MAF sensor and air deflector not only taking your time while explaining details not to mention the process removing and replacing the MAF is much better and different from several other videos I have watched IMHO. Thanks... And no one ever mentioned the pink dot LOL.
Thanks PhoenixStarman! I'm glad you noticed the pink dot!! It's still there too lol!!!
Clean clear voice over. Nice video on this. Thanks for sharing
Just wanted to say thank you. I was starting to experience a slight rough idle from time to time. Engage trouble shooting mode. Of course I came to your channel first. I first tried the MAF spray, and that did help, but didn't solve my problem. Step two was changing all the spark plugs as well as a new MAF sensor. I also added Liqui Moly Jectron fuel injection cleaner. That solved all my problems. Just needed to express my many thanks for your videos.
Hello Kevin Kelker! Wow! That's awesome! I'm glad you solved the issue and you're car is running smooth again! 🙌 It's always a pleasure to be of service to you :)
Great video! I had to remove the MAF sensor to change out the 5-way vacuum fitting just in front of the MAF housing. Viewers might want to replace this and the breather hoses hoses while the MAF sensor is out.
You’re awesome 👏. You help me save a lot of money. You can’t believe this, a vehicle mechanic asked me to pay him $375.00 part and labor to replaced the MAF sensor. After watching this video, I fixed the MAF and car my run smoothly. All I did was cleaning. 👍🏿👍🏿👍🏿👍🏿🙏🙏🙏🙏Thank you
And that is cheap.
Yeah $375 is super cheap.. get back to me when they try charging you $5k for a job that costs $300 in parts that you can easily do yourself. Lol.
Nice work.
You can also spray the sensor in place.
I would suggest pulling the TB as well, a bit more work but you'll do a better job of cleaning plus be able to install a new base gasket.
Also, if theres oil in the hose to the elbow that's indicative of a failing pcv separator. Replace the pcv separator assembly. You don't want oil coking inside the TB or inside the intake on the runner flaps.
You make GREAT Instructional videos!!!! Please keep doing them for S500.
Outstanding video instruction. I was unsure about doing this until I saw your video. Thank you. DONE!
Thanks for the kind words Mateshaljc!! I'm glad this video was able to help you out :)
Awesome video, looked at 20 before finding yours, most helpful and precise! got the job done car runs GREAT again!!
Thank You!!!!!!!!!!!
Thank you Joe Giordano! I'm glad to hear your car is running great now! :)
Just by the begging of the video I’m already your fan mister thank you so much for such a super great video wowww
Thank you for the kind words Willy Will!!
Thank you for these videos.
I have a 2005 S430 that runs perfect and your videos have been really helpful in maintaining my Mafia Prince Mobile
You're welcome Vin Mega! I'm glad to hear the Prince is running strong!
You're amazing at explaining things. Thank you so much.
Thank you for the kind words HITZONE PRODUCTIONS. You're very welcome! I'm glad I could help. Cheers! :)
Thank you. Helped me on my wife's ML500 W164. Same procedure.
Hi +ayppen396454
Nice! I'm glad everything worked out for you.
Great video... I love how you are detailed in your explanations.
Thank you Marshall W.! :)
Thanks! Great, detailed explanation. Did mine today and it was a total success! Subscribed.
Hello Seti Depp! Thank you for your support of the channel! I'm so glad to hear everything went well! Many blessings to you brother!
You can just as easily remove the MAF upper part# 280 217 810 by itself. Toss away the bracket. It's not needed and has been discontinued.
Really beautifully made video. Thank you so much!
Thank you for the kind words Richard B!
I assume if you just need to clean the MAF sensor you can just remove it and not the whole assembly to get to the throttle body? I mean just unclip the MAF from the electrical connector and bottom bracket leading to the throttle body?
Great. Works like magic.
Will cleaning the mass air flow make you car acceleration better or should i just change the throttle body have issues acceleration
Can I spray the sensor without removing..seems easier..thanks
Hi Efe Evue, Yes you can. I would recommend to wait 10-15 minutes before turning on and starting the car just to make sure any traces of liquid residue has evaporated first.
Impressive video
Thank you Hussam!
Can I remove the engine cover and spray the sensor? Also have you used seafoam? I was thinking about buying some and pouring it in the gas tank whenever I need to fill up again
Hello Nick, Yes, if you're in a hurry you can just remove the engine cover and spray some MAF or Electronics parts cleaner on the sensor. Regarding Seafoam, I have never used Seafoam on a mercedes engine. I have used BG44K Platinum right before I started a 2,500 mile road trip in the Mercedes S500 and it ran great! For BG44k you just need to apply it to the fuel tank. One bottle treats a full tank. Hope this helps. Cheers!
Nice detailed video, but couldn't you just unscre the two bolts on the sensor and pull it out?
Is this the caused of bad acceleration or throttle body
Good video but I must say the v8 cars are a walk in the park compared to the V6 m112 engines. There is so little space to work with.
How often should I do this? How do I when I should clean it.
Hello Alexie Diaz! I recommend cleaning the MAF sensor every 10,000 miles and also when you change the air filters. Another way to tell if it's time to clean the MAF sensor is when the engine shakes a bit more than usual at idle. Keep in mind though that engine shake can be for a number of reasons, but sometimes cleaning the MAF sensor helps. Cheers!
I find my connector is really hard to remove, I'm a bit scare to wiggle it. Can't disconnect it... Are there any tip? is it really that hard to remove?
