Honeywell Wireless Thermostat Kit with Redlink
Vložit
- čas přidán 30. 01. 2022
- To learn more about the Honeywell wireless thermostat kit.
www.honeywellhome.com/us/en/p...
If you want more HVAC videos. Check out my playlist hvac tips for technicians.
Want to learn more about the red link Internet gateway.
www.resideo.com/us/en/pro/pro...
Micro Channel Repair Videos. Learn how to fix a microchannel coil.
• How to Repair microcha...
@honeywellhome @honeywell #hvacservice #honeywell #wirelessthermostat
Thanks, man. I'm installing this system on Monday, and this took a lot of worry outta my weekend. I do mostly small residential houses in a rural area. I've ventured out to the lake shore of Lake Michigan and want to give my customers the best. This helps a lot. Thanks again.
Glad I could help
Daddy Taddy saves my butt again. Love learning from you man really a big brother to the newer techs.
Going to install now. Hello from New York
God bless you young man for showing us about this wireless thermostat that doesn’t require hardwiring to the hvac system. Exactly what I was looking. 🤗🙏🏾.
Thank you my friend
Please share the video hit the like button
I sure will. I actually have a question. Is this Honeywell thermostat the only thermostat that has a wireless connection between the thermostat and the hvac system that you know of?
Yes
Thanks for the great video. I'm a former electrician up in Northern Maine. I have a bad t-stat wire that would need a lot of walls opened to replace it. This honeywell redlink system looks like exactly what I need. Thanks for the install lesson, I'm going to order parts now!
Very awesome man
thank you so much for watching
I'm glad I made this video
@@TaddyDigest would this redlink system work on a 2 wire (RH & W) system. The old t-stat (LUX TX500E) is connected to a relay box (TACO SR504) that runs an oil fired furnace. Thanks for any help, I don't see anything in the install manual that says for sure.
you could just connect a new thermostat and connect the transformer C to the new Honeywell red link thermostat
Man. You are very good. You should make videos all the time about everything.
Kevin thank you so much for your kindness
You don't have to lie to me though lol Just kidding
Thanks
I might start doing just that
Hey mane this video is a big help I’m in Chicago and I’m installing 2 of these tomorrow.
Yo Brain Thank you for watching I made this video for you
Stay Healthy Stay Happy Please
hit the like button May God Bless Tomorrow for you my brother
wireless is great when the run is long or very complicated due to construction.
Thanks for this video. It gives me a lot of confidence on the distance that it can cover. Im currently dealing with a home that was remodeled and since a couple of walls were taken down, The proper reading of temperature in the home is all out of whack.
very cool Glad I made this video
Thank you for watching 👀 😀
@@TaddyDigest where in TN are you located or operating in ?
I am in Camden TN 38320
It is 1.5 hours from Nashville
2.5 hours from Memphis
1 hour from Jackson
I like Your CZcams channel name Cool 😎
@@TaddyDigest Ah! I kind of know that whereabouts! almost familiar. Im planning to move back out to TN probably around the pleasant view area or maybe Ashland City.
My YT channel is pretty old but the content is non existent, im going to try to build it up like yours.. and create more content slowly but surely.
Cant wait to see your new videos my friend. Lets go
hot and cold spots due to thermostats not being located were the zone being conditioned.
w wireless thermostat u can also control the unit w phone tablet etc.
Thanks I’m Mohammad from Houston Texas
Hey Mohammad 👋
Just curious, no wireless remote temp sensors available for those existing stats? It seems like that would be more cost effective and allow for better mounting locations to get actual temp sensing from with the zone, while being tamper proof as well. With that said, Thank You for the video, and I will actually be installing one of these as a solution to an issue a client is having.
Can return sensor be installed on in floor heating return line?
Tad, I’m about to install 4 Wireless T-Stats. So the Unit will be going off the Return Sensor and the Thermostats can be placed in the Office and not directly in the Condition Space?
From Houston, I have a 3 wire, from two floors, to two separate heat pumps. The heat pumps require 4 wires. The HVAC company sold me a device that splits one of the wires to do two functions, but that device broke down about a year ago, and nearly destroyed one of my heat pumps. My options to get rid of that device, is to tear up my house and put a 5 wire link to each thermostat, OR go with this redlink. My primary question is, if the internet goes down, or if I lose power a few hours, is the recovery costly, or does it put my equipment at risk? I know I don't have risks if I simply go through the mess of adding a larger bundle of wires. Also, I'd kind of like to not have to power the thermostat with batteries. I think I can use the old 3 wire cable for power. Can you suggest a model, and address these questions please?
I had a new HVAC system installed last year and a honeywell stat that has 4 wire running to it.(no C wire). The system when in A/C mode will set there and run until I turn the stat up, but I have to turn it up 3 or 4 degrees or the temperature reading will jump a degree or 2 to match where I set it to. I know sounds crazy. It will also jump down and match within a degree or 2. SO... first I called honeywell thinking this must be a stat issue. They had me test the voltage readings of the 4 wires running to the stat. The 24v red was fine but one of the wires read lower like 9v and seemed to vary. Honeywell blamed the HVAC system as the problem. So I called the HVAC tech out and after thinking it was the wires running to the stat he checking the voltage readings at the unit with the stat wires removed, he got the same readings ( one circuit was low and varied) eliminating the wires to the stat as the issue. He then said it was an ECM module/motor.He did a warranty replacement of the ECM and said it's fixed. For some reason this issue takes a few hours before it acts up. Then the longer it runs the worse it gets. He finished the warranty repair and said even though the voltage is still low in one circuit the system was working fine, but the next day it did the same thing. I replaced the Honeywell stat again and it does the same thing also. Any ideas what I should do? I was thinking by installed a remote stat like you showed here the command from the remote stat would work to shut the system off and on correctly.
