FLEX PXE80 CORDLESS POLISHER REVIEW || IS IT WORTH THE MONEY?? || WATCH AND FIND OUT!
Vložit
- čas přidán 29. 08. 2022
- What is UP everyone! Welcome back to my channel! In this video we are diving in and taking a deep look into the Flex Pxe80 Cordless polisher. I give you my inside thoughts Pro's and Con's after over a year of putting it through its paces! With its ability to use 1", 2", and 3" backplates.. 3mm dual action throw ( Designed for sanding ) 12mm throw, and Rotory mode. This tool can do it all. Is this Polisher a right fit for you?? I hope this review is helpful! Thank you all and I hope you enjoy!!
#FLEXPOLISHERS #autodetailing #productreview
WANT TO PICK UP A FLEX PXE80??? CHECK OUT THE LINKS BELOW!
BE MINDFUL, SCOTT AT DETAIL DIVISION MAY BE OUT, IF YOU CAN BE PATIENT HELP SUPPORT A GOOD CAUSE!
FLEX PXE80
detail-division.com/products/...
FLEX PXE80 APS EXTENSION KIT
detail-division.com/products/...
FLEX PXE80 KIT FROM CAR SUPPLIES WAREHOUSE
www.carsupplieswarehouse.com/...
POLISHING PADS USED IN THIS VIDEO
GRIOTS GARAGE 2" FOAM CORRECTION PAD
www.griotsgarage.com/boss-cor...
GRIOTS GARAGE 3" MICROFIBER BOSS PADS
www.griotsgarage.com/boss-mic...
PHOENIX EOD PAPACUT COMPOUND
www.phoenixeod.com/product/pa... - Auta a dopravní prostředky
Awesome vid man!! You hit the nail on the head with this one!! Absolutely spot on👌 I have had the PXE80 for a while now and I can say it is everything you said it was and more.. seriously cannot do a detail without it!! It's truly an amazing piece of gear🤘😎
Mn with the conformation!!!!🤙😎 You said it! It's an absolute scalpel ! It's a great polisher! 👍 Love how versatile it is! Appreciate you taking the time to watch!
Eric, ultra thorough review. The battery life and recharge information along with the changeover demonstration… will be incredibly helpful to a lot of people. Thanks again for a fantastic video!! 💪🏼💪🏼👍🏼👍🏼
Thanks Tim! 🤙 yes. I tried to touch on the main things I wondered when I bought it! I was on the fence but so so glad I got it! Appreciate you taking the time to watch!
Eric, thanks again for putting this video together and including these APS parts... means a lot to have you give them a shot and want to spread the word about them. I WAS NOT a FLEX user a few years back, and the PXE is what made me want to go out and become a dealer... and in truth, I purchased my machine at full retail before becoming a dealer! Talk soon
Not a problem man! 🤝✊️ I can't speak highly enough about the quality of the APS parts.. really put the pxe80 in a league of its own. 👍 Sounds good man! Take it easy!✊️
Thanks for the review! I have been eyeing Flex polishers for the last week and I am convinced that it is the way to go. 👏
Hey Paul I couldn't agree more! 👍 absolutely loving my Pxe80... haven't touched my G8 since I've had it hahaha. The scalpel or polishers 🤙🤙 Appreciate you taking the time to watch!
Great review as always.
You never leave any stone unturned on a review.
That flex is pricey but I’m sure well worth it.
When I bought my Rupes LHR MKIII,pullithe trigger on the price was a little painful but no regrets now.
This flex will be the same scenario.
Please keep the videos coming.
George thank you sir! I appreciate you taking the time to watch! This thing is so worth every penny! High price bug probably only one you'll ever need! I haven't touched my corded G8 since hahahaha. Thanks again bud! Take care!✊️🤝
One excellent video on this flex polisher Eric. You can definitely not go wrong with flex power tools. I'll be looking at this polisher down the road. 👍🇨🇦
Appreciate that brother!!! Definitely a fantastic tool and I just love it! ✊️ thanks for taking the time to watch!!!🤙🤙
Thanks so much for the great video... Awesome; learned a lot!! Keep up the good work!
