I stopped watching Barum engines, every week there seemed to be some new drama around warranties or a customer trying to scam them, it felt like drama farming so I tuned out.
He's just showing the full aspect of engine machining. The good and the bad. Once you've seen an engine being worked on you've seen them all. Will CTM tell us the truth and say they have warranty issues in the passed or not. At least Barum are telling us the truth. ( and use microphones so we can hear them)
Lee sent me over... His channel talks interesting. Your channel seems to DO interesting. VERY nostalgic considering I did my engine re-builder apprenticeship back in the early 70's.
Finally someone who knows what they are doing! Barum do not appear to be engineers, and an admission that one cannot operate a machine tool is telling.
If you're filming these videos on a phone turn it 90 degrees so its using the full screen,other than that I'm loving this channel.Bit more machining going on than on Lee's channel.
great video guys, ive got one of your full race heads on a pinto ive built, its a work of art with all the porting and the valves are like dinner plates.
I like watching barum engines find it informative and entertaining at the same time . Let them do there thing you do yours simple I Also liked watching this vid so iI’ll see how it goes 👍
I would not send an engine anywhere near Barum as anything he touches tends to have quality problems that ends up with endless customer complaints and court cases / letters etc. His video's do absolutely nothing to give confidence in his business.
He's just showing the full aspect of engine machining. The good and the bad. Once you've seen an engine being worked on you've seen them all. Will CTM tell us the truth and say they have warranty issues in the passed or not. At least Barum are telling us the truth. ( and use microphones so we can hear them)
Trouble is he ain't got the gear! Have you seen their 1935-40 boring machine! Even Lee calls it a Heath Robinson set up lol Their machining practices are a fucking nightmare and now they have an apprentice, in the shape of Isaac, lad has quite a bit of talent for the job, but he's being taught some shitty practices. Like l when facing a flywheel, not using the reverse jaws and using normal ones and having six miles of the jaw hanging out of the chuck to get the flywheel in. Serious accident waiting to happen there. And that's just one example. If he were to go elsewhere to work in a modern workshop he would be called out because he's not been taught correctly. Fortunately he does go to college one day a weeks so at least he will learn some safety practices there.
Like how can you go to court with water tight evidence in your favour and loose. Maybe he's too trusting and people take advantag., Tthese days people seem to que up to exploit anything exploitable. But yeah they do go on
Ha Ha locktite !!! MMMM nice well there is a good thermal barrier to cause a load of stress but anyway who ever used a thou per inch of bore interference and good old liquid nitrogen ???
Just found your channel and subscribed. I ditched Barum engines a fair while ago now, I think it was after the video that Lee posted where he was out in his Lamborghini and said that he was a shy sort of guy who didn't really like attention. Barum is an annoying, click-bait ridden channel which is 10% about engines and engineering and 90% about supposed drama relating to awkward customers and Lee trying to convince everyone of how good he is.
I think it was on Westchester Crank where the tested it out and found that on the block they tested it made little difference but I guess not all blicks are made equal
A couple of things. The video title "calling out Lee from Barum" really is awful clickbait, change it if you can. Also, why didn't you freeze the sleeves before fitting them? The hydraulic press you used was basically hammering the sleeves in and "shocking" the block. A high enough constant pressure on the press to smoothly slide the sleeves home is surely better. Good to see some machining, it reminds me of the first 10-12 years of my working life as a apprentice then toolmaker until I moved to design and the drawing board (yep that was in the days before CAD!!)
I'm neither a mechanic or an engineer so excuse my ignorance but would freezing the sleeves not make them brittle? Direct sunlight on a summers day might heat the block enough to widen the bore sufficiently to slide the sleeves in easier.
It doesn’t take many views of barumm engine’s vids to realise it’s the last place I would ever send an engine to have work on an I never watch them anymore
100% agree, I would not send an engine anywhere near Barum as anything he touches tends to have quality problems that ends up with endless customer complaints and court cases / letters etc. His video's do absolutely nothing to give confidence in his business.
I completely fail to see how, or where you were " calling out lee from @BarumEngines ". If it was a clickbait title hoping to draw people in, it's chased this one here away. Goodbye.
