Video

You should not have water in the lower unit EVER. If you do you have a bad seal somewhere

Thank you for this video. Like many others here, you saved me hundreds of dollars.

Thank you, this was very helpful

i've a question... why the tube have some black or brown residue... and do i need to replace them ?!

Was about to replace the oven at $1700. Spent $16 to fix it. THANKS!!!

Great vidéo

Thank you so much for this video! I was able to save $1000 (at least) by replacing a cracked wet end myself. Spa place wanted $700 for a new pump and $120/hr. labor. I fixed the problem with a $75 wet end and $30 of tools. The hardest part was getting the size right.

I've been an appliance tech for 12 years. I finally started my own business 3 years ago. One of the many perks I enjoy being my own boss is I never have to work on those piece of crap Whirlpool, and Kitchenaide combo oven and microwaves again. They are over engineered and the microwave does not conform to the normal diagnosis used on OTR units. I encourage other techs to follow my lead so Whirlpool just might stop making them....., or at least redesign them like GE which rarely fails, and when it does, it's much easier to diagnose.as it's basically a separate microwave mounted above the oven then just the control board is separate instead of Whirlpool that often has 5 frichen control boards and that one fuse that's buried on the right interior. WHY bury a fuse that deep??? OK. rant over.

100 inch lbs converts to, 8.3 foot lbs… Torque Spec for the lower gear oil drain. Google is your friend.

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Windshield for your 2016 Kawasaki Teryx 800 4

Nice video. I have the exact same year and OB as you though I keep my boat in the water 6 months of the year. I was told that when you use the flush port, the engine should be off and does not matter if the engine is down (out of the water) or up, when the boat is in the water. And was told by Mercury that the engine does not have to be warm to flush (when using the flush port). Though if using motor muffs, then the engine would need to be started. Just curious, did you receive different guidance? Thanks

Sponsored by Hellmann’s 😂

Thanks for posting. I just did my oil on my 200HP merc. For the lower unit, is it a different adaptor for the pump to replace the gear oil? I will be doing this part tomorrow.

i am going to check the fuse right now we lost power and when it came back on our oven didnt work like yours but the control panel was very very hot to touch could this be the issue as well

thanks for the video but why is the intro very loud

Thanks for posting. Easy to follow and eased my anxiety doing both. I couldn’t find anything on our engines, everything was a ProXS or Verado Planning on doing one for LP fuel filter and impeller? 😉

Is there one with a bench seat instead of a center console

thanks. great video

It looks like your MW unit is separate from the oven unit. Ours is one unit.

My oven went out 2 days ago. Watched your video and ordered a part for my Whirlpool oven (model# WOS51ECOASO4) and it showed up in 24 hours. I put it on and I`m back in business. Thanks a lot for saving me several hundred $$$. You`re the MAN!! Part cost me 21 dollars on Amazon.

Where does the cable go?

Thor…your video has been very helpful deciding on what to purchase. There are so many options available. My concern was to have them up tight to the rockers. This rebel is my wife’s truck and she is worried about slipping on the board. Can you comment on this plz ? Another question is if they have a lot of flex ? Thanks for making this video !

I am getting error codes on my microwave and read a comment from a technician that makes total sense - he said that If the door switches are not functioning no other repair you make will prove to be effective. To this point, i suspect that my problem is my actuator switch - there are two small black buttons on the inside frame of the microwave door that get activated when the door is closed. The switch on the left side of my microwave can easily be pushed in with your finger, however, that is not the case for the button on the right hand side. Would you be so kind and tell me if both of your switches are easily be pressed in with your finger? If so then its only a matter of reconnecting this piece and mkg sure that the little spring is attached. There are several videos that show how to do this. Just hoping you can save me a lot of effort tearing apart this microwave! Thanks in advance!

So dirty the floour meabe a sweep will be fine, the brooms are cheep, i realy would not like to work like that

That sounds amazing

Just ordered mine for my 2022!

Promo'SM 💞

Hello I hope everything is good with you. I looked into your CZcams channel and discovered that it has certain issues. To improve views, subscribers, and even revenue, you could customize your channel. Your channel will rank quickly and gain popularity if it is slightly optimized and the videos are search engine optimized. You have a very low (0/100) channel SEO score. Would you like to make changes? I'm awaiting your answer. I hope you have a pleasant day. Regards and gratitude Yousub Ali

I just got this and it drones around 1800 with acceleration pretty bad. It’s loud as hell inside compared to what I’ve had in the past.

Do you have a video on replacing the microwave drive motor? Ive looked down into the hole where the drive motor shaft is supposed to be and there is nothing. Looks like I'll need to disassemble the using

On my 2nd Ram Rebel and I would say Best Truck Ever!!!!

Best Truck! Hands Down.

i just got a used 2021 rebel night edition. love the full sunroof got the auto steps. no ram boxes. i actually do not like the 4x4 auto. im allways in 2x4. rarely use 4 hi. i actually thunk my back seats are nit heated i now have to double check lol

I had already called the repairmen at G&G appliance repair when I spotted this video. Fortunately, G&G in their incompetence, had forgotten to dispatch anyone so I ordered the fuse from Amazon and repaired my Whirlpool oven myself following this terrific video. The oven works great!! Interesting that reading the various factory manuals and calling the manufacturer as well didn't provide this simple fix. Thor Repairs is wonderful

I don't see a fuse like this behind the panel

Hey i have the same pump system i believe and that seal is leaking.... where do i find an impeller if mine breaks well taking it off like what happened to yours? Thanks

The breaking is the worst. Every time it goes off I think I hit something and have to change my shorts.

Thanks for the video. I have a 17 year old Frigidaire wall oven. It has power, but neither the broiler or bake element work. Following your video, I removed the thermal fuse and used a "Continuity tester" to test the fuse. The light lit up, so presumably the fuse is not the problem (I think). Any ideas what to do next?

Right on thanks !

Quick question. How hot does your pump get when it’s running? I have the exact same pump. I’ve replaced the impeller and seal (due to it leaking). It now runs nice but when I touch the motor body it’s red hot. Should it run that hot? Any help is appreciated

Not sure if you use the self cleaning mode... I learned the hard way, I will never use the cleaning mode ever again, it cooks the control panel... hello easy off oven heavy duty oven cleaner, it works great and saves your oven

Thanks, Thor, for this video, you just saved me around $2500 for a replacement oven. Replaced the bad thermal fuse for $20. You da man.

Thanks 👍

PEX degrades with UV exposure. Have you had any issues over the past 2 years?

Is the mount grounded anywhere?

Just got me a 2022 1500 , exhaust manifold was clicking, hope to get it fixed next week to hear this beautiful sound

What is that black box the J mount is screwed to?

I have a '22 Laramie 5.7L and put a MagnaFlow 19430 - CatBack exhaust with a K&N cold air intake and O-O-OMG! It sounds fricking amazing!

Thanks men for showing step by step, u saved me a bunch

Today is June 29, 2023 and if you happen to live in Ontario, Canada you have been experiencing the massive amounts of smoke in the air this month from the forest fires in Quebec and Northern Ontario travelling and lingering all over our province this month. Please be sure to CLEAN YOUR AIR FILTERS on your Air Exchange Unit, or replace them if you can't clean them. If you happen to live in say a High Rise apartment building you're kind of at the mercy of the buildings maintenance personnel for this. Hopefully they will change or clean the filters in your building once all this smoke clears. If you have home-type air purifiers, you might want to clean or change those more often to clear any of them of any gases, ash, or dust they've filtered out of the air for you. PEACE to all and a big thank you to @ThorRepairs for providing us with this extremely helpful video