G35 SEDAN BLACK ON RED FLAKE PAINT JOB P.O.V
Vložit
- čas přidán 16. 04. 2020
- Thanks you for watching! Please join the broskies!
/ paisadrift
Help support the channel
filidriftstv.bigcartel.com/
Follow me on instagram
/ filidrifts
Save 10% when shopping for your Z wide body kit use code:
FiliDrift_CCC
crowncarboncrafting.net/ - Auta a dopravní prostředky
2 years later im going to prep the car again and repaint it! Cant wait to show you guys stay tuned🫡
What gun for flakes and clear
Looks good. I've been spraying and doing metal flake for 40yrs. New flakes are definitely more forgiving than the old ones lol. My technique is, my 1st coat of clear is without flake, then my next several coats of clear is with flake. I finish with 5 coats of straight clear to bury the flakes. After 24hrs or so I sand it with 1,200 grit, then shoot another 5 or 6 coats of straight clear. Then wet sand and buff it out. Did alot of '49 Mercs back in the lacquer era, 600 grit to wet sand the clear. Young bucks today are like WOW 600! Lol. 600 was the finest back then, lacquer compared to paints now are night and day too lol. Anyways I thought I'd share from one painter to another 😎 I'd love to have seen the car outside.
I’d like to know a complete process
My first lacquer flake job was in 1962.
How much clear coat do you use? I’ve got a single cab truck that I’m painting and not sure how much I’ll need, not painting the tub/tray
@@harrybottmtb8947 Depends on how many coats of clear you want and what your mixing ratio is. So if your ratio is 4:1 clear/activator and if you're using a hvlp gun, a gallon of clear would do it, giving you 5 coats of clear. I use a SATA and it does really good on saving material. When I shoot metal flake I use my Binks model 7 and then the SATA with clear, no flake. Question, what color are looking at painting and metal flake or no? Because that would change my suggestion on a gallon of clear lol
@@harrybottmtb8947 Another question is if you're doing the door jams and under the hood. I know at the car manufacturer I work at, on an average size vehicle, like a sedan or SUV, we use 3 quarts of clear, 1 to 2 coats on the jams and 4 coats overall. You can cut back on material if you use a wet look. It'll give the illusion of tons of coats, but in reality not that many coats. The clear we use it slightly thicker than the average. So a coat is basically a coat and a half due to the thickness. Back with your spray gun, depends on how open your volume setting is. Straight clear, (no flake), I set my around half open. Then I adjust according to how it's laying down etc.. I hope this gives you some idea.
Gnarly sparkle dawg looks good, I’m a body tech, if you tear down the handles mirror and body moldings etc. you have more coverage on detailed areas and less chance of peeling paint
You have to bury that in clear coat after it's done to get that orange peel out of it and then wet sand it and then buff it till it shines maybe four more coats of clear brother
You are correct Shaun about the paint process. Also the wet sanding is key in all paint jobs no matter what you are painting. I agree with you 💯
I shot a few metal flake job's. Primer. Base coat. Clear and flake mix. Clear coat 2 time's. Wet sand cut and buff.
Still looks good. Where are you located at homie
@@Tom-wq2mz so you mix the metalic with the clear coat then spray ?
@@Popcorx After the base coat is laid down, Yes I mix the Metal flake with the clear coat and spray it. Next clear coat it. You'll need to repeat the clear coat a couple of times to get the Metal flake buried and orange peel out. Be sure to cut and buff.
You need to wet sand the orange peeled base coat before applying clear, or you're just clear coating orange peel.
Nice job, and you did it without spending a ton of money, just shows good prep, patience with the application of the flake in clear pays off, Congratulations
Came out damn good......I did the same black/ white basecoats on my nova with the green pearl flake in the clear on my nova!!!!......looking good
Wow! Looks amazing! I love it!
Brother, I have to say I have been afraid of metal flake all my painting life. You totally owned that car and it came out extraordinary. To have completely fixable orange peel is nothing compared to other jobs that I have seen drips, runs, lines and uneven coating where these boneheads call themselves professionals. That really was a great job. I am ONLY adding this part and please understand that I am NOT a pro but this is what I have been told so many times. If it orange peels and the jobs is not up to your standard, 2,000 grit and level out that job, then add 2 coats of clear and see your results. This all comes as respectful advise but to see what you finished with, OUTSTANDING!!!
thank you bro! watch my newest video!
Thank you very much, I was looking how would one get rid of that orange peel.
Been trying to find a paint color to paint my 99 tahoe and as soon as I seen the finish i knew I found what I wanted‼️great video❗️also I subscribed🤙🏽
You know I watch every video, but you DEFINITELY already knew I'd be watching this video specifically! Cheers bro!
Sam Adven Media you next lol
I like the technique of your work. 👍
Looks sick bro but like imjustkeven said I'd sand it down n add 2 more coats make it look like glass
Tht finish is 🔥🔥🔥
Awesome! Badass paint job!
NO PINCHES MMS!!!!!🔥🔥🔥🔥🔥🔥😍😍😍😍🤤 you gotta show us how it look in the daylight broski
bien wow
You got skills bro keep up the good work.
