A very sincere "Thank-You" to the person who posted this video,my gas guage needle was stuck at 3/4 on a full tank,I went through this process then for a drive,as I drove slowly the needle started moving towards full and sure enough this solved the problem,I cancelled my appointment with the garage--Thanks!
I just got my check engine and ESP lights on earlier today, did this diagnosis and they cleared, didn't check to see if they were still on before I did this though.
Other than that theres my case. It turns out the check engine light should be on,but is disconnected from the circuit, this was the salesmans technique to hide the engine problem. It worked...
thanks for the vid was interesting as i have just got a m6 2003 and have an engine light on and want it gone as is just up for a service but will do myself :) would have been nice with some comments on the sub menus and what they are for and there settings .... was nice to see and learn more about this car thanks for your post appreciate that :)
Hi mr fix it my Mazda 6 2010 dpf light come on when driving I used copper wire trick but know my whole dash has light up and steering is heavy can u help me out
How do I turn off my ac with my window defrost mode? There is a video on CZcams that shows how to disable ac in defogger mode on a civic. I have a 2013 mazda 6. Any such thing for my 6?
Dear friend, I do what you show in the video, but it doesn't work for me!!! I put the speedometer back, but it doesn't respond at all!! I have a 2007 Mazda 6 Premium. What could be the problem that it doesn't respond at all? thanks bro
@@bogdybog91 If you hold the unlock button, it should open all the windows. If you hold the lock button, it should close all the windows... However for some reason, it only works when all the doors are closed - open one and the process stops, even though you can still control the windows with the in car switches, when one or more doors is open! 🤔😯😀🤘
Hello Mr. Fixit my son recently purchased a 2007 Mazda 6 just after he graduated as his first car however I'm having reservations about him driving it until I feel its safe to drive. I noticed that the front dashboard lights began to dim while driving it an then the acceleration of the vehicle began to decrease and a few seconds later every thing went back to normal. I was told to take it to geta diagnostic tests however they told me it would only work if the check engine light is on. What should I do?
My vent selector switch doesn't seem to be working. It just blows out of the dash vents and not defrost or the floor. What could be the problem and is it easy?
You can buy a seat belt beep stopper on Ebay for about $10 shipped. They come in all sorts of colors to match that of your car's interior. All it is is a short adapter that plugs into the buckle. The trick is to make the car think that the belt is actually buckled in to make it stop beeping. You can then buckle your belt into the adapter whenever.
No, this only checks if the instrument cluster works correctly. If the oil pressure sensor malfunction you will have to diagnose it separately. This test only tells you if the oil pressure indicator works as it should.
@@mrfixpl you do realize that it's an active testing function right. So let's say you open the driver door on what ever number it would change from no to yes or on to off. The seat sensor both reading out the weight of passenger telling if the seat is all the way back. Trunk locked or even if the key is in the ignition state on or off. Just can't change anything but does more then what you implied. It tells you battery voltage a bunch of stuff and features unavailable on whatever model just skips that number witch is why it doesn't through all 61ish of the numbers. So it's doesn't tell you oil Because the car doesn't actually have an oil pressure sensor but at least mine doesn't end it's a 2006 which is just a the weird gauge that moves with the RPM in my case.
Does anyone know why my Mazda can't lock all 4 doors using remote? Worked fine two days ago.. now it won't react. Blinkers turn on and off as before, but nothing happens with the lock..
try to reconnect the battery, your saved radio channels gonna be erased.doors have a sensors if they not closed it wont lock the car and it wont blink,your situation is different but try who knows ; )
Sure you can buy a Bluetooth scanner they are very cheap and then you can read the codes from your Android or IOS phone and clear them if you want. Great way to save money when diagnosing your car
Do you know how to fix C1119 - P2033 error codes? I've just visited a service and changed a ton of stuff on the car (mazda 6 - 2007) and they don't know what to do with these codes...
To mame it easy for you. www.obd-codes.com › p2033 P2033 Exhaust Gas Temperature EGT Sensor Circuit High Bank 1 Sensor 2 - OBD Codes And for the C1119 you need to take a look at the aba wiring harness. But before you look at it test the battery and all the plugs and connectors from the engine bay for any corossion... May be even the relay or a fuse corroded, I got a 2007 mazda 6 2.0 Ts and I had the same problem, I have a new battery but I didn't had a good harnest connection, the wiring plug from my abs had not just corroded, it also rusted and I had a week connection. I changed the full harnest and main socket bord and I got rid of all my problems, also in the future be aware about the volant temperature sensor. If your car starts reving up to 3000 and you see the temperature gage go down to 0. Change the sensor and the coolant. They are nice strong cars that like to rev, but they have some issues
How do I find a radio id on a Bose mazda 6 2007 stereo for Sirus radio? I heard its on the back of the radio. But if anyone knows another way than channel 0 let me know...thanks
A very sincere "Thank-You" to the person who posted this video,my gas guage needle was stuck at 3/4 on a full tank,I went through this process then for a drive,as I drove slowly the needle started moving towards full and sure enough this solved the problem,I cancelled my appointment with the garage--Thanks!
