Fix Recirculation Flap Motor V154 or V68 VW Polo 9N Mk4
Vložit
- čas přidán 25. 07. 2024
- VW Polo air recirculation problem fix AC goes randomly cold to hot. www.ionhowto.com/vw-polo-9n-m...
How to fix VW recirculation flap motor V154 or V68 Polo 9N Mk4.
The VW Polo 9N Mk4 problem:
When you press the air recirculation button and it does not start or the recirculator flap doesn't work sometimes.
Air recirculator flap stops working randomly. Recirculator flap doesn't start when in reverse randomly.
Chapters:
0:00 VW Polo 9N Recirculation Flap Not Working or AC randomly changes to heating
1:10 Acuator Positioning Sensor Acuator V154 or V68 problems 6Q2907511
7:05 Remove Acuator Positioning Sensor Acuator V154 or V68 6Q2907511
10:49 Fix V154 Motor Potentiometer with WD-40 or contact cleaner spray
23:07 Install V154 or V68 Motor in VW Polo 9N Mk4
25:08 Align Gears as seen here don't rush, screw holes and gears must be aligned
27:04 Check the recirculation flap working and not misaligned or clicking when opening or closing
28:32 Test AC and air recirculation buttons
29:30 Test AC Cooling and heating function with recirculation
33:00 It's fixed, comment bellow and share
Also this problem is related to a much harder problem to diagnose and fix.
If you use Air conditioning AC is on and randomly the car start blowing hot air then cold air by itself.
Or you use the heater and the heater power is lower than before this is because of the flap mixing air from AC and air from the heater core.
The Heater core uses the engine coolant and a radiator to bring heat inside the car cabin so heating will only work when the engine is warm not cold.
If the Heater does not work it might be the heater core being clogged - let me know if you want to see a video about how to unclog the heating core.
If the car moves from cold to hot by itself, this will fix it!
It works for both the air recirculation flap problems and for random changes from cooling to heating inside the car.
Watch the whole video without skipping. Watch the video BEFORE you start working on the car.
How to remove and install glove box • How to Remove or Repla...
Subscribe for more videos.
Fix V154 Motor Potentiometer with WD-40 or contact cleaner spray steps in the video.
Holder for Recirculation air positioning motor part number 6Q2.819.379 / 6Q2 819 379 or 6Q2819379
Positioning Motor for Recirculated Air operation Code V154 or V68
Part number: VW 6Q2 907 511 A compatible with 6Q2 907 511 or 6Q2907511 / 6Q2907511A
VMC 12V motor with potentiometer sensor built-in
Amazon: Air recirculation actuator motor VW Polo 9N rex.red/air-recirculation-act... *
Jumper cables rex.red/jumper-cables *
Jump starter battery booster rex.red/jump-starter-battery *
Tools rex.red/car-tools-kit-mechanic *
Cleaning rex.red/car-cleaning-supplies *
WD-40 rex.red/wd40 *
Torx socket set rex.red/torx-set-socket-45-55-60 *
Jack rex.red/car-jack *
Stands rex.red/car-jack-stands-heavy... *
Gloves rex.red/car-gloves-mechanic *
Safety glasses rex.red/safety-glasses-anti-fog *
Spark plug removal tool rex.red/spark-plug-removal-tool *
Spark plug Gap tool rex.red/spark-plug-gap-tool *
Coil puller tool rex.red/coil-removal-tool *
Car fuse set rex.red/car-fuse-kit *
Battery tester rex.red/car-battery-tester *
Maintenance kit rex.red/car-maintenance-kit *
Subscribe and Ring the Bell to watch more videos.
ION HowTo rex.red/ionhowto
RedNumberONE rex.red/rno
Buy merch store.ionhowto.com/
Check it, buy it, post it and tag it #ionhowto or #rednumberone
Join this channel to get access to perks:
/ @ionhowto
We earn money from qualifying purchases using our affiliate links.
Affiliate links are marked with a star. *
When you use our * links, you support this channel.
As an Amazon Associate I earn from qualifying purchases.
Contact email for business inquiries ONLY diyrno ( at ) gmail.com
Any questions?
Feel free to ask in the comments section bellow.
Subscribe, Like and SHARE this video.