What's the biggest valve your unleaded exhaust seats will take? Also, I thought loctite was a "threadlocker", does it work in that application with the liners? 😎👍
Nice to see just the engineering rather than bios or business. If Barnum did the same it would be better for the viewer and their business? Seems to have set themselves out to be an easy touch for free work by accepting iffy warrnty claims IMHO.
Aren't those Stag heads designed to warp like wet wood if they drive too close to a candle or a hot cigarette?? A cup of tea that's a little too warm? Lol. Here in the states we could NOT keep Triumph V8's running, those were strictly fair weather cars on this side and that's a real tragedy because the cars themselves I always found to be quite good
working in a garage is a soap opera, there all the same. but why are you spouting out other name ?? what have they done to you lol when dealing with customers with warranty they always expect more. understand the trade before slagging it off
Hang on skip through this but calling out lee what's that about?????? I love watching Barum engines straight honest to the point. Bit of advise sell your own business no problem don't dis another very unprofessional.
@@keldean76 No it's the click bait I am talking about do you need to do this to get viewers????? as for key board warrior you have the wrong man. I say it as it is and what I see if you can't take a comment don't put stuff on youtube simple.
@@andypandy955 Your defending Lee and unhappy with the click Bait on this channel? Lee is a master of click bait, calling everyone Karens. Customers, businesses, YT viewers, etc, he angers everyone for views, which is one reason why so many dislike him.
Unsubbed Barum ages ago, low quality workmanship, click bait channel. James & his lad Sam @ Grace Engines have a cracking channel. Subbed mate, this looks the real deal work wise.
It's really interesting to see people assembling engines, Subi Performance is a good channel and his workshop is amazing as is his collection of machining tools, its also clean enough to be an operating theatre, the billet engine blocks he sometimes uses are works of art.
I got to barum channel by chance after watching a engine build. What us the point of that channel, it's only about issues or problems. It must not do his rep any good. Even if the issue was not his direct fault. Shiw how you build engines, not constant talk about problems
I’m another one who unsubscribed to Barum. My wife is called Karen. My friends wife is called Karen. Lee kept referring to ladies he found difficult as ‘Karen’s’. Called him out a couple of times but he just kept on doing it, so unsubscribe I went. I spent nearly £30K on engine work for a project last year, so Lee if you read this, that’s what your attitude cost you.
This comment is literally by definition a "Karen" comment. From this day forth Steve you shall be known as Karen! Neither this or Lee's channels are worth watching for anyone wanting highly precise work.
I used to watch barum for education on engine building but the channel has just become a joke . it would seem every engine that goes out has a problem or the customer isnt happy becomes very boring when every video is the same old story .
Hi there, I have not watched your channel before, after watching and ACTUALLY seeing some engineering work in progress I am now a convert from Boring Barum, listening to Lee going on about his mental health and chatting about boxes full of engine parts that they have just finished "Tricking Out" with no active engineering content was getting incredibly boring to the point that I had virtually stopped watching them.
We’ll have to agree Barum engineering is nothing more than click bait and guess work from what I see, they are just rebuilding a 3.0 diesel Range Rover engine but with no warranty what a joke!!!
@@ctmperformanceengineering I must say that I did like the concept of the twin rollers that Lee uses to centre the liner pressure ... However, I am unsure to what extent that it is necessary. Your work does come highly recommended though ...
He doesn't show you the ones stuck half in half out because he can't measure the interference fit. At one stage he was end gapping rings not realising that the spec was "per inch or bore" . Never seen an engine run after going through their mangulating process...when shrigley engineering has a little water brake dyno to break an engine in and Barum turns them over once with 4' bar and hopes the lumps wear off before it seizes up.
Won't take any criticism....instant block. I don't have an issue with older machinery but his old junk is a joke....I bet the machines aren't even level. Don't start me on the wibble wobble balancer....try explaining that balancing has tolerances based on mm/sec² , not just "ooh that's not bad is it mate?" - I bet everything he balances he makes worse. The concept of shrink or expansion fit is beyond them...just nosh it in with a big hammer. I remember him doing a vid on one of the Pakistani shops....ironically they did better than he did.
Should be a "Shout out", a "Call out" is normally for negative, like you are calling Lee out for being a bellend or something!
Yeah I was waiting for you to slag him off.
