Video není dostupné.
Omlouváme se.
Discovery sport engine noise.
Vložit
- čas přidán 7. 05. 2018
- Discovery sport, Ingenium balance shaft fault. replacement of the shafts require an engine removal and heaps of special tools.
it appears that the needle bearings fitted are the cause of the fault im going to mic the bearings surfaces. the races are quite blue'd but i think that might be part of the hardening process
My XE has been making this noise for a few weeks getting progressively worse. Jaguar Assist suspects its this issue, and it does sound exactly like it. Booked in for a dealer visit - thanks for posting to help compare!
no problems bud happy to help.
The blue color is from the heat treatment in the production
Agree, I was going to say this but then saw you down here.
The blue is the factory heat treatment process to harden the shaft surface for the bearing
DPF regeneration excess fuel passing the pistons is causing oil dilution. I bet that's 99% the cause of this failure. Oil is cheap, engines are expensive so change the oil sooner.
Hi my the topics from Land Rover jaguar seis 12.7 hour of work. Haw long you guys finish it of ?
roughly a day out, a day for repair and a dayto put back together.
18-20ish hours
Hi ,Thank you for your help . Are you change only the bearings or all balance axle ????
How You aligned the balance shafts? Thanks for help.
Can you please post or share the removal and installation instructions of these balance shafts. I got the same problem and no access to Topix. Thanks
I have discovery sport 2.2L diesel 2015 model, I don’t have any noise but the engine shakes like crazy, in idle or sometimes in the highway, when going on a long trip, check the injectors , the engine mounts and EGR, no issue, but can’t find the problem behind the extreme shaking.
The balance shaft problem is only for ingenium engine? Just windering because I have ecoboost engine. Thanks
correct mate, only the diesel engine.
the ford petrol engine does not have the same issue.
Oh no!!! The blue color is from surface treatment, how can you not know this? Its on crankshafts too, and many other parts in an engine.
Would you mind to send the contact details of your workshop?
Does ingenium 2.0 diesel (150/163hp) have a good reability? Can it live 200.000+km?
I think with 10000km or 6000 mile service intervals id be confident getting that mileage.
@@supersavage123 and what about 9hp48? We bought discovery sport 2020 with 150hp 2.0d ingenium and 9hp48. Is it reliable modification? (We want to own it 10+years and 200.000km without big and expensive problems. (Oil and other usual things will change every 10.000km)) What do you think?
In the Land Rover service instruction N128 only model years up to (including) 2018 are mentioned as being potentially affected by this problem (I assume same goes for all Jaguar models with Ingenium Diesel). Does that mean that, from MY 2019 on, different balance shafts - or its needle bearings - have been implemented which are less prone to that problem? What exactly changed between
DS 2019MY - 8 month old, awaiting time to replace them, exactly same issue
@@MishaDobrovolskyy I've got the same with my 9 month old DS 2019MY
@@kostyantynparshin4827 вы из России? Как авто поживает? У вас 150 л.с.?
I want to watch full video for timing fixing
Balancing shaft bearing can change?
WHICH SPECIAL EQUIPMENT DID YOU USE?
I had access to all landrovers factory tools. Made it easier
The noise it produced was the squeak?
correct it was no longer present after the replacement
@@supersavage123 thanks man! I have this sound in a 2016 mini cooper, after 5 minutes it dissapears, the sound that is produced is the same in this video czcams.com/video/_aJgYhayN3o/video.html
I have 2 weeks of warranty, and I can hear whine only a little bit.should I report that? I have 78000 on clock.
definitely contact your dealer and have it reported
@@supersavage123 they said, that's nothing special
at least its noted in ypur history.
You don't need to take the engine out to change them.
yeah this was our first one. didnt think we had to.
@@supersavage123 But you fixed it! That matters the most :) have a nice day! :)
finish milling out the double helix and power port the block
and balnce ure gears instead
have you find the solution yet?
yes we replaced the balance shaft assembly's and the noise was no longer present.
@@supersavage123 could you please roughly how much will be spent on this car?
@@supersavage123how much did it cost