I am having indeed the same problem. Did your range meter work when you had this problem?
I just got my check engine and ESP lights on earlier today, did this diagnosis and they cleared, didn't check to see if they were still on before I did this though.
Can you share the Mazda Fuel consumption correction link? please - I have a 2007 mazda6
What's the purpose other then "Hey look what this does" Does it calibrate the gas guage? Does that reset the malfunctioning guage in some way?
Yes very easy. Ok
Other than that theres my case. It turns out the check engine light should be on,but is disconnected from the circuit, this was the salesmans technique to hide the engine problem. It worked...
thanks for the vid was interesting as i have just got a m6 2003 and have an engine light on
and want it gone as is just up for a service but will do myself :) would have been nice with some comments on the sub menus and what they are for and there settings ....
was nice to see and learn more about this car thanks for your post appreciate that :)
what about the AT light
Hi mr fix it my Mazda 6 2010 dpf light come on when driving I used copper wire trick but know my whole dash has light up and steering is heavy can u help me out
How do I turn off my ac with my window defrost mode? There is a video on CZcams that shows how to disable ac in defogger mode on a civic. I have a 2013 mazda 6. Any such thing for my 6?
ขอบคุณมากๆสำหรับความรู้ from thailand
Mr-fix, was the fuel gauge working before you did the test?
What does the fuel constumption correction does?
Dear friend, I do what you show in the video, but it doesn't work for me!!! I put the speedometer back, but it doesn't respond at all!! I have a 2007 Mazda 6 Premium. What could be the problem that it doesn't respond at all? thanks bro
Great... you just forgot a minor detail. What do they mean and how to toggle back and forth. Other than that, great video..
Have you checked the link in video description? mr-fix.info/mazda-6-hidden-menu-test-mode/
mr-fix I just did, and I'm in the exact same spot as I was before...
one of my favorite hidden things about my mazda6 was rolling down the windows with the keyfob. I loved that useless feature! lol
On mine, the front right window is not rolling down/ up with the keyfob. Just the front right isn't working. What would be the problem?
@@bogdybog91 merge din cheie sa deschizi geamurile sau ce?
how do you do it i have a 2007
@@eddygert360 Click the unlock button on the fob twice and hold with the second click. The front windows should roll down after about 2 seconds.
@@bogdybog91 If you hold the unlock button, it should open all the windows.
If you hold the lock button, it should close all the windows...
However for some reason, it only works when all the doors are closed - open one and the process stops, even though you can still control the windows with the in car switches, when one or more doors is open! 🤔😯😀🤘
hi number 8 said off for me what does that mean my oil light is coming on when I come to a stop thanks
My hazard lights work whenever they want too and sometimes also flickers could that be a electrical issue? I have a 2006 Mazda 6
it is electrical issue
Hello Mr. Fixit my son recently purchased a 2007 Mazda 6 just after he graduated as his first car however I'm having reservations about him driving it until I feel its safe to drive. I noticed that the front dashboard lights began to dim while driving it an then the acceleration of the vehicle began to decrease and a few seconds later every thing went back to normal. I was told to take it to geta diagnostic tests however they told me it would only work if the check engine light is on. What should I do?
Battery
Hi mister fix do you also know How to switch the display text from a Mazda 6 when you start up the car the screen says Hello I wanna change it Thy
Go through the audio settings where you would adjust your bass/treble, I believe you can turn on there “ Welcome - ‘ON’ “
how can i change the fuel consumption in l/100km from l/100miles ? thanks
Would have been interesting with some dialogue . For the average motorist ( like me) this video pointless
If find out how to change km to miles please tell me
My vent selector switch doesn't seem to be working. It just blows out of the dash vents and not defrost or the floor. What could be the problem and is it easy?
Hi mate, i can't go more than 51 d15 you know what the problem could be? Or do I have to press something else?
@mr-fix How to change licence plate light for Mazda 6? (2002-2007)
I need assistance with my Mazda 6 2004... I have to disconnect battery to get gas levels... can you help ?
Is there a setting here to turn off the speed warning buzzer that chimes at 120 kph?
+JE PG
I don't think so. It's a market-specific feature (JDM I think) and need to be removed by dealer.
