I Armando Rabino Academia student I still focus in watch a video, to How adjust a valve clearance. Now My knowledge is more learn and add My personal experience in this day. I more thank you.
Video states "turn flywheel until the locating bolt drops into the flywheel , now #1 piston is at Top Dead Center, compression stroke or exhaust "(TDC). Adjust Intake valves Cyl 1, 2, 4. Adjust exhaust valves Cyl 1,3,5. ROTATE FLYWHEEL 360* (360 Degrees), Now adjust Intake valves 3, 5, 6 and Exhaust valves 2,4,6. . QUESTIONS. Since the flywheel was rotated 360*, has the camshaft rotated 180* ? QUESTION How about tips on doing this on an installed Engine? How would one rotate the engine and find TDC #1 Cylinder on compressions stroke? Are there markings? Can this engine be rotated by hand? At what engine temp should valves be adjusted on a Cat 3124? Ambient temp, cool engine? Thanks Mike C.
You can run valves on hot or cold I set mine on cold because heat expands things and hit engines burn you as for finding correct stroke if your on compression #1 would be lose and #6 intake will start to rock open if it’s a gas engine pull #1 piston will break down right when #6 intake opens I use a screwdriver or piece of tubing never set a valve that’s on lobe rocker arms will be lose.
Plz sir tell me the firing order of gep 65_3 olympian perkins generator and how fast and low speed rpm on delphi pump 1390 2003 model and plz make video i m waiting
Fisrt roundIntake 1-2-4 and exaust 1-3-5 And second intake 1-2-4 and exaust 1-3-5 First round will take fan side to flywheel side and second round take flywheel side to fanside
I Armando Rabino
Academia student
I still focus in watch a video, to
How adjust a valve clearance. Now
My knowledge is more learn and add
My personal experience in this day. I more thank you.
what would be guage for intake and exhaust ?
I'm have a problem with #3 exhaust. Push rod is backed off all the way and I cant get the feeler gauge between rocker arm and bridge
Good Job,Thanks
Thanks alot Sir , really it's good working .
Thank you for the comment!
Sir I'm helpless plz help may I adjist same process on p100 Perkins mechanical engine ??
GOOD JOB SIR
Quiero saber la,calibración del 3114 cat
Good job sir
What is the valve Clearance intake and exhaust
Good sir thanks
Video states "turn flywheel until the locating bolt drops into the flywheel , now #1 piston is at Top Dead Center, compression stroke or exhaust "(TDC).
Adjust Intake valves Cyl 1, 2, 4. Adjust exhaust valves Cyl 1,3,5.
ROTATE FLYWHEEL 360* (360 Degrees), Now adjust Intake valves 3, 5, 6 and Exhaust valves 2,4,6. .
QUESTIONS. Since the flywheel was rotated 360*, has the camshaft rotated 180* ? QUESTION How about tips on doing this on an installed Engine? How would one rotate the engine and find TDC #1 Cylinder on compressions stroke? Are there markings? Can this engine be rotated by hand? At what engine temp should valves be adjusted on a Cat 3124? Ambient temp, cool engine?
Thanks Mike C.
You can run valves on hot or cold I set mine on cold because heat expands things and hit engines burn you as for finding correct stroke if your on compression #1 would be lose and #6 intake will start to rock open if it’s a gas engine pull #1 piston will break down right when #6 intake opens I use a screwdriver or piece of tubing never set a valve that’s on lobe rocker arms will be lose.
أخي قطع موفرا ومكنة بعدها نظيفه جديده كيف لك نفس في العمل
Nice bro
Plz sir tell me the firing order of gep 65_3 olympian perkins generator and how fast and low speed rpm on delphi pump 1390 2003 model and plz make video i m waiting
How many cylinders pls
cat g3306 valve adjustment PDF send Plesse Sir
👌
Plz help me
Pleas start from zero c7 engine over haul
Ok good
Fisrt roundIntake 1-2-4 and exaust 1-3-5
And second intake 1-2-4 and exaust 1-3-5
First round will take fan side to flywheel side and second round take flywheel side to fanside
prem in both round you are setting tapit for same valve
@@6316645 yes
بدي ترجمه عربي 😭😭😭
آلَفُخٌ ـرَيّ ಔ 0662458330
@@adilcharki7497 سلام شحال فى الادمسيون اشحال فلي شبمون
3116
Waw
We want CTP spare parts in Pakistan
Please contact us at sales@costex.com!
After 3 k mills not dollars 🤣🤣
ى🎖🎗🎁🎀🎀🏆
Nice bro