I hope you enjoy this video. If you would like to support my projects: PATREON: www.patreon.com/ELECTRONOOBS Any question just use this comment section or my Q&A forum: www.electronoobs.com/eng_preguntas.php
@@stephen0tan I found the Eleksmaker now with a really good discount on Banggood: www.banggood.com/nl/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?p=7I22079633188201703T
Hola amigo, Tengo entendido que estas gafas protegen de los reflejos que se puedan producir en la avitación donde está el láser, como paredes, etc. Peró no te protegen si miras directamente el corte. Hay que tener en cuenta que una parte de la luz és infrarroja y no es visible. Yo también estoy haciendo una un poco más grande, de 60w Co2, y la idea es hacerla completamente cerrada con una cámara dentro y un pequeño monitor fuera... Saludos desde Catalunya
We use a 15W laser and a little smaller CNC system to rework panels. Unfortunately it is fixed focus and had to be modified to get the laser the required space from the surface. We got the same glasses but don’t trust them that much too. The laser powered on when I plugged the USB cable in and burned a hole in the desk !! This laser is nice a powerful but without laser focus ability it makes it a challenge to use.
Thanks for the video! I would really like to see what this laser could do with with a good hardwood instead of cheap plywood. I am thinking of buying this engraver and if I do I will reinforce all the plastic pieces with washers at each screw hole to distribute the stress as well as install corner brackets!
I hsve the same problem with elekscam. Manual movment and when you engrave no movement. This is a bug in the software. Make sure that your Windows have the Region. Englisch united states and it will work
I,m building a laser cutter right now with a Elekmaker laser. Where do you buy the blue metal holder block at 4:53 in the video? I can't seem to find it anywhere.
Hey great video. I'd like to build a similar cnc machine. What sort of aluminium extrusions are being used here. And do you know where I could get the roller wheels. I keep searching but I don't know the proper name for them and so I don't get the correct search results. Many thanks
Really nice, man. :) Is that banana a reference to Peter Sripol? LOL He has a HUGE laser cnc machine that he uses to cut foam, to make his rc airplanes. :D
Hahah you sound like the rest of us mate " I want a cnc and laser cutter" wah wah wah ;) well that's what the wife thinks I sound like. Very nice video mate - thanks for sharing and all the best for your future projects. Cheers Jim
Hi i have same machine just assembled it ..worked for 5 min but now wont move at all in y or x ...in benbox when i hit the manual move buttons a light flashes on main board somit seemms its getting signal from software but stepper motorscwont power on.....i can manually turn on laser...any ideas why steppers seem dead or no signal?
Hi Im looking to add a drill like you mentioned 11:05 of the video. Whats it called? I've been trying to find one in a google search but have come up with nothing.
Hello Friend, I need your help, please. I've just purchased a 2.5w laser module and want to replace my .5W laser module but the 2.5W laser doesn't switch on. I have a similar machine and motherboard to the one you have assemble in this Video. Any help will be much appreciated. Thank you, Randy
good build description,good enough kit for a 2 axis laser,safety features are lacking a big carboard box might help more than the glasses(not being funny),or a 6mm plywood box with interlock micro-switches to cut power to the stepper driver board,super simple and the arduino nano can still accept the CAM files,most of these things need a bit of tweaking to make the thing you REALLY want it to be,a 3 axis might be more than it can support(flex/deflection of the axis support beams,though you could rebuild it with larger gauge box section. I want one,though i think my own build will get exactly what i want/need. Great vid,like with a BIG thumbs up dude.
Hello , i have Eleksmaker A3 pro ,do i need to calibrate the machine? I have installed the program, I choοse the COM and the machine. , what do button set home and home? I can move the laser manually, but when I select the photo while it shows to the computer that it reads the design it does not move the laser at all. Could you help me? Thank you
I found the Eleksmaker now with a really good discount on Banggood: www.banggood.com/nl/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?p=7I22079633188201703T
Před 3 lety
Those glasses are the minimum required. You should get better glasses. the orange ones.
Not the best product but the design is super simple. I might make myself one of those based on this design but different as some of those parts are hard to find here locally or are too expensive even from china.
