13-19 Ford Interceptor Sedan Radio Aux-Enable
Vložit
- čas přidán 3. 09. 2023
- Disclaimer: This video is in no way meant to be taken as a professional video or recommendation. Do not attempt anything depicted or shown in this video unless you know what you're doing. I do not take any responsibility for anything that results from you using the information in this video.
This video will cover the general basics of how to enable the Radio Aux or "Line In" function of the 2013-2019 Ford Police Interceptor Sedan vehicles including the wiring and programming of the FCDIM module.
If you would like a more in depth video on this process, let me know in the comment section below.
Links:
Aux Wiring Harness (I used this one because it came with the pins I needed, was next day delivery from amazon and was super cheap. Only drawback is you have to take the pins out of the white connector. I used a small zip-tie to do that but you may have a tool or other solution)
rb.gy/pd2ht
Another version of the wiring harness from another company with the correct pins and no plastic connector:
rb.gy/dfpg8
NOTE: On both versions of the wire harness, the lone black wire is the wiring diagram's blue wire. The red and black combined wire is the red wire, the white and yellow wires are their respective colors.
Wiring Diagram: t.ly/8csWW
OBD-LinkEX Adapter: rb.gy/b04jz
Forscan Program: rb.gy/zjaqa
Original video of Aux Enable using forscan: rb.gy/qkcky - Auta a dopravní prostředky
Hey man my auxiliary cable u put on the link from Amazon just arrived can’t wait to try this already enable aux on the forscan and it show line in 😆 hope this work for me install it
Thanks for this man getting me a Taurus soon another one have a explorer as right now
Right on!
@@GT-IndustriesI did get me a Taurus finna order the stuff man
@@B711HD Awesome! Let us know how it goes!
Been searching everywhere for the type of pins the radio harness needs. I've gone through returning two 'all in one' pin kits from amazon but none of them are small enough. Hope your suggestion from amazon works for me, thank you
Just to clarify, you'll need to unpin the wires from the connector that the amazon one comes with without destroying/damaging them and then re-pin them into the back of your radio.
The video is very informative thank you , it’s just the diagram link won’t load
Try it now. I have uploaded a new link for the diagram.
What adapter did you use to hook up to the aux cord. Where can I buy it and what kind? Can you send a link please? Thanks
Can you please make a in depth tutorial I just got my 2013 Ford Taurus police interceptor that doesn’t have an aux input and I’ve been looking for a video like this because I’m tired of using an FM transmitter to sync my phone to the radio. I appreciate it so much thanks for your help
I'll start the process of capturing all the video and hopefully get one up this weekend if time permits.
same, did you find a solution?
Quick question I also be hearing a beeping of noise when aux when nothing pay does that happen to u
Or is cause I’m using a Bluetooth aux port thingy
@@B711HD It does not happen to us on any of our test vehicles. We have used bluetooth to Aux adapters without issue as well. I would try using a regular Aux cable with an adapter directly to your phone if your phone does not support Aux directly (Most phones nowadays require a USB-C to Aux or some other adapter) and see if the beeping continues. If it stops then I would assume it is your Aux to BT adapter.
Why didn't you just hook up to bt? I have the same radio and it works fine.
This radio was not equipped with Bluetooth.
Hey man so I install it but thing is only hear passenger sides speaker playing
Make sure the pins are all pushed in to the plastic clip of the radio harness. Also, pull on the pins/wires to see if they slide back out. They have a tiny little piece of metal that bends out to keep them held inside the factory harness connector. If that piece of metal isn't bent slightly out from the pin or if the pin is not inserted with the proper orientation, the pin can slide back out of the factory harness conector.
If the pin is able to freely slide out, when you plug in the harness back to the radio, the pins on the radio will push the pins in the harness back out.
@@GT-Industries hey thanks man got it to work that was a quick respond u save my day lol I wasn’t in all the way
@@B711HD no problem, we're here to help.
I have a 2014 3.7 Interceptor Sedan. When I bought it the AUX and radio worked but the radio screen was blacked out. I bought a radio from ebay, now my radio and screen works but my AUX will not. When you push the button it says AUX enabled but it will not work. I even tried the program with Forscan, still nothing. Any idea what is wrong?
Could be a wiring issue. check the wiring diagram in the videos we have and see if they match. If not then try wiring an AUX input to those and see if it works. There's not really a fix all solution to your issue with it being so unique but hopefully that helps. You may also want to try verifying the model of radio that you got is actually for the same year, make, model and package of vehicle you have. Sometimes they don't play well when not matched correctly.
@@GT-Industries The radio still works, and the cd player still works, and the radio face says AUX audio when I push the button so it's still programmed and wired into the car but the AUX will not work. Kind of strange since I didn't change anything else. I'll get in touch with the seller, thanx.
@@whitestratman3158 You may want to double check the wiring. The AUX function and screen saying AUX means the radio is programmed for it but just because it is programmed and displays AUX does not mean the wires are actually connected. You can have everything working but the wires be disconnected for that specific function. We have run in to that in the past on other vehicles. Commonly it is caused in police cars due to non-stock wiring being installed or uninstalled and damage occurring to the stock harness. That's why we recommend checking the wiring to verify it's connected.
@@GT-Industries Well, that's just it. I didn't touch any other wiring except the one loom that plugs into the back of the radio, everything else is hidden behind the panel and cd player. I did twist those two purple wires together on the bottom to get the horn working at the same time. So, I went back in the bottom and put those back the way they were and no change. The usb outlet above the aux outlet on the dash (in the same mount) isn't working BUT I never tried it before all this because I'm using the 2 -12V below the heat/AC. I wouldn't think one would have anything to do with the other because I can't see the auxiliary wire being powered and I can't find a fuse to either one. Just something really stupid and really aggravating that shouldn't be but, unfortunately it is 🤬 I may end up having to hard wire it in with another cord like you did. 😫
That’s do g to much