Hey Rick! No problem my friend I appreciate you taking the time to watch!👍🤙
Great video Eric. I got my PXE-80 a while ago and I also got the APS upgrade kits from Detail Division including the extension bars and the 2 inch backing plate and they also have another extension car that allows for those micro polishing pads with the little pin on the end like on those micro stick polishers that attach to the rotary's which is a great attachment I highly recommend anyone who has this machine purchase. Makes it so nice to just pop one of those little pads into the attachment and polish away cordless and not have to attach the stick polisher to a rotary which is cumbersome and takes time. Great for areas you need to micro polish like behind door handles, etc. which isn't often, but when you need it, you will be so glad you have it. I love my PXE-80 and I use it the most of my six different polishers. I have even polished my entire car with my PXE-80 with no problem, it just takes a little more time than with a 5 inch. I also apply all my waxes and sealants with the PXE-80 and a red waxing pad and it works FANTASTIC for that application. It's almost worth it to buy it for that reason alone. It cut's down on your wax/sealant application significantly! You can get around the entire vehicle in no time and in my opinion it does a better job than by hand because you are burnishing in the wax or sealant slightly which to me seems to do a better job. The PXE-80 is without a doubt one of the very best cordless mini polishers out there. Add the 2 inch backing plate from Detail Division. The PXE-80 is one of the very best micro polishers available today and with the great attachments from APS at Detail Division, you'll have everything you need to tackle most polishing jobs. If you can only buy ONE machine and it was between the PXE-80 or a 5 inch DA or DA long throw. I would definitely recommend the PXE-80 because you can use it for all your polishing needs. If you can afford TWO machines, I would get this one and a 5 inch 15mm DA and you'll be set for all the polishing you will need to do on a vehicle!
Hey Joe! You are absolutely 100% right! Absolutely phenomenal machine. I do recall that attachment with the cone adapter! Will be my next upgrade🤙 the APS parts are very good quality. Makes the pxe80 a hell of a machine! I love it! Applying waxes for sure is easy with cordless.. really speeds up the process! All in all just a fantastic unit that I'd recommend to anyone in the detailing game! Appreciate your thoughts and glad you love it just as much as me! Take it easy my friend!✊️🤙
Hey buddy, first off, I love your channel. I’d been on the fence about buying this product for a while now, but watching your review sealed the deal. Keep the videos coming. I went ahead and purchased the APS package too so that I can use cone pads for those annoying impossible to reach areas and to get the other extension and 2” backing plate. Hopefully this will increase my quality as well as efficiently.
Jerrod , thank you man! I appreciate that! You'll absolutely LOVE this unit and all it's capability..! I put extensive work in with it before I made the review. Just so I can back it! It will increase your quality for sure. Thank you again! Means a lot. Take care!!!🤙✊️🤝
Like your demo and information and the versatility shown too.
Wayne, thank you man! Appreciate you taking the time to watch!🤙✊️
Hey Mr Smurf! Was realizing I hadn't seen any videos suggested from you in a bit so had to search you up and getting caught up now. I just recently picked up the Maxshine nano polisher on autoality and have been loving it. Glad to see you still keeping on!
Hey Chris! 👋 yeah life got insanely busy for the Smurfanator! 🤣 Appreciate you tuning in and catching up! Glad to hear your liking that maxshine mini! It looks like a solid little unit!🤜🤛 as always, thanks for taking the time to watch! ✊️
@@PapaSmurf918Detail yeah lord knows life is crazier by the day. I'm still doing full time maintenance at Pepsi but the Detailing business is going pretty amazing too. Did a polish and coating on a 200k Mercedes AMG recently and have a Maserati coming up soon 🤜🤛
@@chrismorgan3302 That's is AWESOME man! 👌 some gorgeous cars right there! That good to hear the detail side is going well buddy😀
What's up bro! Hope you and the family are doing good! It's just a matter of time before you and your channel blow up dude. Your videos are so on point and help everyday people like weekend warriors(myself), to where we can not only pick up the knowledge your dropping but also give us confidence to do some of these things you show us! The best "small" car detailing utube channel hands down dude. Thanks for all you share with us!