By the way it's not 2,5W laser ..they are pretty all over the place. Mine measures only 900mW light output >..< EleksMaker needs to make something with their QC or stop lying about their products. Also you used the nuts on the swrews completely wrong way - they are supposed to grip into the acrylic ;)
Hey what's going on buddy I was wondering if you can help me I have the same type of engraving machine I put it all together I have two different lasers but for some reason and nothing works it does nothing it doesn't move I don't know what I'm doing wrong I need help if you can email me or do something to help me I would really appreciate it
There's a elekscam auto fix tool, install and it will work wiki.eleksmaker.com/doku.php?id=elekscam at the bottom of the site. Or it doesn' t work because the weak light is still on
I wonder why the makers of theses machines can't add in instruction manual with the machine. It pissed me off. I have a different one that looks similar and I don't know the model number. S.o. b. Come on man. Bad review from the start.
wanted to share +Marco Reps video on upgrades to this machine. with a few changes this cnc looks to perform very well. czcams.com/video/ZzO9skEYqwY/video.html
Axel Werner Well the machine is quite simple. Its not like you cannot buy the components separately and build something similar yourself. The angle brakets could easily be 3D printed and the rest bought or replaced. An arduino uno + cnc shield could easily replace the main board.
The company that helps my workshop shouldn't bother you. I show you the machine and I really wanted this one for my future projects. If you want to buy it using any other shop is your choice. If you are not here for my videos, I'm very, very sorry to hear that. Have a nice day.
I hope you enjoy this video. If you would like to support my projects: PATREON: www.patreon.com/ELECTRONOOBS
Any question just use this comment section or my Q&A forum: www.electronoobs.com/eng_preguntas.php
Do you think I could make a pick and place machine using this?
I would like to know if it can cut papers and how close to perfection
how can you mount a cutter head on it?
hi, my one got laser , but dont have engrave .. anything can help?
@@stephen0tan I found the Eleksmaker now with a really good discount on Banggood: www.banggood.com/nl/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?p=7I22079633188201703T
Hello Sir your video is amazing I just bought one of this machine and I need to ask you where I can get the drill tool accesorie??
BUGFIX at 7:18
Bugfix for the original EleksCAM software change the number format - decimal point from , to .
Andre Muensti wow. That's the bug? I'll try it! Thanks
Where do I need to change what exactly to fix the bug?
Hola amigo,
Tengo entendido que estas gafas protegen de los reflejos que se puedan producir en la avitación donde está el láser, como paredes, etc. Peró no te protegen si miras directamente el corte. Hay que tener en cuenta que una parte de la luz és infrarroja y no es visible.
Yo también estoy haciendo una un poco más grande, de 60w Co2, y la idea es hacerla completamente cerrada con una cámara dentro y un pequeño monitor fuera...
Saludos desde Catalunya
We use a 15W laser and a little smaller CNC system to rework panels. Unfortunately it is fixed focus and had to be modified to get the laser the required space from the surface. We got the same glasses but don’t trust them that much too. The laser powered on when I plugged the USB cable in and burned a hole in the desk !! This laser is nice a powerful but without laser focus ability it makes it a challenge to use.
It is a nice machine I have no major problem with it, very precise
This guy is a banana salesman I always look for it on his show and it's reliably there
Did you ever manage to etch a PCB? I’m interested to see your results! Thanks in advance!
Hola, buenisimo el video, se ve que eres profesional.
Cual es la resolucion del aparato? Gracias , Sergio
Thanks for the video! I would really like to see what this laser could do with with a good hardwood instead of cheap plywood. I am thinking of buying this engraver and if I do I will reinforce all the plastic pieces with washers at each screw hole to distribute the stress as well as install corner brackets!
Nice video, the first one that do the steps one by one,
Congratulations for the video man! What exactly can we do with this laser (2.5w)? Did you already record a video about it?
How do you like the machine as of now? Is the dual steppers on the y axis giving you any trouble?
Cool, but i plan to buy the first price co2 laser cnc laser cutter for arround 350 euros instead, because i think cutting is more usefull.
I wanted that but is 350 for USA. For Spain with shipping and all is almost 1500 :( and I don't have that yet.
Nice video,I waiting for next video in pcb engraving & converting pcb milling machine.
Keep up love your content
Looks neat!
Thank you!
Hi Electronoobs, I'm so interested with the roller and the aluminum bar. May I know where did you purchased it?
I appreciate u r thinking.... by keeping fruit...
Hello, Just wondering if you've tried to laser any plastics to see if they mark or melt?
Greetings, I am wondering if you every tried adding the little drill attachment you showed? Are there addon plans to be able to add that? Thanks!
what about PCB label engraving. Can you write text on PCBs to mark where which components needs to be placed?
You have to put a 10k Pulldown Resistor to the pwm signal pin of the Arduino, so it won't turn on by itself when you connect it to your pc
you tested this? sounds like a good idea
@@EpicSqu1rrel Yes and it works like a charm
love the banana for scale !
Can it engrave on metal?
does this machine also work on marking on metals like brass, steel ,etc
you can make plastic smt stencils with this laser cuter
I hsve the same problem with elekscam. Manual movment and when you engrave no movement. This is a bug in the software.
