Chain Drive Spool for Crosskart/Mini Buggy/Go Kart: Affordable Easy NO LATHE (part 2)
Vložit
- čas přidán 19. 01. 2023
- Check Description for links to plans, detailed build series, FaceBook build group and more!
A year of development has led to this; A super strong Center Carrier for any IRS application without the need for a lathe. Built from readily available off the shelf parts along with accurate laser cut parts so you can assemble yourself for a fraction of the cost. This is what you have been looking for! I know this because as a builder I've been trying to find this for almost 20 years. Plans below show the required parts with part numbers for a complete IRS setup for 420 or 520/530 chains, .dxf files to upload for laser cutting, measurements for all parts, every single nut and bolt needed for assembly and plenty of pictures and walkthroughs. This setup is appx 56" hub face to hub face and has proven 15" or more of travel without binding. This has been missing for the home fabricators for too long. Enjoy!
-Kyle
Plans available here:
kj-raycing.dpdcart.com
100+hp Build Series Here: • 100+HP Crosskart Build...
Budget Build Series Here: • Inexpensive Crosskart ...
2 Seat Crosskart Build Series Here: • Two Seat Crosskart Bui...
VF-1 Plans detail and Materials needed
• Crosskart Plans: KJ Ra...
Custom length chassis
• Inexpensive Crosskart ...
JD’s garage: / @jdsgarage701
Preferred tubing bender and notcher
Roguefab.com
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) / 905565813954510
Instagram @kjraycing
Storefront kj-raycing.dpdcart.com
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.
You could use send cut send to make you a drill guide to transfer the new hub pattern.
For drilling the 4 on 110 perfectly, create a drill jig with the 4 on 100 12mm, then at 45* create the 4 on 110 10mm. You only really need 1 pattern laser cut, then you can drill both hubs before removing the 12mm studs. Perfect spacing and centering.
Hmmm i see part 2 is giving answers...
Lol u answered it in the video 55.5 inchs hub to hub
I know this is about affordability but I would just use wheel adapters. This way you would have more room for what ever wheels you want to run, if you are placing the brakes at the wheels.
Hy, you make a super kit for building the rear transmission. But I live in France, and with shipping and custom, it will be too expensive. Very nice job. Kris
I use a 6 spline PTO shaft and 4 bolt bearing blocks on my setup. The blocks attach to a slider bracket with bars with heim joints as adjusters. Hoping it'll hold up to the 20hp I have planned for my 3 year olds first car lol
Chinesse kart rear independant suspension. Gkm200
What are those shocks?
My new favorite channel I'm officially hooked
This rear drive is what really sells it for me! WOW!
Always keeping it budget friendly. So awesome Thank You again!
Luv your work!
Thanks.
Love the channel and all the info you provide! Definitely building one of these when I’m done with my drift car.
Yamaha Blasters have a 4x100 rear wheel bolt pattern. Wheels are available.
hey great video I enjoy them all I like the end game big savings to I did notice your axle explained E break ring Is a ABS wheel speed sensor tone ring or what ever lol but not a big deal all your work looks top notch!!!
very good my friend
Impressive.
Nice.