How To Torch On Felt
Vložit
- čas přidán 11. 09. 2024
- This video walks you through the steps in installing and torching felt drips on a roof and making sure it sticks well to avoid water getting underneath.
Subscribe! www.youtube.com...
Check Out Our Channel Page: / videojugdiygardening
Like Us On Facebook! / videojug
Follow Us On Twitter! / videojug
Watch This and Other Related films here: www.videojug.co...
Well done Gary lad, that’ll make a nice easy rip up for the next bloke👍🏻
I had to come back just to see if this video was still here . Im about 1000% sure Gary ain't flat roofing no more . Wally
Haha. Couldn’t agree more. Conpkete cowboy. More callbacks than a telephone salesman.
Loooooooool . Brilliant drips mate !
No bleed from the flashing plus why you putting the flashing on before you even have your area down
Felt dripp???
Upstand and why you doing the upstand before the deck ???
i met a lot of trades like that. They definitely know what they are doing, because they done it for at least 20 years - wrong way
12 years and you don't know the difference between a skirting and drips...oh dear Gary oohh dear.
Gary,you should always do the outlet first my friend.!!!
Should it be flashed into the wall?
you didn't show the most important thing, which is "How long do you apply heat to the felt for" It's obvious you lay it green side up, and press the adhesive to ensure contact, but overheating causes the felt to disintegrate.
Could you show all three layers from the first nailed layer to what the second layer and final capping sheet? Thanks
Have you done it yet
?
Keep a modbit trowel hot and use it to do the edges. Cheers anyways from Canada.
talk about leaving yourself open to attack.Been felt roofing 32 years,and this is not the way to do it!..Why show people how to mess around with a highly skilled trade,with a incredibly dangerous in the wrong hands gas gun as it is!
I been doin it less than a year and I can do better than that😂
Drips first ? 😂 ..lunatic ...3year old video .. ceiling surely has fell in top of some old dear by now 😅
Thanks Gary!
Right out of the gate he's fucked. The wrapper that surrounds the roll is still stuck to it. Its not meant to be burned in with the product. It's supposed to be removed.
No the torch melts that in Uk , you can’t peel that off like other country’s
Need felting gloves and to stop tearing be quicker at applying that felt, or will not be fully bonded, sbs tar sets off soon as the flame leaves it
Did you leave on a horse when you finished
That's an upstand mate
Its flashings that go up walls , drips go on the gutter edge and rain checks cover angle fillets over the edge , numpty
ive been felting for 30 yrs mate and looking at u torching you aint got a clue, u wouldnt last a week at our firm, leave it 2 the felters who know how 2 lay felt
Thank You :)
Sorry mate, those are flashings not drips, drips go around the external edges 😂
It's not a flashing either mate
I think this guy has been shown a different way, I personally wouldn’t do it this way. Also been qualified doesn’t make you an expert.
What’s the black paint on the wall
I reckon a light breeze would pull that flashing up
Never been a felter
At least he had a go, you're supposed to get a bead of bitumen out of the flashing not 'thumb it down'
You use soprema mate?
no its not a felt drip its a skirting and do the wrinkles come as standard still i suppose not bad for a learner
and if it creases, just keep banging it down no one will see it...
me, i'd have heated the crease and made it so you couldn't see it...but hey..!!
OMG this man know nothing about flat roofing.
If you wish to be a cowboy,then.this man is a COWBOY
they're flashings not drips chippings not stones 12 years?
why does it say felt when it is polyester ! he does not even burn the white tape off .
hay davey w..your bang on pal. i put 500 squ meters of derbigum on a car showroom in nelson over 40 years ago and its still standing...Torch on muppets...Not a fuckin clue.
YEEEE-HAAAA BUILDERS
Why do these people make videos about thing's they simply don't have a clue about, its a Mockery to proper tradesmen.
He didn't chase the wall out that roof will leak.
everything falls to the outlet standard stuff.
End of the road guarantee off this lad i bet
what a waste of good felt,its a flashing not a drip and you are to get a nice bleed of bitumen out of every joint, all you have done is heat it up and pat it down WRONG WRONG WRONG STICK TO CHANGING A FEW BROKEN TILES .
darren harlow not to mention the fact that the outlet and rest of the flat isn’t done but he’s putting up stands on
@@maxduke8984 hes not showing how to felt an entire roof you moron, only the drip/flashing whatever you insist on calling it! Youre so clever put a vid up.