Make sure that your Windows have the Region. Englisch united states and it will work
Please sir contact number
Hello
Can the laser be installed instead of the engine in the CNC 3040 4 axis Router.
Is the electronic circuit has a place to install a laser cable.
I,m building a laser cutter right now with a Elekmaker laser. Where do you buy the blue metal holder block at 4:53 in the video? I can't seem to find it anywhere.
How well was the banana engraved?
Hey great video. I'd like to build a similar cnc machine. What sort of aluminium extrusions are being used here. And do you know where I could get the roller wheels. I keep searching but I don't know the proper name for them and so I don't get the correct search results. Many thanks
www.ebay.com/itm/Bearing-V-Slot-Plastic-Wheel-Roller-Pom-Ball-Nylon-Glass-Series-Cnc-Gear-Perlin/253317733067?epid=26011565454&hash=item3afae9dacb:m:mA2FJpWqfKaCP-RTXRYYnSQ
Really nice, man. :) Is that banana a reference to Peter Sripol? LOL He has a HUGE laser cnc machine that he uses to cut foam, to make his rc airplanes. :D
Banana is just for scale LOL
But how do we know the scale of the banana?!! haha😂
Kkkkkkkkk
The banana is in the SI unit of scale. LOL
Electronoobs hahaha!
Hahah you sound like the rest of us mate " I want a cnc and laser cutter" wah wah wah ;) well that's what the wife thinks I sound like. Very nice video mate - thanks for sharing and all the best for your future projects.
Cheers
Jim
dear, more information: Sanhesince2007@outlook.com
WhatsApp / WeChat:+86 15729393963
Hi!
I Have macbook pro, I can plug in and work with WebLaser, BUT I have some problems with specs, can u try to use with Software WebLaser?
Thanks!!
Hi
Where is the link for the manual?
Thanks.
Good video
So, were you ever able to use it for PC boards? You never did another video on it....did it end up sucking?
can it cut through acrylic?
so it can't cut? what kind of Affordable laser cutting CNC?
Hi i have same machine just assembled it ..worked for 5 min but now wont move at all in y or x ...in benbox when i hit the manual move buttons a light flashes on main board somit seemms its getting signal from software but stepper motorscwont power on.....i can manually turn on laser...any ideas why steppers seem dead or no signal?
Hi, I bought a knockoff EleksLaser. - how do tell if it runs GRBL or Benbox? the PCB looks very similar to elekslaser's
Hi, I am thinking to use this machine to engrave serial numbers to a made commercial PCB boards, have you tried it before ? thanks
i have this machine too, can you guide me to proper setting for benbox software for engrave wood,
Can we use this to make bubblegram?
Can you cut balsa wood and sunboard
Does it cut wood?
Hi Im looking to add a drill like you mentioned 11:05 of the video. Whats it called? I've been trying to find one in a google search but have come up with nothing.
hello brother, for the application of the laser engraving machine, because mine has an error
Thanks
how to replace a laser with a drill...please
Danger Will Robinson, Danger...
We can do thermocol cutting machine from this machine
Can I use this machine as a stamp rubber engraving ? If I use the appropriate settings can I make good quality stamps ? Thanks,,
dear, more information: Sanhesince2007@outlook.com
WhatsApp / WeChat:+86 15729393963
Hello Friend,
I need your help, please.
I've just purchased a 2.5w laser module and want to replace my .5W laser module but the 2.5W laser doesn't switch on.
I have a similar machine and motherboard to the one you have assemble in this Video.
Any help will be much appreciated.
Thank you,
Randy
good build description,good enough kit for a 2 axis laser,safety features are lacking a big carboard box might help more than the glasses(not being funny),or a 6mm plywood box with interlock micro-switches to cut power to the stepper driver board,super simple and the arduino nano can still accept the CAM files,most of these things need a bit of tweaking to make the thing you REALLY want it to be,a 3 axis might be more than it can support(flex/deflection of the axis support beams,though you could rebuild it with larger gauge box section.
I want one,though i think my own build will get exactly what i want/need.
Great vid,like with a BIG thumbs up dude.
Hi sir...I am also making this machine as my final year project...is the firmware already exist in benbox or we have to write it ourselves???
Hello , i have Eleksmaker A3 pro ,do i need to calibrate the machine? I have installed the program, I choοse the COM and the machine.
, what do button set home and home?
I can move the laser manually, but when I select the photo while it shows to the computer that it reads the design it does not move the laser at all.
Could you help me?