I stopped watching Barum engines, every week there seemed to be some new drama around warranties or a customer trying to scam them, it felt like drama farming so I tuned out.
i thought that without even watching a single video 🙄
Thought it was just me when I unsubscribed from Barum Engines due to boring click bait.
He's just showing the full aspect of engine machining. The good and the bad. Once you've seen an engine being worked on you've seen them all. Will CTM tell us the truth and say they have warranty issues in the passed or not. At least Barum are telling us the truth. ( and use microphones so we can hear them)
Its low rent clickbait, and really only for the simple minded! Lee is con artist.
@@humourless682 and everyone posting on youtube are guilty of the same
Nick showed engineering in action, along with a detailed commentary. His efficiency puts Barnstable to shame.
Subbed.
I had a valve insert drop out on a LR SIII. Impressively memorable destruction of engine and full sonic soundscape.
Lee sent me over...
His channel talks interesting.
Your channel seems to DO interesting.
VERY nostalgic considering I did my engine re-builder apprenticeship back in the early 70's.
Hello from central France,
Came here from Barum..
I swear I can smell the machining..
Liked and subscribed
Cordialement,
Also stopped watching the drama queen that lee became .
This looks altogether better , crack on .
Finally someone who knows what they are doing! Barum do not appear to be engineers, and an admission that one cannot operate a machine tool is telling.
Barum are clickbaiters pure and simple, and seem to have a very bad reputation.
You do not half print some crap. Clearly you are not skilled in what you do.
@@tellitasyouseeit7555 Maybe he should go for a job at Barum then? They like workers who dont have a clue............
After all the criticism of Barum engines click bait titles, this has got to be biggest of them all, as a way to get views and subscribers 😂😂
Boy, you sure called Lee out.
Very interesting and clear. Thank you. I've subscribed and am looking forward to more!
If you're filming these videos on a phone turn it 90 degrees so its using the full screen,other than that I'm loving this channel.Bit more machining going on than on Lee's channel.
We are starting to do this, we are learning as we go 😂
Also the camera focus was way out on the closing shot.
I just love craftsmanship!!!
great video guys, ive got one of your full race heads on a pinto ive built, its a work of art with all the porting and the valves are like dinner plates.
Lee from Barum recommended you, so I thought I’d come on over and subscribe
Far better entertainment than the hot air barium engines.
I like watching barum engines find it informative and entertaining at the same time . Let them do there thing you do yours simple I Also liked watching this vid so iI’ll see how it goes 👍
I saw my m113k head there. Thanks Charlie and the team
I would not send an engine anywhere near Barum as anything he touches tends to have quality problems that ends up with endless customer complaints and court cases / letters etc. His video's do absolutely nothing to give confidence in his business.
He's just showing the full aspect of engine machining. The good and the bad. Once you've seen an engine being worked on you've seen them all. Will CTM tell us the truth and say they have warranty issues in the passed or not. At least Barum are telling us the truth. ( and use microphones so we can hear them)
Another talking turd with no clue.
Barum killed more cosworths than enough mans a menace all the gear with no idea 🤷♂️
Trouble is he ain't got the gear! Have you seen their 1935-40 boring machine! Even Lee calls it a Heath Robinson set up lol Their machining practices are a fucking nightmare and now they have an apprentice, in the shape of Isaac, lad has quite a bit of talent for the job, but he's being taught some shitty practices. Like l when facing a flywheel, not using the reverse jaws and using normal ones and having six miles of the jaw hanging out of the chuck to get the flywheel in. Serious accident waiting to happen there. And that's just one example. If he were to go elsewhere to work in a modern workshop he would be called out because he's not been taught correctly. Fortunately he does go to college one day a weeks so at least he will learn some safety practices there.
How many has he killed?
Loads of content, great video
Nice content, just a small request, music is very loud compared to speech, otherwise great.
Visiting from Barum Engines on recommendation to support your new channel ...
Barum reminds me of the two mechanics lance and something off early Harry Enfield 😮.
Like how can you go to court with water tight evidence in your favour and loose. Maybe he's too trusting and people take advantag., Tthese days people seem to que up to exploit anything exploitable. But yeah they do go on
U need to balance recording volumes out - voice is soft and then music blasts
be interesting to know how your pricing compares Barum?
