FINAL ASSEMBLY BEFORE INSTALLATION of my 3.8L M96! Project Beef, Ep 10
Vložit
- čas přidán 4. 04. 2024
- Thank you so much for watching FunAhead TV!
Let's do some step by step installation and timing of the cylinder heads for my freshly rebuilt Porsche engine... Project Beef!! AND re-install all the auxiliary parts of the engine as well to get this thing READY TO INSTALL INTO THE CAR!! This engine has been fully rebuilt in the past episodes of Project Beef. It features beefed up internals, and 3.4L to 3.8L conversion Nikasil "Nickies" cylinders from LN engineering.
FunAhead TV merch is now available over at funaheadtv.com/ ... thank you so much for supporting the channel!!!
For business inquiries, please contact David at funaheadtvofficial@gmail.com
Also, follow FunAhead TV on Instagram! funahead_tv...
Disclaimer: Videos are for entertainment purposes only. Any advice, instruction, or information given in this video is to be taken and applied at your own risk. Always do your own research before working on your own vehicle. - Auta a dopravní prostředky
Cool to learn how these motors come together. Nice build!
Thanks!! Thank you for watching
I just did the guides and chains on my 986, almost ready to put the motor back in, unfortunately I have a broken exhaust bolt that I am still working on. Nice work, super jealous on the build!
Good luck with the broken exhaust bolt! Your car will be sweet once it’s all back together!
Stomski racing has a drill out kit.
Great stuff as usual!
Thanks Erwin! I appreciate you!!
Outstanding, keep you the videos; however, please try to work in the camel, XS, smoking jacket.
😂 Stay tuned because in the next Project Beef video the Teeny Tiny Sport Coat makes a strong appearance.
Nice one! Very thorough again! Would your NC buddy offer his services out?
What kind of work are you looking to get done?
Outstanding series, David! A couple of questions...did you consider going with the Ultimate AOS? Did you consider the LN spin on filter set-up? How did you arrive at the choices you made on these items?
I had the same coolant drip from that small cover and slightly tightening it seems to have done the trick. But I wonder if a guy could just R&R it with some RTV? If that cover is removed do you loose a lot of coolant? You use the 75w90, but when I called Red Line, they recommend the 75w90 NS for my car. I have the Aisin 6sp, where I believe you have a ZF. Not sure what "NS" stands for (no slip?), but it must be different somehow. Really enjoying these videos!
Thank you, Tom! Much appreciated. I hadn't really considered the Ultimate AOS.. Maybe someday, but up until this point, I haven't had any issues with the stock one on track... no oil burn in intake, excessive crankcase pressures, etc.. And as far as the LN spin on, I don't mind changing out the stock cartridge filter, so no I didn't consider that one.
It's very possible some RTV could keep it at bay. I have the gasket now though, so I'll swap it out soon enough. Yes, that cover holds back a LOT of coolant, so it's going to be messy.
That's good Red Line is looking out for your specific car! Mine is the Getrag G96.xx something.. I believe the normal 75W-90 is OK to run in mine. You're correct, NS is no slip, so if that's specified, then the synchros in your transmission are more sensitive to slip additives.
Thanks for the video. I’m just at this step on my M96 rebuild. What source did you use for your procedure? Is this your first M96 rebuild?
The Porsche manual. Nope, very much not my first M96 rebuild. Why do you ask?
@@FunAhead_TV_Official Thanks for the reply. I’ve come across a few different procedures and they all seem to differ slightly. I appreciated some of the finer points that you went over when explaining the process.
Thanks for watching along! There are for sure some differing procedures out there centered around timing. Is that more-so what you were referring to?
@@FunAhead_TV_Official Yes, the slightly different procedures when it comes to timing the camshafts. Looking forward to your next video. All the best.
For sure. I’ve heard all sorts of different things. At the end of the day, 1: You need to remove chain slack / play, and 2: you need to be at OT to lock in the crank / cams. The procedure I outlined is tried and true. Let me know if you end up wanting to know any specifics / details on anything I did. You can always feel free to shoot me an email too if that’s easier. funaheadtvofficial@gmail.com
Just a question about your timing tool kit you have. Can you tell me where I can purchase one.
I got my timing kit on Amazon. It’s the Chinese knock off, which people have had mixed results with. That being said, I’ve used it many times on multiple engines and had zero issues with it.
🐂🐂🐂 Project BEEF
BEEEEF!
Is your 996 meridian?
It is! “Meridian Silver” is the color, I believe.
@@FunAhead_TV_Official my 2001 also!