My mom had been gifted this exact machine 17 years ago to make decor for my nursery and we lost the manual and i really didn't want to replace it just so i could sew. Thank you so much for making this video it was a big help.
Thanks! I've had my machine for a while and seem to forget how to use it in between times. I didn't know how to use the higher stitch numbers, and didn't know it was a self-threader; so you have helped a lot. :) 👍🌷
Thank you so much! My fancy machine is in the shop for repairs right now. The Brother is my backup machine so rarely use it and I could not for the life of me remember what is what.
I always knock my tension out of whack and pretty much stopped mending things. I decided to find a video to help me fix it. After viewing this video, I made adjustments and WOW!! I must bookmark this because I will view this video many many times, I'm sure. I agree with sgkaren bear... it is the perfect video that I needed.
This video was exactly what I was looking for-I was starting to get intimidated by all the knobs and buttons, thank you for explaining what everything does!
Thank you so much for sharing this video! I just found one of these at a thrift shop and I can't wait to start sewing with it! I look forward to watching more of your videos on this machine!
Nicely explain and saw each function. Brother RS 36 model:-// have +_- turn with screw driver at the back. The threader, on mine jammed not coming down. Thread cutter on closing flap. And to do design nob on the right side. Next motor wheel.
Thank you so incredibly much for the tutorial. It's been ages since I've been on a machine, but my kid was needing her school uniform pants turned into shorts. You are a lifesaver.
Thank you! I replaced my 40+ year old Singer (finally died) with this machine and hated it because the user manual is terrible. I couldn't figure o ut what the heck I was doing with the settings. This was so helpful, and I no longer despise this machine. LOL
I’m unsure about how to do this with a Brother machine. With the Kenmore the pressure foot tension is inside the door that holds the light bulb. Try that.
Hey, ive watched many of your videos and so far everything went good until at the final part where i start sewing it looks good at the front but when i turn it around, the first thread is bunched up and tangled at the bottom, which i have no idea how or why it keeps happening, i really need help and i hope you can have the time of day to reply, thank you❤.
Hello. Turn the grey stitch length dial from SS to 3. Then turn the stitch selector… the white dial in front… to 2. This is to get out of the stretch stitch function to normal straight stitch.
Very nice. You are the only one out of 5 others who actually told what each dial is for. Thank you!
Glad it was helpful! You’re welcome!
I just bought one of these second hand with no manual - this video is so helpful thank you so much x
You’re so welcome 😉!
I’ve had mine for over 3 years I bought second hand as well. I have no clue as to what to do so I agree. She’s an answered prayer ❤
THis is the most instructive, detail tutorial in using this machine after 10 years. Thanks so much!
You’re welcome ☺️
Thank you queen! I’ve never seen anything more helpful and clearly explained
You're so welcome!
The perfect video that I needed!! Thank you! I lost the manual a while back so this is so useful!
Glad it helped! You're welcome!
My mom had been gifted this exact machine 17 years ago to make decor for my nursery and we lost the manual and i really didn't want to replace it just so i could sew. Thank you so much for making this video it was a big help.
THANK you so much. Finally a video that really teaches how to use my new machine. Extra credit for explaining the dials.
This was very basic and thorough! I love it. I just subscribed and I’m ready to learn how to sew with your help!
You’re welcome!
Muy machine Is no work the siz zag
@berthadeleon5774 what is wrong? You may write in the language you speak.
I dont speak englis sorry 2:18
@@berthadeleon5774 Hablo espanol?
I have had this machine for about ten years and didn't know it had a thread cutter and some other features. LoL. Thank you for this!
You’re welcome
Very well explained, thank you!! I normally have to skip around because they aren't talking fast enough but you did a great job being concise
You’re welcome and thanks so much for your comments!
I just got my machine and this is really insightful, thank you.
You’re welcome!
you are amazing .. your video helped me to work with xl3600 sewing machine tooo
You’re welcome!
Thanks! I've had my machine for a while and seem to forget how to use it in between times. I didn't know how to use the higher stitch numbers, and didn't know it was a self-threader; so you have helped a lot. :) 👍🌷
You’re welcome!!
God bless you! I appreciate you for taking the time out to explain this to us.
Thumbs up ❤️❤️❤️❤️
Thank u! I read the manual but I didn´t understand a lot of things. Super useful video!
I haven’t used my brother sewing machine in a few years and this video just got me reacquainted t
With it. Thank you so much, perfect video 🤌
You are so welcome!
Using a friends machine and this whole series is amazing! thank you so much!
You’re welcome. Glad I could assist!
Thank you so much! My fancy machine is in the shop for repairs right now. The Brother is my backup machine so rarely use it and I could not for the life of me remember what is what.
You’re welcome
Thank you so much for spending lots of time to Make the video. Your’s step to step demonstration is very clear and helpful. 👍👍👍
You're very welcome!
Thank you for such a thorough run down! I got this machine over a decade ago and can't find the manual anywhere. I learned so much from this video.
You're very welcome!
Perfect and clear explanation of the settings. Subscribed so I can watch your other videos!!!
Thanks so much!
I've had my machine since 2016 and didn't know about the lever that pulls down for sewing buttons. Thank you for this tutorial!
You’re welcome 😉
This was very helpful. Thank you.
You're welcome!
Thank you for this video. You made it so easy to follow. Thank you again.
Yaaas! Brilliant! I learned so much in a short time. Thank you! Thumbs up to you dear lady.
You’re welcome 😇!
