Video není dostupné.
Omlouváme se.
Ford F-150 2005 Gauge cluster swap - new cluster out of FX-4 - Part 1
Vložit
- čas přidán 12. 05. 2020
- This video explains how to swap your cluster and maintain all functions. It also will update the odometer. I used the Xprog 5.55 device to read the chip.
Update!! Made a part 2. Found issues with this method and made a new video to show you the correct way.
• Ford F-150 2005 Gauge ...
Your hex editor is identical to what I used to produce(except in a paper printout) when debugging Assembler programs back in the 1980's. All of the double FF bits are high values. A "1C" is a packed positive number 1. If the C was replaced with a D, it would be a negative 1. The decimal number is unpacked it appears as an "F1".
I just did this 06 F150 XL plain jane cluster to an 08 FX4 cluster. Used ForSCAN and my AS Built data and it worked perfectly. It was easy.
Right on. I like hearing different ways to get this done. I did it my way because I had the xprog box already. Also I could not find any good procedures for doing this without high cost or begging a dealer for help. Thanks again for sharing.
@@josephhuwe9720 No trouble, be well.
Wow that was Kool to look at. I only wish I could send you a tac like the one you did and do it for me. Well many I can get someone at Ford to do it. Thanks for the knowledge.
How much would you charge me to take the data from old cluster to a Lariat one that I got
Nice job 👌 buddy
Thanks
do you have a diagram of the xprog connections, very fast camera movement and couldn't see them
I will put something together for you when I get home from work.
I want to do this to my truck but I hate electronics with a passion. Using them that is. So could I just have the dealer fix it if I have any issues?
Hello sir i am trying to get the same thing on my 2004 ford f150 XL. If i buy the FX4 Cluster ship it to you, can you program it and have it ready and perfect so i can just plug it back in a be all set!? Ill pay for the whole process!
How much would you charge to programed and ready to go on a 05 f150
Hey Carlos. I don’t know. I never thought about providing this as a service. If you think shipping both those consuls to me and back would be cheaper then a 50 dollar xprog box I would be willing to help you out.
@@josephhuwe9720 awesome I would really like to purchase new gauges don’t like the boring ones once I purchase I’ll be willing to pay shipping both ways and for your service
@@josephhuwe9720
tiradocarlos13 @gmail.com
I did the swap on my 07 xlt but my ac wouldn’t work any ideas anyone had this problem
Use forscan with liscense
How much you charge me to do one for me
I have a 2007 ford STX. I took a lariat gague cluster out of another ford truck at a junkyard and when I put it in, my AC stopped blowing cold, I put my stock dash back in (which doesn't have a tach, thus reason why I got the lariat cluster) and AC started blowing cold again. Do I have to do what you did in this video to get it working? I seen you said there's multiple parts to the video? Please help🙏
Yea man our 07 up f150 are canbuss enabled meaning there are data wires running to the bcm and various components in the vehicle. My old lady had a malibu and I pulled the stock stereo out and drove to the store to get a part for the stereo and the entire dash was off and had no reading from the ac controls or anything so I assume that's your problem because my alarm on my 07 has been a pain to figure out and wire into the bcm the way I want to.
I put a FX4 cluster in my 2005 XLT. I have manual heater control. My AC stopped working. But when I put my original cluster back on it works fine. Is there a way to fix this.?? I don't like the oem boring cluster
Also the low tire light is always on my truck did not have tire sensors
Yeah if you watch both part 1 and and part 2 of my videos and follow what i did it will correct all those issues. I had the same problem before I reprogrammed the new cluster. Also it will correctly display your trucks mileage after.
So if I have an xlt what all would I have to do to it? Considering I already have a tach. I'm able to buy an fx4 cluster right now but idk what all I need to do to get it working
If I were you and you wanted to make the change I would watch part 2 of this video. You don’t need to edit line AF0 but if you follow the rest of the steps I n part 2 you will get accurate mileage.
so I have a xlt too, have a lariat cluster, where can I get this type of work done on the odometer.
I don't really know. I have seen things on eBay. Someone says they can program it and you mail it to each other. I wanted to do it myself so I never looked to hard in to having a shop do it. I figured it would cost to much.
Could I create an eeprom programmer with an arduino, if so, how would I program the arduino? All the eeprom programmer videos I see use a lot more than just the 4 pins that are used in this video and I was wondering how I could get it to work. Would it be similar to how those programmers work?
Sorry about the late reply. I don’t check this often. The BDM connection supplies power and a 2 way data path to the microcontroller they use for the cluster. In my video I am simply doing a hex dump. If you have another means of performing this without the Xprog box, I say good work friend. I originally searched CZcams myself for people using the BDM connector and found a guy who explained it’s use well, but he used a different device.
Where did you get the chip to reprogram?
I am reprogramming the built in chip on the cluster.
@@josephhuwe9720 The XProg chip to reprogram, I have a different cluster and need it reprogrammed that's why. Do You have a Business?
No I don’t. I just wanted a tachometer on my truck. I also like messing around with electronics. I posted what I did to save the days of work for someone else. I would have to figure out whatever you have to help you. Sorry friend.
@@josephhuwe9720 It's No problem... I wanted a swap but I figured You're from Oregon due to Location on the channel and I'm from Texas. Thanks for Responding, I need a reprogram as well from an XLT Cluster to a STX Really Appreciate it.
@@josephhuwe9720 this be the device?www.amazon.com/dp/B088WY4GJ5/ref=cm_sw_r_cp_apa_i_e2UxFbF4FC9D9
What would you charge to do mine. It's a 05 Ford f150
Hey Tommy, I’m sorry but I don’t offer this as a service. I simply wanted to share what I did in hopes it would help others who are trying to do the same thing.
What so howd you get rhe ac going?
I don't know what you mean. Can you explain?