Come over to you from Lee's recommendation on Barum engines
Subscribed... Great to see a proper engineering workshop working
This is better than lee’s channel, you actually show us machining, Lee mainly talks about what he’s going to do
Ha Ha locktite !!! MMMM nice well there is a good thermal barrier to cause a load of stress but anyway who ever used a thou per inch of bore interference and good old liquid nitrogen ???
You definitely need a better camera apart from that its looking great nice commentary and insight to workshop environment
Just found your channel and subscribed. I ditched Barum engines a fair while ago now, I think it was after the video that Lee posted where he was out in his Lamborghini and said that he was a shy sort of guy who didn't really like attention. Barum is an annoying, click-bait ridden channel which is 10% about engines and engineering and 90% about supposed drama relating to awkward customers and Lee trying to convince everyone of how good he is.
Looks good the work you are doing 👍What are your thoughts on boring engines with/without torque plates ? Thanks
I think it was on Westchester Crank where the tested it out and found that on the block they tested it made little difference but I guess not all blicks are made equal
@@whitemonkey7932 I'll have a look, thanks👍👍
A couple of things. The video title "calling out Lee from Barum" really is awful clickbait, change it if you can.
Also, why didn't you freeze the sleeves before fitting them? The hydraulic press you used was basically hammering the sleeves in and "shocking" the block. A high enough constant pressure on the press to smoothly slide the sleeves home is surely better.
Good to see some machining, it reminds me of the first 10-12 years of my working life as a apprentice then toolmaker until I moved to design and the drawing board (yep that was in the days before CAD!!)
I'm neither a mechanic or an engineer so excuse my ignorance but would freezing the sleeves not make them brittle? Direct sunlight on a summers day might heat the block enough to widen the bore sufficiently to slide the sleeves in easier.
It doesn’t take many views of barumm engine’s vids to realise it’s the last place I would ever send an engine to have work on an I never watch them anymore
100% agree, I would not send an engine anywhere near Barum as anything he touches tends to have quality problems that ends up with endless customer complaints and court cases / letters etc. His video's do absolutely nothing to give confidence in his business.
Negatuve comment.......volume levels need adjusting, between music and speech. Otherwise great content,,,,cheers.
I completely fail to see how, or where you were " calling out lee from @BarumEngines ". If it was a clickbait title hoping to draw people in, it's chased this one here away. Goodbye.
What's the biggest valve your unleaded exhaust seats will take?
Also, I thought loctite was a "threadlocker", does it work in that application with the liners?
😎👍
Nice to see just the engineering rather than bios or business. If Barnum did the same it would be better for the viewer and their business? Seems to have set themselves out to be an easy touch for free work by accepting iffy warrnty claims IMHO.
Proper engineering content in a professional workshop environment. I have just subscribed.
Aren't those Stag heads designed to warp like wet wood if they drive too close to a candle or a hot cigarette?? A cup of tea that's a little too warm? Lol. Here in the states we could NOT keep Triumph V8's running, those were strictly fair weather cars on this side and that's a real tragedy because the cars themselves I always found to be quite good
Lost faith watching Barum now,the channel has turned into a soap opera.
working in a garage is a soap opera, there all the same. but why are you spouting out other name ?? what have they done to you lol when dealing with customers with warranty they always expect more. understand the trade before slagging it off
Guys, need to equalise the volume of the music. It is far too loud.
interesting video
you have Built a few red tops for Colin Smith. Brilliant engines.
We have indeed he was really quick yesterday
@@ctmperformanceengineering my late dad used to sposor colin .is nick still with him ?.
@@onlyme8001 who was your dad? And he is indeed
@@ctmperformanceengineering Brian. Time when colin was in nat hot rods.
Call it out man..
Hang on skip through this but calling out lee what's that about?????? I love watching Barum engines straight honest to the point. Bit of advise sell your own business no problem don't dis another very unprofessional.
They didn't dis Barum.
think you need to watch the video no dis they do lees work….it was tongue in cheek! another keyboard warrior jumping to wrong conclusions smh
@@keldean76 No it's the click bait I am talking about do you need to do this to get viewers????? as for key board warrior you have the wrong man. I say it as it is and what I see if you can't take a comment don't put stuff on youtube simple.
ain’t youtube full of click bait ?
