I have a 2012 ZX14R Got the one and a quarter inch risers. I could hardly believe that small change made a huge difference in comfort. I lowered the back a couple inches too. Makes it easier to stand both feet now. I love this bike.
Thanks for the vid, I thought I would have to do a lot of other mods if I put them on. Now that I'm 60 my neck kills after an hour in the saddle, these might be the answer. I have a 2012 ZX14R which I love. It's the longest I've had any bike 8 years now. Cheers from Australia.
I got 1 1/4" which is as far as you can go without hitting the fairing or running into cable or hose length problems. I cut the centering lug off, so I could raise the forks in the clamps, as I like the low look. Plus, I have a steering damper on so, I needed different (longer) bolts for that side. I do like how it cruises like this, for sure.
When I first bought mine, I installed these same risers for the same reason with the same results as you found. After about 3 yrs, I installed a set of lowering links and dropped the rear about 1-3/4". I quickly found the risers were no longer needed and took them back off. It was a definitely a pleasant surprise :)
I might get a set. One thing for sure that will get changed out is the oem seat. For me that seat is crazy painful and my 10r seat was way more comfortable. Before I order this corbin seat, I'll see if there is somebody in my area that could do something with what I have now and make it way better. If not, I'll order that corbin and toss this oem seat out.
Looking good man I have a 2018 ZX14R ABS SE and Thinking about A Brock's exhaust how do you like the exhaust you have on your 14? is it a two brothers exhaust?
I have just installed some on my Gen 1 14. I cant get the blanking plates in? I notice yours are on the top & sticking out? If you was to take them back off and place the cap/cover on top of the riser before you put the bars back on it would sit flush inside the bars. Mine is about 1mm too wide so can't get in top or bottom. Did yours drop straight in or did you struggle? Good video.
I have the caps up like that because I liked the way they look, I could push them down flush or father if I wanted to. Oh, they slid straight in, no struggle.
You have one awesome bike love that color combination man it looks good- but my question is why is the BBQ not fired up? time for some of my hot wings and a beer after looking at your bike -
I’m thinking about buying a 2021 Kawasaki ZX 14R for some sports touring , mostly touring clocking up 500 to 700 miles in a day . At 5 foot 7 inch I’m a bit on the short side . Just wondering how tall are you ? I ask you this so that I get an idea if 1inch to 11/4 inch risers will make it comfortable for someone of my height on day long rides . Cheers 🍻 🍻
I'm 5' 7" and have a 2016 zx14 with 1 inch risers. Yes, thay make a big difference. However, when on the highway, trying to tuck in becomes an issue. But when riding within the city they work great
I got them off Amazon. It's been awhile but they are exactly like these >> TARAZON 1" Lift Handlebar Risers Adapter Handle Bar for Kawasaki Ninja ZX14R ZX-14R ZZR1400 2006-2018 www.amazon.com/dp/B07PK29VBS/ref=cm_sw_r_apan_glt_fabc_148B6HQXRRGPTFWBKCCZ
Hay man Just a little update on my 2018 ZX14R getting ready to put some Voodoo exhaust slip-ons and a double bubble wind screen. I will be posting it on my channel #torah57mitch.
I'm considering higher risers than my present 3/4 inch Heli bars on my 14r. I might go higher than your 1 inch risers (1.25inch) Ifyou turn your bars to full left (as to lock the bike) how close are the throttle cables from rubbing under the fairing? J.
@@markurbancowboy I suppose I could bend the master cylinder down a bit. How is the cable clearance to the fairing with your setup at the full left turn position? J
@@jscottc6675 I supppse you might be able to do that, I don't know. I can't answer the cable question as I no longer own the bike, traded it two months ago (but the clearance was good with my set-up). I went back to a HD cruiser just to slow it down some. Lol, was going to get hurt or in to much trouble. 😊
You can fit heli bars. You then would sit upright. I fitted heli risers for an 1and quarter inch rise. A double bubble screen .then lowered the seat. Can sit upright at 160 to 180kmh. The stock position is only comfortable at 250 plus. For a real really fast sports tourer it probably should have almost normal bars and a bigger screen .