Thank you
NIKOS: I had the same issue, it was resolved by changing the decimal point in Windows. It has to be . and not , so us standard
NIKOS: I had the same issue, it was resolved by changing the decimal point in Windows. It has to be . and not , so us standard
Good morning is this cash on deliver
Hey what's the difference between the 300mw to the 500mw
200mw
Looks Nice
where to buy the drill bit?
hey does it engrave the glass? and able to cut it ?
No. Power is too low and you need a different wavelength to cut transparent materials...
@@ELECTRONOOBS Ohh okay, thanks for your answer.
How long you need to engrave that logo ??
Can you please tell me if you try to cut plywood 4mm?
dear, more information: Sanhesince2007@outlook.com
WhatsApp / WeChat:+86 15729393963
I want to burn logos onto leather. What laser should i use?
Noa Gomez I have a 3 watt Insma engraver and it does leather really well. Usually anything over 2 watts would reliably do the trick.
can you increase the size of the "print area" to 20 inch x 30 inch? i want to cut airplane design from flitetest
Very good video and damn you are good looking!
can the 2500mw version actually cut wood/thin acrylic sheets?
No
hey buddy,
does this lazer goes through metal ?
No way!
@@ELECTRONOOBS but it draw on it?
Qué pasó con el canal en español?
Respect lasers or be blinded. Guaranteed.
I found the Eleksmaker now with a really good discount on Banggood: www.banggood.com/nl/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?p=7I22079633188201703T
Those glasses are the minimum required. You should get better glasses. the orange ones.
can we cut leather or fabric?
It cuts very thin fabric. Won't cut leather, only engrave it! Maybe passing the laser multiple times..
Thanks for the answer
question why is there a banana just sitting there?
Price
Not the best product but the design is super simple. I might make myself one of those based on this design but different as some of those parts are hard to find here locally or are too expensive even from china.
I bet is more fun to make your own! Keep up!
O wow
What the Banana for ?
By the way it's not 2,5W laser ..they are pretty all over the place.
Mine measures only 900mW light output >..< EleksMaker needs to make something with their QC or stop lying about their products.
Also you used the nuts on the swrews completely wrong way - they are supposed to grip into the acrylic ;)
Wow, I didn't knew that. :(
Hey what's going on buddy I was wondering if you can help me I have the same type of engraving machine I put it all together I have two different lasers but for some reason and nothing works it does nothing it doesn't move I don't know what I'm doing wrong I need help if you can email me or do something to help me I would really appreciate it
Don't apply filter on videos it makes video look bad
Hello Freud
Podria hacerle una
Consulta en español.
Gracias por su atencion
Omar Panels dime
Buzco como poner un laser de mayor potencia. Pero quería consultarle.
Gracias saludos
If the software provided with the machine doesn't work ,I wouldn't buy the machine
Engrave a disco ball!
Como hacer funcionar
I need rubberLaser engraving machine keet size 600mm*900mm
Ho is Indin distbuter in India
hi friend , we are a factory of laser engraving machine , we have 9060 laser cutter , if you still need it , pls contact whatsapp 086 13294119385
you know there is way beter software for that system then he one it comes with
Check out laserweb converted mine to wifi connection
There's a elekscam auto fix tool, install and it will work wiki.eleksmaker.com/doku.php?id=elekscam at the bottom of the site. Or it doesn' t work because the weak light is still on
Can we engrave clothes by this machine
is there anyway that I can download the software on my mac?
I have the smaller one. Will you PLEASE tell me WHY you have a banana in all your videos???????
Nice ☺
Make a arduino self balancing robot...
Please make it
hi bro can you send me its animation video and detailed drawing of this project
I wonder why the makers of theses machines can't add in instruction manual with the machine. It pissed me off. I have a different one that looks similar and I don't know the model number. S.o. b. Come on man. Bad review from the start.
Why bananas 😂
Karim Bab I'm guessing for size comparison?
wanted to share +Marco Reps video on upgrades to this machine. with a few changes this cnc looks to perform very well. czcams.com/video/ZzO9skEYqwY/video.html
Yes, nice upgrades!
Can engrave my photo
Lolz
Again bangood Advertisement?!? Guess I need to unsubscribe then. I'm not here for Teleshopping
Axel Werner
Well the machine is quite simple. Its not like you cannot buy the components separately and build something similar yourself. The angle brakets could easily be 3D printed and the rest bought or replaced. An arduino uno + cnc shield could easily replace the main board.
That's true. The first machine you see in the video, the red one is homemade.
The company that helps my workshop shouldn't bother you. I show you the machine and I really wanted this one for my future projects. If you want to buy it using any other shop is your choice. If you are not here for my videos, I'm very, very sorry to hear that.
Have a nice day.