@@andypandy955 Your defending Lee and unhappy with the click Bait on this channel? Lee is a master of click bait, calling everyone Karens. Customers, businesses, YT viewers, etc, he angers everyone for views, which is one reason why so many dislike him.
Nice Work Chaps
Nice one thanks
Unsubbed Barum ages ago, low quality workmanship, click bait channel. James & his lad Sam @ Grace Engines have a cracking channel. Subbed mate, this looks the real deal work wise.
It's really interesting to see people assembling engines, Subi Performance is a good channel and his workshop is amazing as is his collection of machining tools, its also clean enough to be an operating theatre, the billet engine blocks he sometimes uses are works of art.
@@markgallagher5908 Ill have a look mate, cheers.
@@Jim_M_75 Most of his videos are in German but some of the older ones are in English also.
That's a Serdi 100 and not many people know that... !
I got to barum channel by chance after watching a engine build. What us the point of that channel, it's only about issues or problems. It must not do his rep any good. Even if the issue was not his direct fault. Shiw how you build engines, not constant talk about problems
Good to see you have a Serdi for your seat works
I’m another one who unsubscribed to Barum. My wife is called Karen. My friends wife is called Karen. Lee kept referring to ladies he found difficult as ‘Karen’s’. Called him out a couple of times but he just kept on doing it, so unsubscribe I went. I spent nearly £30K on engine work for a project last year, so Lee if you read this, that’s what your attitude cost you.
Hahahaha wow
This comment is literally by definition a "Karen" comment. From this day forth Steve you shall be known as Karen!
Neither this or Lee's channels are worth watching for anyone wanting highly precise work.
Karen is now a well known term for a righteous, complaining person. It would be annoying for people named Karen though.
Don't need loctite on a liner if it's machined properly! Simples.
I used to watch barum for education on engine building but the channel has just become a joke . it would seem every engine that goes out has a problem or the customer isnt happy becomes very boring when every video is the same old story .
Drivel spoken again. Try talking facts.
Great loved it, but boys stop using a potato to film it on
Hold the phone in landscape
Hi there, I have not watched your channel before, after watching and ACTUALLY seeing some engineering work in progress I am now a convert from Boring Barum, listening to Lee going on about his mental health and chatting about boxes full of engine parts that they have just finished "Tricking Out" with no active engineering content was getting incredibly boring to the point that I had virtually stopped watching them.
We’ll have to agree Barum engineering is nothing more than click bait and guess work from what I see, they are just rebuilding a 3.0 diesel Range Rover engine but with no warranty what a joke!!!
Good content, presentation needs some work but that will just take practice. Good luck.
Nice video, might call out Barum meself like :) See if it kicks my channel off too ...
Yeah start keeping the phone sideways when you film
Pinto in a Tranit was very almost builder proof😂😂😂
Thank you 👍
Music is a BIG NO NO .
Christ that liner fitting was sketchy than at Barum!!😂
Thanks for you uplifting and positive vibe…
@@ctmperformanceengineering I must say that I did like the concept of the twin rollers that Lee uses to centre the liner pressure ... However, I am unsure to what extent that it is necessary. Your work does come highly recommended though ...
He doesn't show you the ones stuck half in half out because he can't measure the interference fit. At one stage he was end gapping rings not realising that the spec was "per inch or bore" . Never seen an engine run after going through their mangulating process...when shrigley engineering has a little water brake dyno to break an engine in and Barum turns them over once with 4' bar and hopes the lumps wear off before it seizes up.
Yep. It's pretty boring.
Good show, you certainly Cut The Mustard!
Why would anyone use barum? They upload 4 videos a week of unhappy customers.... they can't all be wrong. Guy is a toolbox!
Won't take any criticism....instant block. I don't have an issue with older machinery but his old junk is a joke....I bet the machines aren't even level. Don't start me on the wibble wobble balancer....try explaining that balancing has tolerances based on mm/sec² , not just "ooh that's not bad is it mate?" - I bet everything he balances he makes worse. The concept of shrink or expansion fit is beyond them...just nosh it in with a big hammer. I remember him doing a vid on one of the Pakistani shops....ironically they did better than he did.