I have been looking for tutorials to help me understand my machine for quite a while & this video really set the lightbulb off!! Thank you!!
Yay!!! Thanks so much for your comments! 😍
I always knock my tension out of whack and pretty much stopped mending things. I decided to find a video to help me fix it. After viewing this video, I made adjustments and WOW!! I must bookmark this because I will view this video many many times, I'm sure. I agree with sgkaren bear... it is the perfect video that I needed.
So glad I could assist! Thanks!
This video was exactly what I was looking for-I was starting to get intimidated by all the knobs and buttons, thank you for explaining what everything does!
You're very welcome!
Thank you so much, this video really helped me to get started!
You’re welcome
Thanks for helping us to understand the operation of our machine. It will be much more useful now that we know how to operate it correctly.
You’re welcome!
Thank you!!! This video was great and very informative
You’re welcome!
Thank you! I subscribed (beginner here!).
You’re welcome! There are lots of resources for you!
Good job introducing this machine. You explained things on it I didn't know, So thank you,
You’re welcome 😉
I using this type machine bm2600 very helpful and innovative .. thanks
You are welcome
Thank you so much for sharing this video! I just found one of these at a thrift shop and I can't wait to start sewing with it! I look forward to watching more of your videos on this machine!
You’re welcome 😉
This explained it so much easier than the brother tutorial...thank yooouu!
Wow! Thanks so much!!
THANK YOU this was so helpful! Very straightforward. Much appreciated!
You’re welcome!
Thank you for explaining the buttons!!!
You’re welcome!
Just found your video! Thank you so much. I finally understand...lol.
You’re welcome!😍
Thank you for the video it saved my life!
Yay. You’re welcome ☺️
this was the most amazing tutorial, thank you so so much xx
You're so welcome!
Wonderfully explained! Thank you!
You're very welcome!
Thank you! Exactly what I was looking for!
You are welcome!
Excellent. Thank you
You are welcome!
Thank you so much for this video! I couldn't figure out what I was doing wrong with the tension setting! Really appreciate this video!
You’re welcome thanks for watching!
This was SO helpful. Thank you!
You’re welcome ☺️!
thank you so much for creating a video I could understand! This completely solved my issue and I appreciate you so much!! 🥰
You're so welcome!
Excellent! I am looking forward to the next video :)
Thanks much!
Thank you for sharing. I appreciate you.🙏🏽
You’re welcome!
Nicely explain and saw each function. Brother RS 36 model:-// have +_- turn with screw driver at the back. The threader, on mine jammed not coming down. Thread cutter on closing flap. And to do design nob on the right side. Next motor wheel.
Very helpful and informational as well! Subscribed to your channel and ready to get started sewing!!!! :) Thank you!!!!!!!!!!!!!!!!!!!!!
Thank you for explaining
You’re welcome
Thank you so incredibly much for the tutorial. It's been ages since I've been on a machine, but my kid was needing her school uniform pants turned into shorts. You are a lifesaver.
You’re welcome! 🙃
Thank You😊
You’re welcome!
Thanks this was very informative
That was so helpful!
You’re welcome
thank you so much!
You’re welcome!!
Best video
Thanks so much! You’re welcome!
Great video. Thanks!
You’re welcome!
Thank you! I replaced my 40+ year old Singer (finally died) with this machine and hated it because the user manual is terrible. I couldn't figure o ut what the heck I was doing with the settings. This was so helpful, and I no longer despise this machine. LOL
You’re welcome ☺️
I love you thank you so much ❤
You’re welcome ❤️
Great video thank you
nice, helpful, thanks!!
How do you adjust the pressure foot tension? Everything I can find talks about a screw that this model just doesn't have
I’m unsure about how to do this with a Brother machine. With the Kenmore the pressure foot tension is inside the door that holds the light bulb. Try that.
Hey, ive watched many of your videos and so far everything went good until at the final part where i start sewing it looks good at the front but when i turn it around, the first thread is bunched up and tangled at the bottom, which i have no idea how or why it keeps happening, i really need help and i hope you can have the time of day to reply, thank you❤.
Rethread the machine top and bottom. It sounds like the bobbin may not be attached. Make sure it clicks in the silver attachment piece.
Sir please explain demo and sewing tricks and use of embroidery designs given in Brother BM 3600 machine
You are asking for the Brother xL2600? Or the 3600?
@@whatsshecreating for brother machine BM 3600
Thank you for this video (I know it’s a few months old). I’ve found one of these for $30 on marketplace and was wondering if it’s worth it. 🤷🏼♀️
You bought a good one! Thanks 😊
hi! are you able to adjust the speed on this machine?
Unfortunately no, not with this machine!
@@whatsshecreating oh ok thank you! I used mine for the first time today and it caught me soo off guard 😂
I need help with making button holes
I will put this on my list of video ideas. I do not have a video created for this yet.Thanks.
Yo estoy custurando kon la makina pero no me agara para nada la illera pk ...es 2600i
What does the word La illera mean? It doesn’t translate into any word.
How do I get it out of special stitch
Hello. Turn the grey stitch length dial from SS to 3. Then turn the stitch selector… the white dial in front… to 2. This is to get out of the stretch stitch function to normal straight stitch.
Is this a good option to buy?
Yes, this is a good machine for general sewing!
Can you use this machine for buttone hole
Yes, this machine does a buttonhole stitch. It is actually the number 1 stitch on the stitch selector dial. It has the rectangle under it.
Haindi me
Yes, thank you for your suggestions. It is in the making.