What's up brother! Man I can't thank you enough for the encouraging words dude! Honestly its people like you that make my days! Appreciate it man!✊️🤝🤙 I started this channel for just that, to help and encourage 👍👍 Oh and me and the family are well now, took a lil bit but we all fought it and are back to normal for the most part! Right on! Once again, thank you for supporting the channel brotha! You the man!✊️
@@PapaSmurf918Detail lol! Glad to hear the family doing well dude! Oh and I thank you for your words as well but I'm just A man talking to THE man bro!!
@@gogators5762 Haha thanks bro! Really, you've made my day! ✊️👍
Great review Eric, looks like a great polisher 👍👍
Eamon, thank you my friend!! It's a great unit! 👍
Great review and video! I would love to have one of there one day.
Thanks man! 🤙 oh yes. Definitely pricey but if you can afford it it's a great tool!✊️ appreciate you watching man!
Awesome video and product review brother. Amazing tool.b well brother
Thanks Richard! 🤙 appreciate cha man! ✊️
Thanks for the review; I ordered the Flex PXE80 today along with some of the accessories from Detail Division. Would be great if you could review the PXE80 Flexible Shaft kit sometime in the future.
Awesome! Oh man I'd love to review that kit! Seems so legit! Maybe I will one day! 👌 I appreciate you taking the time to watch!
Well done review Catguy made the perfect comment if your into detailing how can you not have one. 👌🏻👍🏻🇨🇦
Hey Ken 👋 absolutely right! 💯 it's almost a must have for ANY one getting into polishing! I do understand not everyone can afford it. Which is just fine. But, great tool to add to arsenal! Appreciate you tuning in man!🤝👍
Fantastic video with a great overview of this bit of kit. Would you see this as good for headlight restoration (UV coating removal when it goes yellow)?
Thank you! Yes, absolutely a fantastic headlight polisher as well as anywhere small or tight you need to fit a polisher! I absolutely LOVE this machine. Also, it's rival the Shinemate EB210 I have acquired an am playing with. It's also a GREAT unit👍👍 story for the delay in reply, was out camping! Appreciate you taking the time to watch! 🤝
I was wanting to buy this for for my job working in a car yard. Found you as my 1st review and have convinced me its worth it and what I need. Only drama is a new one here in Australia it costs $699.🥴
699! Woah that's a big difference than here. Still worth it though! Although I do see that price an it's hard I get it. Few jobs done and will pay it off! 👍 Appreciate you taking the time to watch the review! Hopefully you aquire and are happy!✊️🤝
I treated myself to this unit a few months ago. I love it. I don’t know that it has the same
Power as the G8. However it’s super convenient. Makes quick work of tight areas.
I'd agree. It doesn't have the power of the g8 but definitely plenty to get the job done. 👍 I love it for the intricate areas! Appreciate you tuning in my friend!✊️🤝
Flex is a legit company!!
Great review Eric...👊
Love my ShineMate 3" polisher. I'm ok with it being corded. Stay well my brother.
Thanks brother! 🤙 oh yes. Not knocking the shinemate. They are legit! Hope all is well my friend! ✊️
Pretty darn cool. Is that my Christmas present I'm looking at? Hmm. I've been looking for something smaller for those awful little spots. You'd be surprised how many of those spots are on a motorcycle! It's crazy. Good to see you, give family big hugs!
Hahaha I think Santa Will bring ya one! 😉 it's such a great tool! The 1 " pad on rotory can dial in the precision! ✊️🤙 Thanks Kim! We're all battling covid right now but we will pull through! 👍 appreciate you tuning in!
@@PapaSmurf918Detail heal up and get better. My son got covid last week. Getting better.
