Repair Percussion Massage Gun DDVWU | Replace Old Battery with Wired Power Supply | Cheap DIY FIX
Vložit
- čas přidán 25. 03. 2024
- My percussion massager (DDVWU), though only a few months old, stopped working. It no longer took a charge and refused to power on. I first disassembled the massage gun. All of the PCBs appeared to be functional. Suspecting the battery was to blame, I searched online to find a replacement rechargeable lithium battery pack. Unfortunately, a replacement battery was nearly the price of an entirely brand new massager. As a result, I replaced the battery with a wired power supply. The massager now requires one to plug in a wall wart to an AC outlet, and the gun remains tethered via an electrical wire to the outlet. This is fine for me, though. I won't have to worry about another battery permanently failing. See below parts needed for your project.
Voltage adjustable power supply (3 amp):
amzn.to/3vhSsl6
Consider instead a larger amperage power supply to ensure your unit does not stall with high force applied. Some massagers reach 6+ amps.
12 volt, 7 amp power supply:
amzn.to/3IT1U19
Generic power supplies:
amzn.to/4cq83zw
Percussion massager:
amzn.to/4cvog6F - Auta a dopravní prostředky
Thank you for the video. I thought my batteries were “dead” and considered rebuilding the battery pack, but it seems that somehow the contacts for the battery were dirty. I cleaned them, and we are good to go. I will save your video in case I desire to hardwire in the future. Thanks again.