You should never drive at 120. 😉
I did that and now it doesn't show me anything, not even the test mode
Can you tell us how to change miles to km
What is 50 and 51?
what does this out should I be trying to accomplish
+Daniel Garrido This is for diagnostics of the instrument cluster module.
How do adjust settings? Trying to disable the seatbelt chime
+Kevin Lancaster currently don't know how to disable it with software.
mr-fix are you able to adjust anything or is it just a test?
Dont get a ejected from your vehicle.
You can buy a seat belt beep stopper on Ebay for about $10 shipped. They come in all sorts of colors to match that of your car's interior. All it is is a short adapter that plugs into the buckle. The trick is to make the car think that the belt is actually buckled in to make it stop beeping. You can then buckle your belt into the adapter whenever.
Awesome buddie. Thanks for the video.
Interesting! but, I'm not sure I understand -- does this check the oil pressure sending unit? if so what does the panel do or change to? Thank you. .
No, this only checks if the instrument cluster works correctly. If the oil pressure sensor malfunction you will have to diagnose it separately. This test only tells you if the oil pressure indicator works as it should.
@@mrfixpl you do realize that it's an active testing function right. So let's say you open the driver door on what ever number it would change from no to yes or on to off. The seat sensor both reading out the weight of passenger telling if the seat is all the way back. Trunk locked or even if the key is in the ignition state on or off. Just can't change anything but does more then what you implied. It tells you battery voltage a bunch of stuff and features unavailable on whatever model just skips that number witch is why it doesn't through all 61ish of the numbers. So it's doesn't tell you oil Because the car doesn't actually have an oil pressure sensor but at least mine doesn't end it's a 2006 which is just a the weird gauge that moves with the RPM in my case.
Who is that background music?
Does anyone know why my Mazda can't lock all 4 doors using remote? Worked fine two days ago.. now it won't react. Blinkers turn on and off as before, but nothing happens with the lock..
try to reconnect the battery, your saved radio channels gonna be erased.doors have a sensors if they not closed it wont lock the car and it wont blink,your situation is different but try who knows ; )
Hi
Any chance ya know how to reset the oil change service light?
Sure you can buy a Bluetooth scanner they are very cheap and then you can read the codes from your Android or IOS phone and clear them if you want. Great way to save money when diagnosing your car
works on cx7 too
Do you know how to fix C1119 - P2033 error codes? I've just visited a service and changed a ton of stuff on the car (mazda 6 - 2007) and they don't know what to do with these codes...
To mame it easy for you.
www.obd-codes.com › p2033
P2033 Exhaust Gas Temperature EGT Sensor Circuit High Bank 1 Sensor 2 - OBD Codes
And for the C1119 you need to take a look at the aba wiring harness. But before you look at it test the battery and all the plugs and connectors from the engine bay for any corossion... May be even the relay or a fuse corroded, I got a 2007 mazda 6 2.0 Ts and I had the same problem, I have a new battery but I didn't had a good harnest connection, the wiring plug from my abs had not just corroded, it also rusted and I had a week connection. I changed the full harnest and main socket bord and I got rid of all my problems, also in the future be aware about the volant temperature sensor. If your car starts reving up to 3000 and you see the temperature gage go down to 0. Change the sensor and the coolant. They are nice strong cars that like to rev, but they have some issues
How do I turn off the speed warning at 120KMH?
😂
Good job host
👍
Were is four way at on a 2003 Mazda tib
Suv
How do I find a radio id on a Bose mazda 6 2007 stereo for Sirus radio? I heard its on the back of the radio. But if anyone knows another way than channel 0 let me know...thanks
Hi Cheryl search Mazda 6 GTA car kits
GTA car kits Mazda 6 2006 2007 2008 install of iPhone iPad and six adaptors
Aux *
Mazda 5 2006 heat gauge stuck on about medium?
did u find a fix?
What year is this car?
sorry, don't know and have no way to check now. :(
+mr-fix Thanks.
Looks like either 2007 or 2008.
Ty.
what do I look for if something's wrong
Quede igual 🤷♂️
anybody know what to do with the code u0155 I can't find anything
what mazda 6 is this??? mine only has up to 150 mph
For European market. 240km/h is about 150mph.
westcoastmickey a vehicle going 240 mph with a 6 rpm limit
Its kmph clearly written on the meter
Wow your kidding me. Is this for 2007 Maiatas
Don't have access to one. Please try and let me know.
What the hell good was that?
My daddy is car in color gray
waste of time here
Orlando Sanchez youre right
Totally
You're a waste of time
pointless
fake it's not working
Not fake works just fine
Geht garnicht
Voila