How to Install a RocketBunny V3 Kit
Vložit
- čas přidán 29. 07. 2024
- This week we are installing A Rocket Bunny V3 Kit on an frs. Here's what to look out for as well as tips when installing.
Also Buy stuff on Amazon: amzn.to/2KNazSI
---------------------------------------------------------------------------------------------------------
As always, if you enjoyed this video and found it in any way helpful, please hit that LIKE button. If you know anyone else who may benefit from this video, because their doing a similar project, then don't forget to SHARE this video everywhere. And if you haven't already, SUBSCRIBE.
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
For updates on new projects Follow me on INSTAGRAM
@INITIALIZED_FRS
--------------------------------------------------------------------------------------------------------
Music:
ChillHop Music:
/ chillhop. .
NCS:
/ nocopyrightsounds
Artists:
GYVUS
GlobulDub
Kozah
Raven & Kreyn - Auta a dopravní prostředky
I swear this guy just has a way with the 86 platform
I agree, talented individual
I love how your videos are more detailed and has more information than all the other videos ive seen about the rocket bunny install on brz.
this channel is about to blowwwww up! keep up the good work
.....😔
dude why haven't you opened up a shop yet ...your the best!!!!! btw thanks for going into full detail with everything way better than any other videos out here
Your attention to detail is top notch great work 👌🏼👌🏼 thanks for doing a video like this too
Still wondering why you don't have 20xs the subscribers & views. Thanks for always posting quality videos!!
Damn, wish I had you install my kit! Looks great!
Awesome video dude! You're just a bit quiet, but other than that...perfect!
Thank to this video I installed my pandem 3v kit on my brz on my garage.
How much did you charge for installation
Very nice job! That looked amazing 😊
Damn this looks awesome!!
Nicely done bro
Awesome video!!!
Good stuff bro
Where did you get the sparco plate's holder ?
I haven’t seen you putting any lining under the wheel hood to prevent that cut out area get exposed to debris and water
Don’t you have to use a rivet gun first to hold the fenders or can you use the screws that come in with the kit ?
going to try and retrofit this kit on my Z34
what were the size of the rims and the size of the spacers????
What was the wheel spacer size?
Nice job guys
Very beautiful
That's a lot of sparks near the fuel cap. 😍💥
can u color match with any paint?
awesome video, great work So the screws come with the kit and how do they attach are they just self taping screws
Self tapping screws are included with the authentic kits.
Great vid, but maybe you should put protective covering above the working area to protect the pain about the kit panels that will still be visible. I like to use either soaked linens or a straight up tarping material. The welding burns look pretty long there @ 9:29.
The welding residue wipes off the car.
I'm guessing you MIG'd it then.
What is the wheel spacer size sir?
So correct me if I'm wrong because I'm getting my Rocket Bunny Pandem V3 kit in a couple days. Running a -60 total offset in the rear and a -10 offset in the front? I thought it called for a -40 front and -50 rear. I had planned on buying -15 offset 18x9 wheels with a 25mm spacer in the front and a 30mm spacer in rear. I'm probably not understanding the offset math tbh, so any clarification you could offer would be a huge help before I purchase my wheels.
I'm trying to buy wheels for my kit I just bought as well. What did you end up going with?
HAve you installed the rallybacker kit on any 86/brz/frs?
Not yet.
Wait would my option lab R716's work with soacers? They are a 9.5 +35 rim with 255 firehawks
You'll need to measure the distance from the edge of the wheel to the hub, and compare that to the the body panel to hub measurement.
Hei , where i can buy rubber seal around the edges? Can you drop a link or something?
The over fender Rubber lining comes included with authentic kits, didn't have to buy separate. But oems like Honda and Toyota sell "Rubber Lining," as well as amazon or ebay.
Does somebody know where to buy one Rocket Bunny v3 kit for a BRZ in Los Ángeles??? (Exactly like the one here)
9 Vanderbilt
Irvine, CA 92618
so Jonny with the kit and installation plus wheels and tires. How much would one have to have to get all this done?
