Game Changer! Full Suspension Overhaul on My Saab 900!
Vložit
- čas přidán 25. 07. 2024
- Get your "BUILD IT BETTER" 900 merchandise here:
my-store-3c68d2.creator-sprin...
my-store-3c68d2.creator-sprin...
Visit my Patreon here: / autoautopsy
Merchandise/Website: autoautopsyyt.com/index.php
Instagram: @Auto.Autopsy
Email: AutoAutopsyYT@gmail.com
Outro song: • BVRNOUT - Take It Easy... - Auta a dopravní prostředky
Thank you for even one more awesome video, my friend.... ;)
I also recomend you to replace the sway bar bushinds that hold the sway bar to the body frames.
Want to see your smile as you hit the hairpins on your favorite drive. . . Springtime in AZ
Thank you for a nice video. Keep the good work (and the 900) going :)
Thank you!!
Great video and spanner work 👍🏼
Thanks 👍
@@AutoAutopsy That Milwaukee impact wrench is great!
Great vid!
thanks!
Nice job!
thanks!
Cool that you're making these videos available as a resource--great job! How is the parts availibility for these cars?
Thanks! 900’s can be a little tough. Most stuff I’d still available, but you need to rely on a few different sources. For GM Saabs, this video is helpful: czcams.com/video/ARVbmaQ7Dn8/video.htmlsi=9arDRYBFHD_-dGHv
I'm seriously thinking about installing Bilstein shock absorbers on my CR-V. Not sure if I'll go with B4s or B6s yet but I'm definitely leaning towards one of those 2 options.
nice! I guess it ultimately depends on how comfortable of a ride you want
B6 is more like for sporty driving with a stiffer suspension.
B4 is more like for more softer daily drive use.
I did also go for the B4 on my og900 convertible cruicer....
I fixed my in front, will fix the back later but mine is not as nice as yours, its heavily rusted everywhere. I will very likely need to weld some more when i change them in back. Pretty easy in front, used lowering springs with helps with the "wandering"(more safe and easy to get in place too). I did it at the same time as i welded the link arm fastenings that was gone, even the rust had fell off. Have some videos that might help if you get stuck or just ask if you want to do the springs too. They are tricky to get in and dangerous with the widow make...i mean spring compressors.
Thanks! I’ll probably do springs at some point. The rear is still sagging a bit
@@AutoAutopsy Consider lowering it a bit with springs it makes a big difference. But for now you got to enjoy the new shock shock absorbers. I installed those on my old volvo 740 they are excellent. That car is in great shape, as rust free as your Saab and got good paint too.
Keep up the good work!
The blue dampers were from Sachs. They are the standard dampers in the 900. Unfortunately, the B4 dampers tend to rattle very quickly, which is why hardly anyone (at least here in Germany) still installs these dampers. That's why I switched directly to the B6. Otherwise, the Koni dampers could be an alternative for more comfort. I'm curious to see how satisfied you are with the new setup!
They have not started to rattle on my 9000 Aero. I installed them in 2019 on the car. 🙂
thanks for the heads up; I have always heard great things about Bilstein
@@AutoAutopsy in terms of the B6 yes, but not for the B4.
Cool!
thank you steve
i hope you tied those lower shock bushings after you put load on the suspension. Keep up with the good work.
thanks! tied?
@@AutoAutopsy i mean tight 😅
I did a full suspension rebuild on my 1993 saab 900 convertible. I went with Koni reds. and I love it. but I did not lower it. I have 16 inch Areo rims from a saab 9000.
nice! I would LOVE some 16in aeros...
I also just hit the 150k mile mark on my 08 93 what do you recommend for servicing maintenance
serpentine belt and tensioner would be a good idea if that hasn't been done. other than that, it should be good to go besides regular maintenance!
I’ve been asking myself do I change the Springs or the Shocks or Both?
Here in Oz I’m up for big freight costs either way…
I still have a sagging rear end after this. These improvements helped a ton, but my rear springs are on their way out. I’d recommend doing both!
Where did you get the upper control arm tool? Not finding anything like it in preliminary internet search.
I was able to find it used on a Facebook group. eBay would be my recommendation
Looking good, but just thinking about rust (or not) and crud… I forget, was this an AZ or CO car in its previous “life”?
yep! AZ, Washington, and Florida!
Hello I have a question so I installed my cold air intake about a week and a half ago and everything has been going smooth but then when I was driving uphill my vehicle through a
P0171
System too lean, bank 1 is that because of The cold air intake or because I installed everything right
that almost sounds like an O2 sensor code, but I could be wrong. I would recommend searching that code on google/saab forums to see what possible causes could be
Thank you very much for your response! Appreciate it
looking good with the new suspension. my 900 has one strange suspension issiue aswell. maybe someone has a hint on what it could be!
so i have noticed that my rear wheels seem to be out of place, the driver side wheel looks more out of the fender then on the right side. i looked at the dampers and measured how low the car sits (i have never done anything with the suspension). well it seems that the car has red Koni dampers, also the front sits 35cm low, aswell as the back but the driver side wheel sits 34cm low. but i cant imagine that this is the reason. i am kinda worried, that my suspension might gets damaged or that the previous owner did something with the suspension. i also wonder about the panhard rod. if the car sits to low, that it needs to be adjusted, but i dont know if thats true or not
Could be that a previous owner changed the suspension from stock and as a result the panhard rod was misaligned. I’ve changed the suspension and wheel size on my ‘91 SPG and installed an adjustable rear panhard rod to center the rear axle.
@@TheBTG88well what i have seen so far is that the 35cm suspension seems to be the more sportier version. i already tried to find an adjustable panhard rod but the offers here in germany are zero, or are there universal rods that you can buy somewhere? i know that MCS offers an adjustable Rod but thats out of stock at the moment. so do you have any alternatives?
@@kaisertrinityt.m.i.s1607 I bought mine years ago from Saab Sport & Rally in the US, but they are no longer in business. Put your name on the list for the MCS one for when they come back into stock.
have you tried getting an alignment?
@@AutoAutopsyyes i did one, however it was only made for the front wheels. the data for the back wheels were also noted, however i am not an expert, there didnt understand those numbers. i still have them, but dont know if you understand them either, or know if there is something wrong tho
Where did you get the control arm tool?
eBay, I was able to find a used one for sale. They pop up every now then
Heyy, I got a saab 9-3 turbo 4 2011, its got an issue where it only hesitates at full throttle, the car with shutter, and wont accelerate, but half throttle its fine, any ideas? B207R, thanks
it sounds like you've got a misfire which is likely caused by bad plugs or coils. here's a video with more info: czcams.com/video/xJyNJzFX2JI/video.html
純正と比べて車高は変わりましたか？
🏁🏁🏁📽👍
:)
On my list to do’s! Mines all original ! Ugh
you'll love the difference it makes!
My rear end is mega saggy… still on the blue Sachs… i guess id better change them….
Mine is still sagging a bit too :/ I was hoping this would fix it but it’s the springs that’s causing it
Well done! Only thing that remains is learning how to pronounce Bilstein properly.
lol, I have heard it said both ways
@@AutoAutopsy not in Germany, not in Austria, not in Switzerland. Only in America 😉.
Good video, Can we invite you to do a review for our product? We have emailed you to inquire about an opportunity
sure!