I am literally stuck on step one, unplugging that terminal is excruciatingly hard. It has not budged no matter what I do. W203 C55
I wouldn't recommend pushing open the throttle it is very sensitive but the best method is to grab ahold of long enough stick that can fit from the seat of your car to push the pedal down to get a better cleaning of the throttle or if you have someone to do so would work best lol 👊😷👍
So if the mass sensor isn't the problem will it be throttle body that will need to be changed?
Man my gas pedal is not accelerating and I just got a new battery so it says charge it everytime I try to go in gear
Is this working for w124 e320 m104 engine ?
Can someone please provide the part number for the breather hose shown in the video with the pink arrows that connects to the MAS body?
Can you help me..? I bought a MB 190 E 2.3 16 from Spain and brought it top Mexico City, the problem is alttitude, therefpre the car is not idling proper, from sea level to 8000 feet above sea level, the old opwner tells me to find this little like clock to settle the new alttitude but i can´t find it, not where the batterie is neither around the headlights, where he told me too.. please.. HELP¡¡¡¡
Hello Alberto Calderon, I'm sorry to hear you're having difficulties with your car. I'm not familiar with the 190 E 2.3 16. I recommend you visit mbworld.org/ Everyone on that forum is very knowledgeable and can help you fix your car.
i was under the impression that its bad to touch the throttle body plate i want to clean mine but dont want to damage it 2003 c240 please clarify
Hello V R, Not to my knowledge. I would double check with the people over at mbworld.org/forums/ I've cleaned my throttle body and plate many times and the car only runs better :) I hope this helps. Cheers!
@@GarageDynamics i was under the impression that electronic throttle bodys can be damaged if you push in the plate for cleaning thats why they are best removed trust me i dont want to go through all that if i can press the plate and not break it i was delighted when i saw you do it that way i just wanted to double check
Hi guys i have a cl55 amg super charger 2003 can't find were is the air intake injection sensor ? Any one knows thanks guys.
Hope to get this done soon on my S500
Hi +cheytown03,
The sooner the better :)
SkipArtPictures I have 2010 merc gl450, I live in St Kitts I have to fly in engineer from Puero RICO, done it twice after he goes I'm left with another problem, racing radiator fan is the latest, as you have been asked before would I be ok to clean without removing please
great vidio. "thurough" . left no details out. thank you.
Thank you Robert Angeleri!! I'm glad to hear that :)
Can you clean the throttle body with brake cleaners?
Hello Reverse Light, Please do not use brake cleaner. I would recommend using throttle body cleaner or MAF cleaner. I hope this helps. Cheers!
@@GarageDynamics thank you so much
@@Furious_Mage You're welcome :)
hey, the mass air flow sensor bracket on my 02 c240 mercedes is broke and i've looked everywhere on the internet for a new or atleast a used one and can't find nothing. do you have any ideas where i could get one?
ICEFOOL junk yard maybe?
You don't need it. It's been discontinued.
$5 everywhere NEW
Why can't you just take the top part off and clean or replace the maf?
Hello EdtheRaiderfan Cunningham, The top part of the MAF has a metal screen that is built into the MAF. It's also there to protect against damage to the MAF sensor. It is very delicate and just touching it with too much pressure can possibly damage it. I hope this helps. Cheers!
@GarageDynamics thank you for the response. I went ahead and changed the whole unit as suggested along with my fuel pump and filter along with my crankshaft position sensor. Car kept shutting off while driving. It seems fine now, but it's only been a couple of days. 🙏🙏🙏
@@MrEdtheraiderfan You're welcome! That's awesome! Yeah, for some reason I know with the S500, at 150k the crankshaft position sensor goes out and the car will shut off at idle, or fuel cut while driving, giving it the feeling like you are stepping on the brakes while driving. I hope all is well now and you get lots of good fun mileage out of your Mercedes 🙏🙏🙏
Hello sir. Just wanted to update you on my 2006 S500. It seems that all the work I had done didn't stop my problems with the car stalling. I really don't know what to do now. The vehicle doesn't act up nearly as much as before, but it will cut off still while idling. Two days ago, the car cut off while driving on the freeway. If you have any additional advice, I'd appreciate it. Have a good one bro...
I have a 06 R350 with a MAF sensor check engine light on , can someone help me out , Thanks
Is this hard???
Uh, unplug the MAF?
Merci beaucoup your video so helpfull in France we dont this ...... thanks
Thank you Alexandre Quach! You are very welcome! I wish my French was better lol! Cheers!
Busted the clamp, do you know where I can order a new one.
You don't need the clamp. (Bracket 112-141-04-40) It's been discontinued.
can i spray clean ir without removong it
+iris lopez Hi! Yes, You can spray your MAF sensor while its still connected to the throttle body (assuming you have removed your air box). I would just recommend that you hold off on starting the car for at least 10 minutes. That will give the cleaner a chance to evaporate, so that it doesn't get pulled into your engine.
+SkipArtPictures. thanks;)
Anytime Iris!
Will this help my cLk Mercedes acceleration better
Spraying silicone around a MAF sensor is not a good idea. Spray some on your finger and wipe it on the areas required.
Wish u showed where its actually located lol
Also wish we were told about the throttle body and a bit more expansion on that
If it works...don`t touch it
Let me tell you this process on the clk 500 is soo damn fucked, 😭😭😭
e320 png