No arris rail felt upstands at 90 degrees no no
Them drips are up-stands mate, and them stones are slate chippings.
@@THECAT077 agree, and these Muppets normally paint the underlay silver to save on the mineral cap sheet,
Show this to Bauder or Iko they would ptsl,
So many cowboys out there.
That is a felt upstand not a drip you drip 🙈
Wots he talking about drips we call them flashings drips are totally diffrent
Its an upstand
Oh dear who's we? We definitely don't call them flashings mate
@@markwilliams7152 this is boring you can call it witever u like pal
hes no flat roofer.he says hes going to put felt drips on the edges...on the particular roof they are upstands not drips.welted drips are what goes along the front where the gutter is.the clue is in the name a drip is called a drip because its where water drips into the gutter of said welted drip.
ive layed all the top spec felts incl bauder,derbigum felts all over the north of england/scotland and i wouldnt give this guy 1 out of 10 and im being serious.
david watt and if you put enough heat on your felt you get a bead of bitumin along the seam so you know its stuck.only good thing i see is the quality of felt(icopal,techno torch with grooves) pity he dont know how to lay the bloody stuff eh.
@@THECAT077 I’m looking to apply a 3 layer felt, could you offer any advice & suggestions?
felt drip realy haha 2 by 1 and a paint scraper wtf cowboy roofer
The grey stones on top.. torching it makes it wet 😭😭😭
No bleed ? No roller
What a knob drips 😂and don’t bother sticking it
Sacked in the morning
I always do my flashing before the final capping layer aswell, common sense right...
Yes your correct mate
WORST FELTER EVER STICK TO DOG BOXES
Obviously
how is that a drip
Fai play he will get there in the end
Love how qualified roofers are typing in "how to torch on felt" and then tell everyone how wrong the techniques are. Who are the losers? In fact, i see this with all the trades on youtube, someone always knows a better way.
i know what you mean about you tube comments but seriously mate the guy really is doing it wrong,very wrong.he is calling the upstand a drip.he is not putting enough heat on his felt either.hes no felt roofer.a drip is called a drip because it goes above the gutter and its where the water drips of the roof into the gutter hence it being called a drip.the flashing he is trying to lay/fix is called an upstand and again the clue is in the name.
The only drip here is the guy pretending to be a roofer🤣
Gary the pirate
So many things wrong with this Gary really bad my mum could do better
Thats a flashing and its not the wAy you install it ! Never heard of a roller !!!!
There are that many experts on here all arguing how it should be done. Think I'll use onduline!
Blimey.
I have no clue why you guys keep calling it felt. It's not. Felt is tar paper uses for BUR types of roofing and in shingling. Torch on is an SBS product which stands for styrene butadiene or bitumen styrene the main component is a fiberglass mat that the sbs is applied over. There's no 'felt' anywhere in this product.
Your starting backwards mate
ummmm , at least its decent felt ,shame the roofer lets it down ! anyone that watches this ,its certainly not the right way to felt,not even as an example !
its not a drip its a flashing
Nice and pretty!?!?! You must be on a wind up!
was machst du
That is not a drip, it’s a wall flashing
glad garys not doing my roof
very bad
Your no felter m8
lol true right he aint and any time served felt roofer had him sussed in seconds.
Shit that is bad. Are you going to fit another 4mm capping felt drip .lol, over the rolled cap sheet. Sould be venting layer, underlay, drips, cap sheet and last of all flashings ya muppet.
Agency workers. 🤦♂️
Watching that reminds me I need a shit
Guerito eso esta mal px q para eso ne sesitas una cuchara y ese pinche palo para q
This guy doesn't know what he's doing
and pretty?
its seriously wrong!!!
And it's a flashing lol
flashing not drip, also you did,nt cut corner on lap..invest in a seam roller as well instead of your thumb ,,load of rubbish mate
wheres ya beed and thats an upstand not a drip you mug, and im only an apprentice
It would be nice if we saw what he was doing rather than his face all the time!
Another bogger