For Installation and paint, around 1500. You would need to source wheels and tires.
Where are you based?
What wheels are those
would it be bad to have a square setup with the 285 tires on the front and back? Or would it just look dumb
As long as you have nice fitment. Spacers might be needed.
Great video man! I was wondering how much a job like this would cost? Would love to do this to my BRZ.
Hit me up through dm @initialized_frs
i have a question, can u install the v3 rocket bunny front just the fornt bumper with v1 front and rear fenders???
You can but It wont look right as the v3 bumper is way wider than the v1 front fenders
Thank you for this vid! Not many v3 install guides. Been waiting for my kit for about 2 months now, how long did yours take to arrive? Also, did hardware come with the kit?
The owner of the car waited 5 months to get this kit in, if you order a legit RBV3 kit it should always come with the hardware and rubber lining.
Awesome thanks for the reply! Yeah I ordered directly from pandem and they quoted me 6-10 weeks but it looks like thats not happening haha. Sucks because all my other parts for widebody have come in and I'm just waiting for the kit now.
Could I install the v3 front bumper without the fender flares or should I just buy it when I can afford it ?
The original mounting is chopped off when clearance is cut for the kit. The side clips and bolts now rely on the front arches to hold the bumper. I would personally wait.
More video pls❤️
Wheels 18x10,5???
what emblem is that on your hood
This isn't my car, no idea actually.
What’s the website you bought the kit from? You said on here it was a perfect fit, I wanna buy a kit and have no problems
Here's their website: shopgreddy-com.myshopify.com/products/17010270
Are you cutting the original body to fit the new kit ?
Yes, This is the case with every widebody, otherwise, the wheel could not make use of the added clearance provided by the over fender.
.Where are you guys located?
where did you get the rubber lining?
It comes with the kit.
Where do you get 75mm spacers?
wheeladapter.com can make you any size spacer.
Can I install the font bumper only some how?
U can’t it won’t fit the stock fenders
whats the difference between the rocket bunny v3.0 and the v3.5 for the frs
From what i've noticed, pre-drilled holes.
@@JonnyBarajas I found out, only the canards are different
What are the dimensions of what you cut out?
Between 1-.5 inches from the edge of the Over fender placement determined after an initial test fit.
I know this video is 1 year old... but if I were to have someone else install my body kit, where and how should I search for auto shops that does that?
I would ask other Rocketbunny owners where they installed their kit. Any body shop will have the skill to install a kit, but a trusted installer will make sure it fits right.
@@JonnyBarajas yea I want a trustworthy person to install the kit, I dont want them to accidentally cut the fenders too long or something... I wish I could drive all the to AZ and ask you for help 😂😂😂
Where was that kit bought from?
shopgreddy-com.myshopify.com/products/17010270
Respect to people who wide-body their FRS/BRZ ... but I think I love the stock body lines to much.
Yeah I got a brz. Never would I wide body. I like the clean stanced look
after a while, you want the body kit
How much do you charge to widebody?
Hit me up on instagram @initialized_frs
@13:18 what's the part called for widening the track width? Noob here...
Spacers
@@JonnyBarajas Thanks!
Where did u get this kit from
They bought the kit from GReddy's official website.
Where do you buy these kits ?
Directly from Greddy and Pandem. shopgreddy-com.myshopify.com/products/17010270
Where did you buy the kit??
I only installed the kit. Not mine. Here is the legit shop: shopgreddy-com.myshopify.com/products/17010270
Jonny The Car Doctor legit shop is actually Pandemusa.com
hey johnnyB this is CZcams
can you link where you purchased it from?
From Greddy's website
@@JonnyBarajas tysm
Where are you located?
