The short trumpets won’t give you that low down throttle rumble but they will give a nice sound on top, 20v likes 100mm length trumpets, they hit hard from the bottom straight to the top, the shorter ones give less torque on the low end and the fact that your trumpets are plastic, or that it looks plastic won’t give you that metallic throttle sound, you’re more than welcome to test my 100mm trumpets for a future video if you’re interested, love the content as always
Honestly the best thing for a 20v motor is covered throttles with a proper build induction more healthy for the motor end of the day i really hope u dont end up selling her🙌🏻
There's a youtube channel called sush pants, he has a video where he fitted 50mm,75mm,100mm and the stock ram tubes to his car. He did a canyon run for sound then put the car on the dyno with power figures. Hope this helps💪
Awe Mr LateLate 👆🏽. Fire content by the way. You should go for longer trumpets for a broader sound but I won't lie, the 20V sounds amazing. We need more content on the RSI 🔥🔥
Please can I get a late late customs sticker... for my Tazz.... Your toys look amazing... Love the Runx... But the 20v Rxi takes the pie. Congratulations on the new 20v ma se kind S/O from Jhb... 😊
Shane got a buddy who is going to sell he's and he's wifey car's he got a nice neat bone stock vtec civic and a Toyota 1.6gle both has low mileage on if or jody might be interested he doesn't stay far from you guys
The short trumpets won’t give you that low down throttle rumble but they will give a nice sound on top, 20v likes 100mm length trumpets, they hit hard from the bottom straight to the top, the shorter ones give less torque on the low end and the fact that your trumpets are plastic, or that it looks plastic won’t give you that metallic throttle sound, you’re more than welcome to test my 100mm trumpets for a future video if you’re interested, love the content as always
Will the 100mm fit with the plenum on?
@@LateLateCustoms no sir, I think 50mm is the longest you can go with the plenum on
20VALVE WITH THE SPOON MAGS WOULD LOOK REALLY GREAT.
You know its a good day when the LateLateCustoms notification comes on 😅
Shane becoming a big Toyota guy
Longer throttles makes the car perform better, 75-100mm pull harder and sounds nicer. Just a thought, but happy to see the 20v getting some love❤
Will the 75mm till 100mm lenth Trumpets fit with the plenum on?
@@LateLateCustoms unfortunately not, that's for an open throttle setup
Now that is a proper FULL TANK OF FUEL.
Spoons transformed the look of the car.
The struggle is real to keep it full 😅
@@LateLateCustoms 😂😂😂😂
Patiently waiting for an update on YT
Honestly the best thing for a 20v motor is covered throttles with a proper build induction more healthy for the motor end of the day i really hope u dont end up selling her🙌🏻
I actually covered the ITB's again the same night. Never drove it without the planum
There's a youtube channel called sush pants, he has a video where he fitted 50mm,75mm,100mm and the stock ram tubes to his car. He did a canyon run for sound then put the car on the dyno with power figures. Hope this helps💪
czcams.com/video/oddW4Ecy8m8/video.htmlsi=LcClOnqaPhOUYN7P
Top class video, this is how I chose trumpets for my car😂
@EarlRosendal that man did god's work with that video, I watch it every few months just to remind myself😭😂
@@hereforthecomments1818same here😂😂😂
Leaving the 20v OEM look 😍
20V LOOKS PERFECT ON THE BLADES 🔥🔥🔥
Just look at the YellowThang🥺✨
And finally some 20v content
Glad to see some Toyota stuff on your channel that 20valve looks mal clean👏🙇 and keeping up to your word 6pm is 6pm😅
Always! 😅👏
Car looks realy good bro👌👌👌🇯🇵🇯🇵🇯🇵
Thanks ✌
Hey Shane, I love the new Toyota Content brother.... Maybe I should pull through to Stellies at some point.... 😂
My brother, on the civic please. The 20V is running nice OG rims and is a diamond.
The YT needs some love when are you doing some content on it?
Great video btw👍🏾🔥
We have some big things coming that does not Involve the YT atm but, The YT will get the necessary love In a month or 2
Shane you can turn the original trumpets around it will sound much better
But then I won't be able to close the planum.