Recipes: www.rednumberone.com/ - Jak na to + styl
Amazon: Air recirculation actuator motor VW Polo 9N rex.red/air-recirculation-actuator-motor-vw-polo-9n *
Jumper cables rex.red/jumper-cables *
Jump starter battery booster rex.red/jump-starter-battery *
Tools rex.red/car-tools-kit-mechanic *
Cleaning rex.red/car-cleaning-supplies *
WD-40 rex.red/wd40 *
Torx socket set rex.red/torx-set-socket-45-55-60 *
Jack rex.red/car-jack *
Stands rex.red/car-jack-stands-heavy-duty *
Gloves rex.red/car-gloves-mechanic *
Safety glasses rex.red/safety-glasses-anti-fog *
Spark plug removal tool rex.red/spark-plug-removal-tool *
Spark plug Gap tool rex.red/spark-plug-gap-tool *
Coil puller tool rex.red/coil-removal-tool *
Car fuse set rex.red/car-fuse-kit *
Battery tester rex.red/car-battery-tester *
Maintenance kit rex.red/car-maintenance-kit *
Subscribe and Ring the Bell to watch more videos.
ION HowTo rex.red/ionhowto
RedNumberONE rex.red/rno
Buy merch store.ionhowto.com/
Check it, buy it, post it and tag it #ionhowto or #rednumberone
Join this channel to get access to perks:
czcams.com/channels/x4Qbp3iC97kQzj7e7g7slg.htmljoin
We earn money from qualifying purchases using our affiliate links.
Affiliate links are marked with a star. *
When you use our * links, you support this channel.
As an Amazon Associate I earn from qualifying purchases.
I had to disconnect my actuator flap motor and been running the car without it for a year now. However there might be a slight power loss. But not worth the $200 spare part (Volvo). Then I found your video. You are extremely clear about what to do and what not to do. Awesome tutorial, thx a bunch!
Had to chose to either make a 8-10 min interesting appealing video or a 40+ min detailed one.
Hope you get yours working.
I used contact cleaner spray before and it works for a while but doesn't last.
WD-40 lasts a long time.
@@IONHowTo You're not gonna believe me but I thought the video was about 10 min long. I just jumped to the parts where I was confused the most. And I didn't even notice it was that long lol Keep up the good work mate! Cheers from Turkey ;)
I also want to add that your camera skills are amazing!
@@noudialp Thank you!
Thanks for your video! I’m Brazilian and I have a VW Polo 2004. I apply contact cleaner before too. In my language a only found this option, but now I will test WD-40 that you show. If success I record a video to help peoples in my country. Thanks
WD-40 will not seem different while you do it but it will last longer.
Record it for sure. These videos started as a way to log what the parts looked like before I take them apart.
First was pictures, then videos, then uploading.
Start a channel with the repairs you do!
Boas, amigo conseguiu resolver o seu problema apenas limpando ?
@@user-gu5fs9yv3pConsegui sim amigo! Usando WD-40
Muchas gracias por el vídeo y que tenga subtítulos un detalle😊.
Consegui entender que le pasaba al dicho aire, lo solucione eso sí la postura para hacerlo un poco complicada.
Thank you very much! I fix it! Also cleared air motor)
Thanks Ion
Thank you so much for posting this video, you are very kind to take the time to do this to help people like me. Can you tell me what position the flap should be in when the recirculation light is on, (mine is permanently stuck in the on position),
Thank you.
Light on means the flap is open. Not sure on this how it would look like but I didn't have to turn the potentiometer and it would have been very hard to do anyway.
You can replace the whole motor assembly that includes the potentiometer.
In the video the flap was closed when I took it out - you could use it as a reference.
Make sure the flap and hot/cold gears go on the motor gear as shown in the video.
@@IONHowTo Thank you, It's people like you who make the world a better place, God bless you.
Thx it was a huge help!
Thanks for watching!
Multumim de video.
Si mie-mi da pe VCDS eroarea 01271 - Motor pentru reglaj clapeta temperatura (v68)
000 - elaborare coduri necunoscuta - intermitent
Going to look at my Skoda Fabia today, maybe removing the fan motor first would enable better access to that motor?
Be interested to know if the hot/cold motor is the same procedure.
You could remove the heater blower motor and check it but you don't have to.
This motor is for both recirculating flap and for hot cold adjustment. I don't know how it can do both but there is no other motor there on my car.
When you have hot air / cold air problems this fixes it.
This also fixes recirculating flap problems where it turns on and off or not on at all.
Its located in a different spot on the fabia (i am trying to fix it myself on the mk1 fabia). Its on the left side of the middle-console. Hatboy harvey has video showing it: czcams.com/video/kpv-mzBT8dQ/video.html My car is left hand drive so unfortunately its a bit difficult to get access to it so far..