@@kimnewling5728 glad to hear he's getting better! Thank you. Will do!
I got mine last year on sale during a Black Friday deal. So worth it!
Mina, awesome! Definitely worth it!!! 🤙✊️ thank you for watching🤝
As always a great review!
Rich, thanks my friend! 🤙 appreciate you tuning in!
Very cool Eric the quick disconnect option is great and other accessories seems like a precise polisher little pricey I just bought the adams 3 inch 12 mm also I have a pneumatic 1 2 3 inch 3mm which does ok I’ll have to start saving for that one lol 😆
Thanks Corey! Oh man seems like your all set! I mean if that gets the job done then no obligation but it is a great unit! Loving it!!! Buuut if you need it.. you won't be disappointed 😄😎 appreciate you taking the time to watch!
I do like the cordless aspect of the machine. I'm totally hooked on the mini rotory from Maxshine. The Maxshine 550. I can do a lot with that thing, but I need 120volts and a cord. If and when that dies I will buy the Flex mini rotory. So I am really glad you're enjoying the pixie. It's just the damn thing is too much money in my opinion. Rock on brother Eric. Thanks 4 sharing.
Definitely. You kind of need a corded polisher as well. Having multiple makes every job that much easier! Thanks Larry, I'm absolutely loving it! Appreciate you taking the time to watch!✊️
I've been eyeing this thing !
Thing is AWESOME man! 👌 love it!
What's up Smurf! I absolutely love my PXE80. I got the 2 inch plate for it. I really want a extension for it. Take care!
What up man! Awesome ! Glad to hear all these people loving it as much as me!🤙 the Extension kit and backplates are a must! Really makes it a scalpel ! Appreciate you taking the time watch!
Just bought one to compliment my das 6 pro,cracking bit of kit for hard to reach parts,the cone pad attachment is a game changer
John, I absolutely LOVE the cone bit attachment!!!! This machine is so legit. Really almost a must for any high end jobs that require tight intricate places 🤙 I know a lot of people don't need that level but it's nice to be able to perform it! 👍✊️✊️ thanks for taking the time to watch!
Great review, just ordered 1 after watching this video. I've been painting and polishing cars for 30.years. I wanted something for delicate work on my motorcycles. One question, can you use 3" as a rotary?
Thanks Mark!!! You'll love this machine! I use it on every detail. If you get the cone attachment you can use various polishing cones for precise polishing! 3" is not offered in the rotory.. I modified my 3 inch plate to fit but then found out its not good for the machine?? So I never really used it. And haven't needed it! The 3" plate an 2" rotory is more than enough🤙 appreciate you watching and love to hear your feedback! Please keep me posted!
I can wholeheartedly recommend this tool to every enthuasiast detailer. I did my WHOLE car with this thing. Recharge is done in 20min or so and i got 3 batteries and just keep rotating them. Only for the hood and roof i took a full 5 inch DA, both otherwise i was just hooked! I also felt doing bigger panels with a smaller machine might take more time but upped my accuracy and results! Hope this helps anyone:)
Your absolutely right! This thing is just awesome!! Yeah it may take longer but you can really focus on smaller areas and get great defect removal 🤙 appreciate you taking the time to watch!
This machine is amazing flex makes some great machines love the review thank you!
Hey Ramiro! Absolutely agree! Flex killed it with this. Be hard to top! ✊️ appreciate you tuning in!✊️🤝
@@PapaSmurf918Detail I'm curious for what is released in SEMA I'm sure they must have something good cooking been a while since there last release even though no information or anything has been made just have a feeling SEMA will be a few releases from a couple of the top brands can't wait to see.
@@ramirotorresjr7518 they have made an attachment that turns the pxe80 into basically a Dremmel style handheld polisher you can attach cone shape foam pads on. To get the really intricate areas. It's not yet available here in the US but should be very soon!