@@LateLateCustoms ❤️
My guy here once again delivering some spicy stuff 🔥
Mr late late is back with great content 💯✌🏼
Awe Mr LateLate 👆🏽. Fire content by the way. You should go for longer trumpets for a broader sound but I won't lie, the 20V sounds amazing. We need more content on the RSI 🔥🔥
Hi buddy you guys are DOPE thank you for the videos u making I'm learning alot from it keep it up brother chow chow
Danko 👏
The Runx😍😍😍😍
Hey like it content Shane my thought is day u should fit those spoons on Shannon's car bru u should keep that blades on the 20v
Lekke video mr latelate. We need a update on the blue ballade
Try putting the Rxi rims on the yellow Thang 🔥
Unfortunately won't fit without modifying/alterations
Lets see the rxi with the runx wheel on 🙌🙌
Definitely want to see the look of it
Put it on the 20valve and lower it mr latelate
how about the Maroon car,s rim on the 20v and the spoon on the Maroon car
Please can I get a late late customs sticker... for my Tazz.... Your toys look amazing... Love the Runx... But the 20v Rxi takes the pie. Congratulations on the new 20v ma se kind S/O from Jhb... 😊
I am getting stock end of August and I can hook u up with one
@@LateLateCustoms that will be really awesome bra will remind you come end of August I really appreciate it bro.. Thank you
Awesome video boss👌🏻
How would the spoons look on the 2zz? 4x100pcd🤔
It would look to small in my opinion. For the RunX is has to be 16inch or 17inch
Put the spoons on Shannon's car😎
Which management you running on 20v? Go Std Dicktator 60-2 and a nice tune. 👌 you won't regret it. Motor will respond much more.
Standard ecu. I prefer the standard ecu for the factory precautions
spoons on the civic, keep the blades or go spokes .
Elite Fragrance airfreshners 😊
We need a new batch 😅🤣 These are still in our cars from 18 months ago👏
100 mm trumpets with a 57 mm exhaust by dons performance and down pipe by profit
I made 121kw 176 nm stock standard motor best setup
@wadethebus nice figures,which dyno?
@@EarlRosendal Zeeline performance sir
Not bad at all! I still have a few things to get sorted before doing the exhaust
put it on Shannon's d16 bro😭😭
Car look good mr latelate❤🥰
Spoon goes with Honda sir Honda it is!
Fit the spoons on the 20v leave vtec wheel on honda
Does 80mm trumpets also give that nice low and high sound coz i have 80s on my 20v with exhaust and dictator
You probably referring to the length of the trumpets. Yes it should
What is you turn the original trumpets around facing upwards
The planium unfortunately won't fit and I would like to keep it on.
2:10 fit them on Shanon's car😅
The wheels on shanon's car
She sounds refreshing 🔥🔥
Shannon's civic please
Yo bru, where did you purchase those wheel lug nuts ??
All wheel and Tyre in Goodwood
Bro do you maybe have a 150i motor you selling parts of?????
Unfortunately not at the moment.
20v spoons and lower
The rxi desperately needs mudflaps. Looks very naked without it 😅
I am desperately looking for a set 🤣
I think its better on the honda not the Toyota cos the blades is iconic for that shape
Yey die man is ryk mos hy't n vol tank😂
🤩🔥
Put mudflaps bru car will look much better
I am desperately looking for a set
put the spoons on the honda. keep toyota oem bro.
Shane got a buddy who is going to sell he's and he's wifey car's he got a nice neat bone stock vtec civic and a Toyota 1.6gle both has low mileage on if or jody might be interested he doesn't stay far from you guys
Interested! Please can you share the details for this, thank you!
@@shannonbenting4951hi is it possible that I can give the details to Tyrone Casper
Definitely you can yes👏
Hoe veel jy meneer🤝🤟🫡
Those wheels is a no go on the rxi leave the blades on
U tke ur time to ubload
We create content week by week, that's why
Dope video as per usual👌💯😂
Representing LATELATECUSTOMS out here in Bloemfontein💓🇿🇦🔥👆
Mr late late I think you must leave the plenum off🫣😂
Nahhhh🤣🤣
@LateLateCustoms u have contact for those bold numberplates please