The link is not working. Could you update it? Thanks
HI...if you install the Red Link, I assume that is connected so you can use a cell phone. Thermostat then does not need it if you just want to connect via the wifi. I'm having issue
with cold air bouncing back to thermostat and does not run long enough. So hvac guy
thinking of moving the wires setup or maybe use this wireless system. My concern if I
were to sell, the internet equipmt goes back to Spectrum. I assume then the ac will not
work until new owner installs their equipment. Three AC/Units in 17-yrs & all keep getting
mold. I should have a 1.5/ton but they always install a 2/ton and don't consider the sqft of
the condo. Got this new older guy helping figure how to help me. Spent lots of 'money' and
no thanks to the thieving AC Companies in Florida. If I go with the wireless, I hope he can get
the return to pull out more air. Thanks for your video. I could not find at first anything about
these types of Thermostats. Friend mentioned the wireless. Thanks...good video
So I'm doing a job that has 7 wireless thermostand I'm going to get 2 redlink gateways. Is the customer able to Control all seven thermostats from the same gateway app
Will this E.I.M support multiple thermostats or is it one E.I.M per t-stat. I’m trying to control multiple taco valves for different zones.
-Cody from PA.
I am not sure
Does anyone know, will this device: THM4000R1000/U can connect with T10 Pro thermostat ?
Will this device: THM4000R1000/U can connect with T10 Pro thermostat ?
I bought THM5421R1021 and later I have learned this unit does not work with T10-Pro thermostat
I ran Into this today. I pulled my stat out and saw no wire put it on cooling and my unit came one I was like WTF LOL
redlink makes wireless thermostat bluetooth.
Can I connect two thermostats to the same EIM? Or do I need a whole new separate setup? It’s for zoning
I am not sure check out the manual
I currently have the same EIM unit, THM53020R, that you installed in this video. I want to add the Redlink Gateway to it. The manual for the Gateway you pointed to in your video says it can be used for a THM4000R wireless adaptor. My question is....Can the Redlink Gateway be used for my wireless adaptor, THM53020R, the same one you installed in this video? Thanks.
I'm not sure 😕
Hi, did you find an answer?
Any way to get the Mitsubishi MHK2 online without buying a separate Kumo Cloud adapter?
I am not sure
I can’t get the red link conected, it say need to get the thermostat register first. How can I do that. I have same system as you show, but when I enter re registration said error.
I think there's a number on the installation manual. You can call and discuss with customer service.
Hello, can is use this kit to bypass a wall thermostat that has only v+ and VG wires?
I don't think so 🤔
we have this thermostat installed at our home. We want to be able to control our thermostat for emergency heat, so I think we need a Redlink, do we need a sensor also? Or will it work directly from the Redlink?
I am not sure
So is the red link only if you want remote access?
yes
How do I connect the internet gateway to the actual thermostat? Mine is a Honeywell TH6320R
I will do a video on That soon
@@TaddyDigest I need a video for this too! I just got the internet gateway in the mail and can't find directions anywhere for connecting this thermostat!
I have a 2 family house, tenant upstairs, me downstairs. One zone heating. I want to be able to set the temperature from my apartment using a sensor reading the temperature in his apartment.
Does this thermostat have that capability?
I do not want him to adjust the temperature, but I want the settings I chose to heat his apartment.
Download the install manual
And check out the manual it will tell you can download it from Google
You can get thermostats that have wireless sensors
I have a customer who owns this and damaged his t-stat with water. Can i just replace the t-stat without the kit? Or does everything have to be replaced?
I am not sure if that sell just the T stat
@@TaddyDigest thanks i order the whole kit
Is this for an RTU only or residential also?
This can be used for residential or commercial.
2 ft away to connect.
Do I need the redlink for a single thermostat system?
no
What was the model number on that kit?
I'm not sure. Check the description
If I told you the serial number of my unit could you tell me what model I need
Bc a company want to install one on my place but they are saying it will be over 1k
JOIN Become a member and shoot me an email at tadfuller1@gmail.com
How do you connect the redlink gateway to the thermostat? i.e., how to enter wireless setup mode on the MHK1?
Download the manual and read instructions
I will do a video when I get a chance
@@TaddyDigest I have the manual. It provides instructions to connect to the redlink receiver connected to the air handler. Nothing about connecting to the Redlink Gateway.
ok got it I will check it out
@@TaddyDigest when you have the time, that wod be awesome. Thanks.
Deal I got you my Friend
how much did you charge for labor?
Not sure it's been a while
@@TaddyDigest how much will you charge if you are going to install it?
Right on, some information that might come in handy some day, I guess the key words in todays story is WIRE, SAVE, MONEY, LESS WORK, AFFORDABLE,LOL, right on T, another good video but I would of like it better if you would of Spartan kicked that package unit in the ass,or chunked that thermostat off the roof,lol
Thank you very much Jared
Rest assured my friend I will be kicking something soon and it will be on video Hahaha
WELL BE CAREFUL,I KICKED A WATER FURNACE TODAY AND ABOUT BROKE MY TOE, BUT FELT GREAT, IM GETTING BURNED OUT OF HVAC
Find a hobby your passionate about Jared. Set a new goal and make moves to get to the goal. Progress always makes me happy. Do cool shit.
I do not recommend he'll noo
I wonder if I'll need the sensor if I'm using this system for hot water heat... Do you know if you can just NOT CONNECT the sensor?
I'm not sure
@@TaddyDigest thx for the reply.. I'm researching for my next job. Thank you for replying buddy💪cheers from Pontiac Mi