@@PapaSmurf918Detail making it the ultimate tool! What if they bring it to the market then 🤔 I'm just wondering if Rupes might release a battery polisher to compete with Flex units while Flex release new upgrade versions of the current battery units I would for sure buy one of the units if either company do lol as is Flex makes some really nice units I just ordered my limited edition Flex 3401 unit can't wait for it 😊
@@ramirotorresjr7518 I agree. I'm suprised rupes hasn't released a unit to compete. But I'll be watching! It would be smart of them huh!
Great review.
Thank you Richard! Appreciate you tuning in!
Checking in
Got you marked down brother!
Woo! Nice shirt!
Thank youuuu!!!!!✊️✊️👍
Hi thank you for the review. I definitely changed my ibrid nano to this Flex. Do you know anything about the 3’ Extension Shaft by Flex. They announced it in a video about two months ago. Ty I like your honest videos.
Thank you! Um I haven't heard of the 3" extension from flex. But if you check out DetailDevision.com they have great APS Extensions and accessories for the Flex pxe80👍👍appreciate you taking the time to watch!!
I have the Adam’s SK Pro Mini Polisher. I would get this as an upgrade. Awesome review. Get well. COVID-19 is a beast of a virus.
Hey Al! 👋 oh man it would be a great upgrade for sure! Thank you my friend. Today is the worst of It I believe.. just trying to stay hydrated and rest! Thank you for tuning in to watch!
Cigs 19 ain't shit
Like you, the Speed 4 drop-down is odd. I don't mind the trigger once I got used to it. It's a great machine. And I don't know anybody else who has that little wrench! I know several guys with the PXE, but none with the wrench. Crazy. Good video review.
Yeah for sure! It's nothing I didn't get used to after a few tries.. ✊️ haha that's so odd that it doesnt come in the kit! I guess its the unicorn 🦄 wrench! 😄 Hey, appreciate you taking the time to watch! 🤝
@@PapaSmurf918Detail no problem. I've had mine for a while, but it doesn't hurt to watch, I'm case I wasn't aware of a trick, tip, or tool attachment 🤝
@@bbdetailing9123 You and I are alike man!🤙
Great timing man. I’m in the market for one this size. Thanks!
Ahh perfect! That's what I wanted to make the video for! I was trying to decide to pull the trigger for a while and so glad I did! Solid unit. 🤙 appreciate you tuning in!✊️
@@PapaSmurf918Detail always man. Tell FAB to pick it up…. 😎
@@Gary_Rigs oh man! I have been telling him that it's phenomenal but he honestly hasn't been detailing much. I've definitely recommended it though😁 lol
Hey Bud. I was thinking.
If you put the 1” backing plate on and a polishing pad with some PapaCut on it you can use it to polish your front teeth. The 12mil da might be a bit hard on the gums so the rotary option would be preferable. Polishing customers teeth can be a free upgrade if they get a detail. Or,,,,,, teeth polishing can be a side hustle. 🧐😉😂
Joking aside, excellent demonstration of the tool. By-the-way, a good quality tool that doesn’t let you down is totally worth the cost.
🤣🤣🤣 Don't give the Smurf ideas! Lol next video how to polish teeth!😎🤣 but definitely agree. Definitely worth the cost.. every penny! This thing is phenomenal! Appreciate you taking the time to watch!✊️🤙
Eric. Great review brother. I've going back and forth on this. I want something to polish my gloss black wheels and and a windshield here and there. I wish they made a cone adapter for my G8, but man the PXE80 is a beast. Thing is I'd only used is a few times a year. Any advice here?
Thank you my friend! I went back and forth so well, and although I got a good deal I think it's still worth it! However I know it's a steep price! Shinemate has there version! Cheaper and I think might be up your alley! Check this out!
carzilla.ca/products/shinemate-eb210-kit
I have this kit brand new I recently was sent to test. I'll be making a video for sure! But, for the price it comes with what you need!
@@PapaSmurf918Detail Thanks Eric. I've also looked at the Maxshine M0312, but I think the Flex has more power. That quick change is a game changer for sure.