At 5'11", would these be a good investment? I ride a ZX-11 at the moment and I'm picking up a ZX-14 tomorrow. On the ZX-11, I definitely need them. Just wondering if, for my height, the ZX-14r will be the same.
I'm 5'10" and they are perfect for me, you don't lean over as much and it is a lot more comfortable. The risers don't cost much and install takes about 15 minutes so you're not out a bunch of money and time if you don't like them.👍
@@markurbancowboy Well, last night I ordered a set and can't wait to install them. I'm riding from Texas to Georgia and figured the extra comfort would be welcome over the long haul.
@@ColonelCampbellAI2024 When you have a passenger, you are supporting their weight, and it's hard on your wrists. So that's why I said I can imagine the risers will feel better on your wrists when you have a passenger on the back, because you're supporting less of their weight because you're sitting more upright.
@@ColonelCampbellAI2024 If you're on a sports bike, I don't care who you are, you're going to have to support that person's weight at some point. Trust me, you'll more tired with a passenger than you would be solo.
Just subscribed to your channel... check me out as well ..... this is a very informative video .... as I'm strong considering a zx14r next as me next bike.... im bouncing between the zx14 & the busa
@@markurbancowboy man thats what I keep hearing!!!! Just so many good things about it ........ im currently on a 1199 Panigale...but need/want another bike for some roll racing but I also want it to be super comfortable....I can only ride my Panigale about 4hrs straight until ill need a break hahaha 😅
@@DudeMungus You'll love the 14R. This has to be the most comfortable sportbike out besides an FJR or a Concours; add some risers on the 14R and it will compete with them on comfort. Also, there's nothing like the brutal acceleration of this thing, it's ungodly!😁
1. There shouldn't be excessive weight on you wrist while riding. Grip the tank with your legs and hold yourself upright. Your arms should be loose. 2. Your brake lever will hit when the handle bars are full tilt. 3. You may want to consider an actual tour. Like a Concur 1400.
Thats what a yamaha fz1 is for. Got one for like 4,000 dollars with so many upgrades just put inch up and inch back handle bar risers on it and a sargent seat. And i could ride it all day
I have a 2012 ZX14R Got the one and a quarter inch risers. I could hardly believe that small change made a huge difference in comfort. I lowered the back a couple inches too. Makes it easier to stand both feet now. I love this bike.
I installed the 1 inch risers on my 2015 ZX14R, and this bike needs taller handlebars... uncomfortable, even with the new risers.
Thanks for the vid, I thought I would have to do a lot of other mods if I put them on. Now that I'm 60 my neck kills after an hour in the saddle, these might be the answer. I have a 2012 ZX14R which I love. It's the longest I've had any bike 8 years now. Cheers from Australia.
Great info. I will definitely pick up a set. Thanks from Canada.
Absolutely they make it more comfortable to ride. I had a 2006 ZX14 for 11 years didn't have them. Now I have them on my 2013 ZX14R so much better
I got 1 1/4" which is as far as you can go without hitting the fairing or running into cable or hose length problems. I cut the centering lug off, so I could raise the forks in the clamps, as I like the low look. Plus, I have a steering damper on so, I needed different (longer) bolts for that side. I do like how it cruises like this, for sure.
Stuck them on my ZZR1400 and it worked wonders while riding slow or through towns and cities.
Yep, they make a big difference. 👍
You are tall guy that’s why. Good luck and be safe. Ciao
I have these on my ZX14R and they are great so much more comfortable than my 06 zx14 without them
put a set on my 08 and you are spot on friend
When I first bought mine, I installed these same risers for the same reason with the same results as you found. After about 3 yrs, I installed a set of lowering links and dropped the rear about 1-3/4". I quickly found the risers were no longer needed and took them back off. It was a definitely a pleasant surprise :)
That's good to know. I might be getting one soon.
I put a set of bear risers on my ‘19. Tossed the ugly caps in the trash. They look aweful.
I might get a set. One thing for sure that will get changed out is the oem seat. For me that seat is crazy painful and my 10r seat was way more comfortable. Before I order this corbin seat, I'll see if there is somebody in my area that could do something with what I have now and make it way better. If not, I'll order that corbin and toss this oem seat out.