Should I got the v2 or v3
Personally I like the V1, flares, v2 ducktail wing, but the v3 is def a better looking kit to the v2. But if you aren't bagged on a v3, you won't have nice fitment guaranteed.
Great video loved it! but the music was way too loud compared to your talking.
Not really.
Can you drive in the rain and snow with that?
The Body kit?
@@JonnyBarajas Yes because you cut it did you seal it with something?
@@benicetotommy7088 Yes, if you watch the multiple body kits I install, they are sealed with glaze and then painted over to seal with 2 layers. Others might not do the same.
Good luck driving in snow with any body kit
18:13 what is the name ? Do you have the link? Thanks
think it came with the kit. other wise, they are weather strips
Thanks bro
How much do they go for?
They have exact pricing on their site. 3-7k
Watching this video as if I have $10k for kit, wheel, air suspension, and paint.
More than that if you want air suspension and paint 💀 the kit itself 4K paint is 3k good airlift is 3k and a nice wheel setup 2-4K
Sameeee, I don’t even own the car yet 🤦🏻♂️🤦🏻♂️🤦🏻♂️
@@luilui785 same, but planning to buy a frs soon
well atleast you have the car... i dont even have money for that xD
I got quoted 13k after tax for bags and a rocket bunny v2 unpainted. So with good wheels/paint and other shit like headlights, ur looking at 20k minimum to fully build an frs, and that doesnt include price of the car lmao
I really wish I could afford the kit incl. installation, because I would never ever cut and drill my car. :D
You can buy the kit for a lot cheaper if you buy it off fly 1 Motorsports website, I think for like 2250.
You should put your brother John in a video
Try karma bodykit bro🤘made in indonesia
If someone want's it installed on their brz, i'll do it, but not buying one for myself.
I was gonna get it but I didn’t want those stickers on it I thought I came with the words
I love these rocket bunny liberty walk kits butthese new ones are a bit meh
i think i preffer the V2 body kit is better and cutter idk
75mm !!!!!!!????
Nice car👌 you must be broke😂
Not my car, just installed the kit for a customer.
Around how much does it cost for someone to install it for you?
I install these for 600-800.
@@JonnyBarajas are you still installing these ?
Shoulda put it on air first
I only installed the kit. Not my car.
What’s your Instagram?? So I can hit u up when I get mines next month
In the description and outro of every video bro. @initialized_frs
Man didn't even use tape just straight in
I don't really understand kits like this on generally slow cars? If you're spending 15-20k on making an FRS meaner why wouldn't you just get a meaner car stock? I do like that color on the kit, though.
Aesthetics are purely subjective. A RWD 200hp from the 80's and 90's were titled as "supercars" now they are considered "slow", again subjective. Plus any car can be modified to to dominate, especially in motorsport, This is done all the time. Opinions on preferences and choices will always be present, that's why we choose to do what we like and think looks cool. Sometimes it's more cost effective than the above mentioned option, or they don't want a stock car. Yes, I just happened to have some time.
If you ever play forza then you will know why
this is playcar and isn't dragcar.
late reply lmaooo but kits run from 3-15k so u can spend only 4 grand for the kit and its to make ur car be ur own lol and look sick
Damn that colour is way off, did you just get the code off the car and paint with what you got? Because damn. The guy should of paid extra to have close panels blended...
This is an example of low budget ricing. Spacers are a cheap, bad idea: the geometry of the spindle is now changed and will put strain on the bearings, they will burn out frequently, or worse, snap.
Glazing over raw metal is another bad idea, eventually in a few seasons the glaze will separate from the metal and rust will happen.
This is fine if you want a BS "performance" look and don't plan to keep the car long, but avoid buying one of these down the road.
Stop. Get some help.
Wow... Everybody thinking this is good work. 😂😂😂
V3 is boring af, I'd wait for Rocket Bunny SVJ
iHeart GT86 {KatyCat} you joking ? V3 looks amazing..
Horrible paint honestly not a good quality job and headlights looks like neons on street