@wescat2 Anytime! Yes I love the Quick Change feature especially when switching out from rotory to my 2" and 3" 12mm throw... the shinemate also features quick change heads as well!
@@PapaSmurf918DetailThanks man. Can't wait to see you review that one.
@wescat2 No problem my friend! Thank you for taking the time to tune in and watch! 🤜🤛🤝
I could not be without my PXE I have a 2'' rotary adapter as well for it.
Such a scalpel in the detailing world! Just got done using mine on a job👍👍 appreciate you tuning in!🤙
Papa Smurf, great and comprehensive/detailed review. It is possible to use Rupes pads with this Flex polisher?
Thanks man! 👍 yup, I have both 3" 2" and 1" and work great
Not yet for me. Looks awesome though. Do a headlight vid!....Whats the small rack of brushes behind you?
Kelly, I don't imagine it's for everyone that's for sure! Just hoping it helps those looking for something in that category or want one but wanna know if it's worth it🤙 those are my interior brush sets. The ones with the yellow are a little bit stiffer and the all black ones are the SPTA brush set off Amazon.. both are Amazon actually.
I actually did a headlight video! In my Prodigy series! Check it out here!
czcams.com/video/D4J94sABuZs/video.html
@@PapaSmurf918Detail thanks dude! I wish i could afford it. It looks great.
@@Hutch400 No problem! Always appreciate you tuning in!🤙
Love mine too! Just wish I can get my hands on a European hard case systainer, the bag makes no sense to me. All the stuff is just thrown in there banging everything up. Scored big time on mine, Ebay bid for $310! 👍🏻. The accessory extension to use cone pads is awesome as well from APS. Which 2” pad where you using in rotary? Where did you get the small clear storage case, is that from a Detail Division as well? Thx
Really? Your bag doesn't have pockets?? Mine has pockets for both batteries and all my accessories.. polisher and charger in center. Works well for me. 🤔🤔 310 that's definitely a score man!!!! Yes I need that cone accessory too! The 2" pad is the Griots BOSS 2inch pad.. I believe there is a link to it in description 🤙🤙 I also have the Rupes Yellow 2" pads and they are great on it as well. The clear case came from detail division yes, when I bought the APS extensions. 👍👍
@@PapaSmurf918Detail Well…it does have pockets, but I love a good hard case, just faster and easier to find stuff. 😁👍🏻. Maybe I can search for one online and see if I get lucky. Appreciate the videos! Thx
@@tundrawhisperer4821 I'd agree. A nice hard case would set this thing legit! Thanks man. Appreciate you always tuning in🤝✊️
Will the APS 3” backing plate work with the rotary extension?
Unfortunately not... I actually made my original 3" fit by drilling a hole but I found out they do not recommend it from flex as it is isn't good for the battery.
What is the cost of the extension shaft… who makes the extension shaft…. Liked your video
The shaft is 18.99... at detail division I'll provide link here
👍www.detail-division.com/products/aps-50mm-extension-adapter-fv50?_pos=4&_sid=69abef364&_ss=r
Good Morning 👋
Morning!!! 😁
can anyone confirm if the backing plate post mount is the standard size? i seem to see conflicting info
The backing plate post mount?? Im. Ot sure what you mean forgive me.
@@PapaSmurf918Detail sorry ..what I meant was is the screw that the backing plates mount to the standard size ....can I use a standard lake country 3,2,1 inch backing plate with this unit? .....I ask because I hate the hard plastic backing plates and prefer the softer foam ones
I got my stuff from Detail Division as well and I agree, Scott is solid and will be buying more from DT. APS is the ish as well and do not buy any other extension coz most of them wobble, APS is the only one that didn't wobble= vibrate.
Can not agree more. SO smooth with the aps units! Thank you for taking the time.to watch!