Nice looking bike.👍
Legend 💚🖤
Awesome video great 👍
Liked and subscribed 👍👍😁
Looking good man I have a 2018 ZX14R ABS SE and Thinking about A Brock's exhaust how do you like the exhaust you have on your 14? is it a two brothers exhaust?
Yes, it's the Two Brothers carbon fiber slip-ons. I love it! The sound is awesome and it was a big weight savings.
Sweet!
Thanks for that man! 2:18
thanks just ordered some! nj
I have just installed some on my Gen 1 14. I cant get the blanking plates in? I notice yours are on the top & sticking out? If you was to take them back off and place the cap/cover on top of the riser before you put the bars back on it would sit flush inside the bars. Mine is about 1mm too wide so can't get in top or bottom. Did yours drop straight in or did you struggle? Good video.
I have the caps up like that because I liked the way they look, I could push them down flush or father if I wanted to. Oh, they slid straight in, no struggle.
Thank you homie for the info, will be doing that.
I did the same on mine, but drove the caps down flush. I'll likely regret that if I ever adjust the front end.
You have one awesome bike love that color combination man it looks good- but my question is why is the BBQ not fired up? time for some of my hot wings and a beer after looking at your bike -
Lol😅 thanks man.
Hows te windprotection with the risers? Do you have more wind on your head and body or does the shield provide enough protection?
The wind feels the same as it did stock; just a lot less to no pressure on the wrist.
Nice looking bike
Thanks. It was a nice bike.
I’m thinking about buying a 2021 Kawasaki ZX 14R for some sports touring , mostly touring clocking up 500 to 700 miles in a day . At 5 foot 7 inch I’m a bit on the short side . Just wondering how tall are you ? I ask you this so that I get an idea if 1inch to 11/4 inch risers will make it comfortable for someone of my height on day long rides . Cheers 🍻 🍻
I'm 5' 7" and have a 2016 zx14 with 1 inch risers. Yes, thay make a big difference. However, when on the highway, trying to tuck in becomes an issue. But when riding within the city they work great
Sweet Bike
Where to find yoke caps for fork tops???? Any help
Please post a link where you got the risers in the description. Thank you
I got them off Amazon. It's been awhile but they are exactly like these >>
TARAZON 1" Lift Handlebar Risers Adapter Handle Bar for Kawasaki Ninja ZX14R ZX-14R ZZR1400 2006-2018 www.amazon.com/dp/B07PK29VBS/ref=cm_sw_r_apan_glt_fabc_148B6HQXRRGPTFWBKCCZ
love them thanks brother !!
I got a 2015zx14r thanks for the video what is ur height
Cool man, I'm 5 feet 10 inches.
Hello, do any of your levers hit the fairing when you turn tight? Thanks
No, they don't.
Hay man Just a little update on my 2018 ZX14R getting ready to put some Voodoo exhaust slip-ons and a double bubble wind screen. I will be posting it on my channel #torah57mitch.
Cool man, can't wait to see it! You got a nice looking 14!👍
I'm considering higher risers than my present 3/4 inch Heli bars on my 14r.
I might go higher than your 1 inch risers (1.25inch)
Ifyou turn your bars to full left (as to lock the bike) how close are the throttle cables from rubbing under the fairing?
J.
Any higher than what I have and the brake master cylinder will hit the fairing.
@@markurbancowboy
I suppose I could bend the master cylinder down a bit. How is the cable clearance to the fairing with your setup at the full left turn position?
J
@@jscottc6675
I supppse you might be able to do that, I don't know. I can't answer the cable question as I no longer own the bike, traded it two months ago (but the clearance was good with my set-up). I went back to a HD cruiser just to slow it down some. Lol, was going to get hurt or in to much trouble. 😊
Can they rise any higher without affecting the handling too much? I actually need them just a little more for my tortured wrists👍
No, unfortunately any higher and they will hit the fairing. The brake master cyclinder is barely clearing the fairing as it sits.
@@markurbancowboy thanks!
You can fit heli bars. You then would sit upright. I fitted heli risers for an 1and quarter inch rise. A double bubble screen .then lowered the seat. Can sit upright at 160 to 180kmh. The stock position is only comfortable at 250 plus. For a real really fast sports tourer it probably should have almost normal bars and a bigger screen .