Chingon broski getting better every time 🔥
Im trying im trying lol
Thanks for the helpful informative vid looking to do this color combo on my 02 Dakota
I liked. Bitchen affect. Fogging was flawless. I'd love to see that in the sun.
Wow! Wish my van looked like that!
WOW!!!!
THAT is a beautiful paint!!!
Fantastic!!!
I subbed and rang the bell!!!
Thank you for posting this video!!!
👍🏻😎!!!
I like it it looks good but I prefer small flakes but that's my preference but other wise the car looks great good job and I like the fact you did it at home.
Beautiful job thank you for sharing
About the nicest flake paint I have ever seen on CZcams.
I love the color. That's exactly what I want for my Durango
Would be cool🤗
Just for ur number-is +254722839718 Omosh
I love you
It looks absolutely amazing.
If I could make one request.
Take the car out of the shop and and present it in the parking lot so we can all admire it.
This way we can all "OOOhhh" and "AAAhhh" at the fine work you have done.
Peace.
Thanks bro not bad for $250😂
I still have my Binks #7 with .086. Metalflake tip, paid. $160.00 😃😃 brand new. The metalflake that is out now is a lot better than what we had, more sparkle and better color, NICE Job. Thanks
Oh wow!
That's dope! I want to do this to my 98 chevy k1500 but not as much flakes just black and red. Nice work tho damn!
Definitely some backyard DIY STUFF
Not bad for $280
@@FiliManriquez looks good buddy pretty sharp ride. Make your using different guns to spray primer,base, and clear.
I love the big flakes in paint my uncle Roy had a GT Bradley kit car buggy with the gull wing doors that had a full metallic silver sparkle look to it ....reminded me of glitter disco ball type shit it killed the street at that time this was in the late 80z
Hello idol thnks for sharing your painting jobs verry informative😊😊
Orange peel is never “normal” or acceptable on any paint job final product I don’t care what size flake someone uses. If there’s orange peel, the job isn’t done. Just one person’s honest opinion
Never said job was done lol. We gave it a nice wet sand after and the orange peal was gone.. again we ate not pros
What are you talking about? There's orange peel on every car that gets painted, you can try to get it as flat as possible but the only way to have no orange peel is cutting and buffing.
@@ArmaniTheGreat Right, and read what I wrote “If there is orange peel, the job isn’t done”. I’m not knocking the painter. He just presented it as if the job was complete.
@@jimserhant7741 Ahh understood, yea it did come across that way.
@@ArmaniTheGreat It’s all good. Enjoy the rest of your Sunday 😊
Pro-tip: Never start spraying ON the car. Start on the tape or start in the air right next to a panel.
👍🏻👍🏻👍🏻
Pro-tip: get my time in with your gun your coverage is garbage. Your flashes aren't even, if you put a scale to that afterwards you'll see what I mean. Just keep on practicing you'll look back an say WOW!💪
@@jadadsr.8351 hey bro....give him props...let him do him...im sure if he was a pro he would be in a paintbooth...the result was not bad for painting in a way crowded garage....im sure he will get better at all of it...we all dint start like pros
Advice plz. When you end a pass do you let the gun trigger go then redo press it before you come the other way? Or do like him and just hold it down constantly stating the whole time?
✊🏼 love these kind of videos
Legacy Garage theres more coming lol
CHECK OUT MY D.I.Y CZcams CHANNEL
Looks good. 👍🏼
Simone'. That looks really good.
Watch a few low rider painters and the techniques they use to get that smooth glass and high shine paint job. You can really learn a lot these days with all the free internet resources.
Looks sick Broski
I want to see a lineup of all the cars you painted that would be dope🔥
jose alicea soon lol
Ok when?
What a pretty car.
I’m definitely getting my car sprayed this color. I love black but always see cars with silver or rainbow flakes( so boring). This right here tho is awesome
Great job. It's best to put flake into an intercoat (base clear) then bury the flake in clear coat.
YEP
Damn dude that’s gorgeous looks amazing I bet it’ll shine like a new penny in the sun ✊👍
Yea
That's well nice I sprayed a bike the same in a much finer flake
You need to wet sand it and do a flow coat to bury those flakes.
Bad ass work I want to learn to paint so I can do that to my Z
do it!
Spray 2 more coats of just clear it will come out like glass! im about to do this same thing but im using .008 purp-fection
Yea, it came out nice after the buff
Sick paint bro
Nice paint job bro...✊🏿💯🤘🏿
It looks like ruby red slipper a ppg color
Hey do a follow up on how the paint is holding up. Great work!!
This got me wanting to start painting la neta
Ti nomas dale
I painted my wheels the same color scheme and my x5 is red flake over red. Took 8 coats of clear sanding and another 3 coats of clear
Do you have a supplies list of this? Like what did you use for this and how much did you need to cover the whole car? Im gonna paint my 8th gen civic si 4dr soon and this is the exact look i want. You did an amazing job. How much primer what kinda of base coat how much kandy red paint etc?
Looks good.
I wonder what candy pearl red over black with lighter mix and smaller flake of a combination of both red and gold flake would look like?