@@PapaSmurf918Detail so true bradah and with the smaller machine u can feel the slight changes in weight, APS pads and extension were well thought. Which adaptor are u using most of the time? I’m loving the rotary with the microfiber for deep scratches or to polish headlights or wet sanded surfaces, it takes a bit to learn not to go over board but ones u get to know the tool it’s pretty amazing on what you can accomplish. And also I’m with u on the settings …setting 1 and 2 for me is enough I barely on 3
@@1kontrabida Sorry for the late reply! Idk why I don't get notifications on replies! So I love the 2" aps back plate with APS extension on rotory mode👍👍 Such precision! Also, speed 1 is really all ya need. 2 is ehhh sometimes... sometimes needed. But I just love the accuracy!!!!
@@PapaSmurf918Detail Its all good! and thank you for responding...Ive been spending quite some time now trying to learn it's pros and cons
@@1kontrabida Awesome. Yeah definitely! I'm not a huge fan of the trigger to power on. I'd have to say that's my biggest con. Not a huge deal but would love to see em change to something a bit easier. Although you can still modulate it at your own pace. I guess I'm just being slightly picky🤣
If you're into detailing how could you not own one? It has a purpose and plain fun to use. Price? Over 10 years it's $3 a month. 👍🏻
Well said! It's a MUST! Just a great tool for multiple scenarios! Lol 3 dollars a month for 10 years doesn't sound to bad🤣 appreciate you watching Mark!✊️
Also Autogeek, Detailed Image, Autopia, Autoality, Detail World, etc.... has the pixie for around $400. That's just to name a few.
Thanks Larry! 🤙 👍
The atachments come with it to make it longer
I was not aware that it comes with extentions... I don't think the original Kit does though? Unless they have changed it. When I look it up it does not. Either way the extentions are a must 👍👍👍 appreciate you taking the time to watch!
Crocks for the win
You ain't rockin....if you ain't croc'in
@@PapaSmurf918Detail big facts
Great review Brother🤜🤛 Now go & spend some time growing out that beard🧔😂🤣😆😁🤙
Haha! Thanks man! No problem, growing it out I think it's the longest it's been! 🤣
How you doing Smurf? Hope all is well.
Hey Kim 👋 Doing ok. Been ultra busy with the family, weddings, cheer and work! Haha, but we're doing ok! Sorry I've been MIA but, family first!🤙 Have a few cars lined up hopefully making a few videos soon👍 how's everything on your end??
@@PapaSmurf918Detail we are all good. Weather took a turn towards fall this week. Looks like hard freeze tonight, so water outside will be coming to a end in a few weeks. Oh well.......that's Wisconsin for ya.
@@kimnewling5728 Kim, sorry. I don't get notifications on replies to replies for some reason! Ugh... irritating! Sprty to hear as I bet your well into cold now. It's turning cold here as well!
So the 2in on rotary is ok?
Absolutely! It's awesome in 2" rotory mode and works great! 1" it also nice on tight areas. The cone attachment makes an awesome attachment as well!
I just ordered it what pads do you use with the 2in with the rotary and where can you buy the cones for the dremel thing Amazon?
@dillon599 nice! You will love it! So I order my cone accessories from detaildivision.com 👍 Highly recommend the full APS upgrade kit from there. As far as 2" pads I'd check out lake country pads. They are awesome. Rupes as well are great !
@PapaSmurf918Detail hopfully you can use the rupes wool pads for the 2in rotary I bought a couple
@@dillon599 you can, I have some of them👍👍👍
3rd
Podium though brother!✊️🤙
Damn, nice beard.
Appreciate that!👍🤜🤛😎
$800 in Canada 😧
Wow, holy cow. 😲 A great machine though!!!!
1st
BOOM! HES BACK!
@@PapaSmurf918Detail 🤣
@@catguy64 Was he ever gone though?!?!?!!
@@PapaSmurf918Detail always lurking and/or driving causing a 2nd or 3rd. 🤣
Great tip to get the upgrade kit 🤙🧼🇺🇸
Thanks Jamie! It's a must! 🤙✊️ love this thing!!! I think you need one😁😎