Video

July 4th took my stoeger apart surprise I got it back together right

Yeah cool I took my stoeger p3000 apart first time this my 2nd year having it my winchester never took apart

I bought mine last summer. Bare stainless slide, 2 mags, SigLites, case and papers: $425 OTD. Love it as a companion for my P239. I put a SMALL grip module and a 'short reach trigger' on it. It is part of my vehicle's GHB kit.

Frame 1:40+: Shoot 'high thumb' and bring your support hand up higher for better control and a decrease in muzzle rise.

I was getting about 2 MOA out of ball ammo, was going to sell it. Just for grins I tried Rem Core locked and got Sub MOA. Now it is my hog gun.

There is so much sand in the chamber. No shit you hand packed it in there. Anything will fail if you go out of your way to make it fail. Next test, wet cement

I have a fnx fn 40 that shoots low with 180 grain but great with 165 just something i don't understand why can someone help

That's polish army helmet broooo wz67

I got one n I love it

Why are the SP2022's mags parkerized, INSIDE and out?

Buddy damn near or did flash camera man head right after loading it 3:23-4

My 716 is a tank. I've never had a feed or extraction failure. When it's time to clean, I'm always struck with the thought, "Did I shoot this gun?" Gotta love the piston system.

first of all your dumb for putting a 30rd mag in instead of a 10 or 20 and second your running the bolt way to hard and going way too fast and your trying lots of different mags.

I wasted to much time of my life tryna watch this I can never get back

9e is mostly ambi soils out of the box, can’t beat the price if you can find one , have both use the ruger more

This retard shouldn’t be allowed anywhere near a firearm or allowed to own one.

Just picked up a used TC venture with weather guard 7MM08 scoped it out with a 3-9 and it kept group with my Tikka 300win at 100 yards with almost no recoil. Extremely happy with it. My new WT gun hands down, Trigger is basically a hair looooove it.

Yeah I think you left out a small little detail.

Definitely not 200 yard....So two football fields huh? Bs

Not all magazines are created equal and not all ammo is created equal guy. Nothing is wrong with the gun. Find a set of mags and ammo that works best with the gun and go with it. Where is the mag that came with the gun?

I have had high-end guns that were garbage and had budget guns that work well clean them polish feed ramp and should not have a problem

I have the 16" Patrol version and have installed a Rock River 2-stage trigger and 4-12x Nikon. It shoots sub-moa with almost every handload. I would try shooting off of a good rest instead of the bipod as an experiment. If I was hauling a rifle up/down mountains, would not use this. I just walk to a tree stand and go up. The weight does dampen any shakes.

Just change out the recoil spring with a Glock Gen. 3 one...

I got a 9E the only Ruger I’ve ever bought I regret buying. Right out of the box FTF sent it to Ruger still same problem. Then I got some advice to leave the mag loaded out of the gun of course lock the slide back and let it sit for 3 to five days. Ran fine after that

Caldwell makes an good and affordable bipod, it’s called the AR bipod.

I love the older Sig guns, the 556 commando, and this 716 gas piston.

I have the same 223 short action bull barrel, mine is 24in . I'm shooting 68gr 1/2moa. I've also had it out to 800 yards. Rings 10x10 steel at 800 all day. What a shooter for the money !! Glad to see others with the same experience.

Mine has run perfectly. The first thing i did was break it down and remove any visible oil or lubrication I could find. Polished the feed ramp and chamber for 3 minutes with Mothers wheel polish. Reassembled it DRY!!! and worked the slide well over 200 times dried fired a couple of dozen times dropped the mag and reinserted a few dozen times. Broke it down again and sprayed the internals and rails with CRC powerlube aka aerosol teflon. Reassembled again and racked the slide back and left it like that in the gun safe for 3 weeks. It may only loosen the recoil spring pressure up a few thousandths a British SAS officer showed me how to prep a handgun for the desert in 2006. All my guns have run flawlessly using his input.

I have wanted one of these for years. Hopefully I will find one at the right time/place.

Best platform (SIG P-Series), best caliber. Call it a day.

There's combat induced malfunction & there's civilian sabotaged 🤣. Supposed to pour some blood in there.

the seat is way to small its not what thy tell you

Excelente video...

I trust The Beretta a lot more than any 1911.

is there any way to remove magazine follower plastic cap and replace it with phase 5 12 gauge?

I have a yugo SKS from the 50's. I have never fired it and it doesn't look like it ever has been... It's a beautiful piece. Where would you suggest I try to sell it? I'm forced to sell off my collection.

Ruger SR-Series Instruction Manual p:20 CAUTION: Dry firing your RUGER® SR-SERIES with the magazine removed may result in damage or unnecessary wear to the magazine disconnect mechanism and/or striker. NOTE: When dry firing the SR-SERIES pistols, the trigger will not automatically move forward to reset. The slide must be retracted at least 1/2” to reset the trigger and firing mechanism.

Just got a 9e at local pawn shop. What's a good site for mags? Cheaper than dirt has the cheaper ones ive seen. Blue steel forn19 $ is that a good deal now?

You in az or north Dakota? Just guesing lol

He just doesn’t know how to use a gun

Timney trigger

Do they have a bullpup version of this baby girl yet sweetheart???? Because when I held my friends at the range it just felt so front heavy and he didn't have the bipod or can on it!!! However a scope.

Only took 50 rounds to break mine in... Functioning flawlessly after 200+ rounds. Perhaps they improved the newer ones.

Why do you not like the magazine disconnect? Coming in with next to no knowledge.

I just bought this pistol in the Recon model! PSA had then on clearance for $200…I figured there’s a reason why it was so cheap! I don’t mind refining them to work if there’s issues! I definitely wouldn’t have bought it for $350 …like you said the Canik is a better gun at that price range! Seems to be hit and miss as far as reliability with the FMK….time will tell with mine!

I love my SAR K2P, never had an issue, sights right on out of the box, fits my hand like a glove and I bought it on-line, sight unseen. I re-did my sights with glow paint. My EDC.

Fast forward 5 years and they can’t give this gun away for $200. 😂

I own a Thompson Venture 2 308. Sub-MOA 100 Yards. .75" to .90" multiple different types of ammo. It Hated Fusion ammo. WOW. 2" at best

Dude all the people talking smack is astonishing….. I have this rifle also and it jams really bad. It’s NOT because of the way he it running it!!!!! It’s the design and the sloppy assembly at the factory. So those 2 things combined make a POS bolt gun. This rifle has the strangest bolt face design I have ever seen. But it has to be that way to strip the cartridges off a AR style mag. As for the build quality I say it’s garbage because 1 the M4 feed ramps on mine were half way done. One side was halfway cut and the left side not done at all. 2 the mag well is extremely lose so the mags will wobble all over the place. Honestly on a magpul gen 3 mag I have 3/4” play back and forth. I just find it hilarious all the know it alls on this man’s video telling him it’s him and not the rifle. Smh tells me A LOT about some of the people in the comments section of YT

excellent job.... subscribed@!@@!