How was your experience painting your car inside the garage? Was there a lot of contamination? I’m contemplating doing my paint job myself. I actually want to do a light/medium coverage flake and a pearl topcoat so it’s more like colorshift/chromaflair but in the colors I choose
WOW. That's gonna sparkle so bright people are gonna be blinded.
Very nice, good job. GOD BLESS
It looks good
Chinnnngonnnnn sigue mi Yonke filli paint n body
Awe man. I watch a few other guys that also do bodywork and paint. But this outcome was especially nice. Love the red flakes on black. The black fades in as you are walking around then as you look at it the red pops out. Nice effects. SprayWayCustoms and custom z warriors is my main attention for bodywork and phenomenal paint. Yours came out especially cool man. NICE!!
Thank you, im not a professional tho😅
@@FiliManriquez. I kinda noticed that. You did this in Your own garage but the end result was awesome. Using the gun ? Keep it flowing but , stay with sections, a door, a hood, quarter panel, keeps you more focused and even. You did great. The result was cool.
For flakes i had to do it all the way because in sections i woulda had more flakes on one panel then the other.. this was my second car the first one i messed it up by doin panel by panel lol
@@FiliManriquez ya. I just watched some of the ending. Ok. I get ya. With The coverage you wanted it to have that bleed through from the black. I see what you did. Never mind I’m just a observer. Lol. Be cool man. You and yours be safe. !!
Thank you! We learning lil by lil 🙏🏼
That is a really cool effect--there's a similar video of a technique called "murdered candy" using Createx products but the flakes and pearl they used are much smaller than the flakes you used. I like both effects but definitely prefer the way yours looks. I'm gonna have to try your way but using purple flake. Thanks for posting!
Man that paint jobs looks good Bruh Bruh
Yo fili mad respects bro🤘🏼🤘🏼🤘🏼 but just a pointer I’m a painter after laying the flake lay out clear on its own without the flake it’ll come out clean and as far as the over spray put the box fans on front of you garage with the filters and block it with some plywood in between
Rv Vz i did do the second pass just clear no flake.. but that flake seems too big makes it pop lol. I will definitely try that for the overspray🙏🏼🤘🏻
No matter what size of flake you spray always shoot atleast 2 coats of just clear or even 3 so you don’t feel em and off course a wet sand will take all the orange peal off & the size don’t really do anything about the orange peel every paint job has orange peel till you cut and buff
Looks Good!
Great content man
DatBoi thank you bro🙏🏼
Mucho carro para mi lol. Thanks broski!
Ya sabes😍
This motivates me to paint my car 😁
David Z33 tu nomas dale💪🏼🔥
@@FiliManriquez pinta mi troca carnal por favor
VERY NICE JOB 👊🏾
Thanks 💯
Pasado de V! Te quedó perro
Add a live well and a trolling motor and jacuzzi jet drive and matching skis 🙌👍
This looks great, can you list all the products you used, also when you touch it, does it feel scratchy or like sandpaper, ? Please let us know
Love that color
Very nice job.
Absolutely fantastic paint job 👍
Beautiful!👍👍👍
Great job 👍🏾
Thank you! 🤗
I would have did the hood roof and trunk big flakes and left the arounds small flakes but its decent..good job
I didn't even Kno there was a difference. They got different size flakes? Cool
Nice like a ruby red
You will get a way deeper job if you sand then put two more coats of clear repeat twice
Damn I could tell it was gonna look sick after the first pass of clear lol
I love ❤️ the flakes
Bro you can also mix the flakes with clear base you can safe your money
Nice it looks good
Se puede mejorar aplicando otras dos capas de clear al siguiente dia despues de lijar con grado 800. Buen trabajo y el dueño del carro contento.. eso es todo!!!
Si...pero tambien si se lija el carro todo el flake k no se cubrio se va a convertir silver...so mejor poner le la makina asi y despacio...o lijarse con intension de ponerle un kandibrandywine en la siguiente pasada
Good looking job man, what paint was that? Valspar like interior paint?
Muy bien....el metalico creo que esta un poco grande pero se ve bien en general...
gracias amigo
what gun did you use, what tip for the flake 1.8? you like flakes in clear better than in intercoat?
Love you bro
wish i could get my '29 hot rod painted by you
Idk..... looks good at certain angles...but for spraying in a garage it looks damn good
Bro .
You just read my mind or something . I have a coupe that will soon be in need
Ta perron! Si aplico un poco de candy paint pezclado con los flakes dará otro efecto?
Nice work.
🙏🏼
What tip size you using to spray flakes?
Se lo difícil k es pintar con poca iluminación pero si kedo bien tal vez con la mitad de perla y dos manos de clear , buena combinación
I paint in my garage, but small motorcycle parts, I tried a car and yours looks way better than my end result. But I'm a shitty painter and admit it. Keep going looking great for a a garage job bro.
Im shitty painter too lol just keep practicing
I did the same paint job on my car and wondered how it would look on a grey base. I should have tested it before hand since the car looks black when its not in the sun.
how many coats of basecoat did u use? i’m doing the same red flake on my s14
Straight out the garage
Awesome bruh