I think there is a flap controller motor for temperature also. Recirculating flap and temperature flaps are different i think
Bonjour. J'ai une polo 9n de 2004 et j'ai réparer le servomoteur v154 de recyclage d'air . Après avoir batailler pour le remettre, j'ai un doute sur les volets au niveau de la soufflerie . Je ne comprend pas le fonctionnement mais es que c'est normal que quand j'appuie sur le recyclage d'air ; le volet qui fait la liaison entre l'habitacle et le moteur se ferme et celui au niveau des pieds s'ouvre et inversement quand je desactive le recyclage d'air , merci =)
Sounds right, the flap on the passenger side foot well should be open when the recirculating light is on.
Su apoyo para traducirlo a español, saludos desde Tampico Mx
Please see subtitles - Select Spanish captions
Bonjour . Sa fait 4h que je n'arrive pas à le remettre . A vide il fonctionne. Une fois mit, sa force ... je l'ai démonter ouvert avec la roue au milieu. Faut t'il la mettre à fond à droite ou à gauche ? Merci
The recirculating flap was closed most likely when you took this out.
Move the flap to closed and use a flashlight to see there is a second gear inside next to the recirculating flap.
Watch the video carefully to see the gears position before removing.
You should use a flashlight and don't force it.
Then alignment is correct, this motor slides between the flap gear and the second gear so that it moves both when it's opening and closing.
Hope you get it back in.
I love your content and your knowledge but could you fix my car (most cars or just your car?) I have a 2007 VW Jetta Wolfsburg Edition that was just given the thumbs up by an appraiser
Hi! Ive been looking for this video for 3 years!!!!!!!! Thanks alot for it! I have the excact same problem. If I start the car with maximum heat it will blow maximum heat.
And same with cold. But when I change from max to for example 22 degrees the car blows just minimum heat (the coldest).
I have a my steering wheel on the left (not like you on right) so the part you changed dont have the same OEM number, Do you know the OEM number for my car?
/Viktor
Thanks for watching, I don't have another car.
Maybe soon a VW Golf or better if the channel goes well haha.
Google for forums with the same problem.
I did this fix many year ago but never recorded it.
Got asked so many times but wouldn't open the car just to make a video... Until the thing started making problfms again.
Now it's recorded in full 4K HDR (I thing).
Use WD-40 not contact cleaner.
It will last much longer.
@@IONHowTo WD 40 Electrical Contact Cleaner? or just WD40 straight up?
Thanks for answering me
@@viktordavidsson8017 Thanks for watching.
It's straight classic wd-40.
Before, I used contact cleaner on the same thing before and it lasts much less.
Wd-40 inside where the contacts touch. Spray a generous amount and dry the outside with a paper towel.
Don't spray wd-40 on the gears. Those have grease that doesn't need to be disturbed.
Hope it helps you!
It worked. Recirculation is fixed now. But this didnt fix the slow switching from cold to hot and vice versa. Any other motors that need this treatment in order to fix this issue? Thanks
The speed will not change.
The problem that happens usually is you set it to middle and goes full hot or cold and goes from cold to hot on it's own.
@@IONHowTo it also switches from hot to cold on its own. Another motor is apparently responsible for this.
@@xoDaniell3 oh Maybe I was confused about it. For me this time was the recirculation but had the hot cold problem too before. Hope you can find how to fix it
The information I have is that to open this box, you must first heat the fittings, it can be opened without breaking...
Sounds like a good idea if it's not too much heat
Where the exact location of v68 temperature flap motor?
is recirculation flap motor for right driver side same the left side ?
Probably on the other side but not sure - see in fron passenger foot well area.
@@IONHowTo ok thank you
dude there is no v68 on this video
Salut! Ce motorizarea are polo ul tău? Ce cod motor?
Salut AZQ 1.2 petrol
Hello. I have the recirculation light always on. When I switch it off, it will switch on again automatically. When I put in reverse the light switches off.
That's strange, for me it was always off. Check if the recirculating flap moves at all and if there is something blocking it from closing.
Flap open - light on.
If it can't close it I guess it's what you have.
@@IONHowTo Thanks. Tomorrow I am gonna check the flap.
@@OrgoneBlasterdid you fix it? I have the same problem
@@Gadaff1same did you fix it?
When the recirculation is active the flaps is open?
Yeah, it's open to take air from the car instead of bringing it from outside.
ok perfect. the last question: Can you confirm that there are 2 flaps and they are both open?
@@antoniooriolo7158 for me there is one flap as far as I see. Maybe it's 2 and I didn't see it.
Yes there are 2, that's why the white gears are 2
However, I think both are open when recirculation is active.