I feel you but I am not sure I will like the straight up stance -
Cost you about $40 and 15 minutes to find out. The only difference is you are putting less pressure on the wrist.
Very nice, where is the link
They are all about the same, I got these off of EBay. Just go to EBay and type in ZX14R risers. You will get a bunch of riser links. 😊
What brand of mufflers do you have?
Two Brothers carbon fiber slip-ons.
Ok I have thought about doing that to my ZX-14R #TORAH57MITCH
What’s that noise? Sounds like somebody is running a saw in the background.
Yep, they were doing some construction a few houses over.
Hi what's your mileage,,,for normal ride
About 50 or so miles.
At 5'11", would these be a good investment?
I ride a ZX-11 at the moment and I'm picking up a ZX-14 tomorrow. On the ZX-11, I definitely need them. Just wondering if, for my height, the ZX-14r will be the same.
I'm 5'10" and they are perfect for me, you don't lean over as much and it is a lot more comfortable. The risers don't cost much and install takes about 15 minutes so you're not out a bunch of money and time if you don't like them.👍
@@markurbancowboy Well, last night I ordered a set and can't wait to install them.
I'm riding from Texas to Georgia and figured the extra comfort would be welcome over the long haul.
How tall are you? And do they make any higher then 1 inch risers?
I'm 5',10". I think an inch is about it because any higher and the brake and clutch cylinder will interfere with the fairings.
@@markurbancowboy ooh okay thanks. And did you try a sargent seat or corbin seat yet?
@@thisguyfromyoutubesaid1537
No, to tell the truth, I went back to an HD again. The 14 was nice, but I just need a cruiser for now.
@@markurbancowboy i gotcha, i have a yamaha fz1 my self with a sargent seat and some bar risers . Its the best of both worlds comfortable and fast
@@markurbancowboy and cheap
I can imagine it feels even better when you have someone on that back, because man...that's a lot of pressure on your wrists.
What??
@@ColonelCampbellAI2024 When you have a passenger, you are supporting their weight, and it's hard on your wrists.
So that's why I said I can imagine the risers will feel better on your wrists when you have a passenger on the back, because you're supporting less of their weight because you're sitting more upright.
@@drew63215 No. You don't load your wrists or you're riding wrong.
You're also not anyone's bodyrest but you choose who you carry so-
@@ColonelCampbellAI2024 If you're on a sports bike, I don't care who you are, you're going to have to support that person's weight at some point.
Trust me, you'll more tired with a passenger than you would be solo.
Just subscribed to your channel... check me out as well ..... this is a very informative video .... as I'm strong considering a zx14r next as me next bike.... im bouncing between the zx14 & the busa
I had a 2004 Busa and a 2008. The 14R feels a lot more comfortable.
@@markurbancowboy man thats what I keep hearing!!!! Just so many good things about it ........ im currently on a 1199 Panigale...but need/want another bike for some roll racing but I also want it to be super comfortable....I can only ride my Panigale about 4hrs straight until ill need a break hahaha 😅
@@DudeMungus
You'll love the 14R. This has to be the most comfortable sportbike out besides an FJR or a Concours; add some risers on the 14R and it will compete with them on comfort. Also, there's nothing like the brutal acceleration of this thing, it's ungodly!😁
markurbancowboy sweet man appreciate you dude !!!!! I’m researching like everyday man ... I appreciate the advice 💯
@@DudeMungus
No problem man. Take care and I have subscribed to your channel also!👍
yeah don't pop any wheelies at that price
1. There shouldn't be excessive weight on you wrist while riding. Grip the tank with your legs and hold yourself upright. Your arms should be loose.
2. Your brake lever will hit when the handle bars are full tilt.
3. You may want to consider an actual tour. Like a Concur 1400.
Nice bike, but still, not a bike for long rides,
Yep, that's why I got a Harley Road Glide. Much more comfortable. 👍
Thats what a yamaha fz1 is for. Got one for like 4,000 dollars with so many upgrades just put inch up and inch back handle bar risers on it and a sargent seat. And i could ride it all day
There should never be weight on your wrists or you're riding incorrectly 🤦♂️
Lol. Whatever.