Video

Hi, Deborah. Very sorry to hear that yours are not working the way you want. I wonder if the camera settings need to be adjusted. I had to go into each of mine and turn up the motion sensitivity, the recording length, eliminate the privacy/motion limiting zones if they had previously been set, etc... After I did that, they have been working very well for us. Maybe you already tried that, but just throwing a few suggestions out there to see if it helps. Hopefully you're able to get them working or find an alternate solution.

Thank you, Marty! 😎

Wish granted - thanks for stopping by! 😏

That's completely awesome! 🤣

Ok. 😉

Thierry - completely awesome! I agree - what a difference. 😎

Yes, that would probably be a better format. I did do this in a later review video as I evolved my style.

Hi, Steve - yes, the guys that helped maintain our septic used to stress cleaning the filters regularly. I also found out later that we should be purging the leech field once a year like in this video. The joys of living out of town. 😎

Thanks, Steve! Yes, I'm on a bit of a hiatus on this channel because I'm working on other projects. 🙃 If the attention seems to increase again on this channel, I'll resume making videos again sooner. You may like some of my CZcams Shorts - I did make quite a few of those here as well. Always, I appreciate your feedback and we welcome you to the community!

New Balance shoes - so tempting! Been rocking the On Clouds lately - maybe that's the new trend for millennial dads...

Thank you, Brad. This is why I throttled down on making them. They take so much personal time but then they just don't get the returns. Working on alternate projects now.

Awesome, Brad - good luck!

Hello! Yes, it'll probably do this. But if you're looking to remove algae from a larger concrete or a deck surface, a higher power pressure washer would be preferable. Hope this helps!

Thank you! I'm very glad you enjoyed this as it has so much meaning to you. What a journey to think about the history in a place like this. I really appreciate you taking the time to share your family history here - that my makes this place even more special when we return.

Spearfish Canyon is absolutely beautiful from the pictures I'm looking at. Still curvey, but I guess that's all relative. 😂

Hi, Diana. Sorry about the delay in my response. What I do is carry around one of these amzn.to/3ziUEdv . I had to use it quite a bit before I got my problem solved and it worked every time. Just keep it charged up. Have you replaced your battery (or potentially both batteries if you have a diesel) with the genuine Mopar battery from the dealership? That's what I had to do to bring about my resolution - despite having already bought two from AutoZone.

@@BigfootDadExploresMontana Thank you for replying! I found the problem. I have AMP Research power running boards and the motor was out on one of them, which was impeding it to retract when shutting the door, thus keeping the light on and draining my battery. For now, it's unplugged until I replace the motor. 🙏 Hope this helps someone else.

​@@user-px7np5sb9j- excellent news!! And thank you for posting your resolution. This could be the key to fixing someone else's problem too. 😎

Thank you, Andrerodon! Hopefully you find a good match and then let the upgrade process to begin. 😎

Thanks, Van! Your feedback is much appreciated. 😎

Thanks, TC! Yes, I agree - they are quite a bit louder, but seem to work well. 🙂

Hello. Well, in my case it didn't, but I had a pretty rustic lawn. 🙃

Hi, Michael. These are the stock headlights. They may look a little different because the models have changed since this was new. Hope this helps.

Hi, enrolled2888 - that's exciting! Have you been looking at RVTrader.com? I see a few on there, one of them is close for about 28k. Perhaps they will negotiate.

I like to think of it at aerating the lawn. 😅 Yes, if you have a lush green carpet, this could be bad. But for the terrain I had, it was ok. Certainly I could see the tires digging in some places.

Hi, Wendy - well, that sucks! I wonder how the consumer is supposed to know when to service the unit. Nonetheless, you can put one on and tuck it away safely in the engine compartment. I have one just like this that sits inside my generator and has lasted for years. amzn.to/3V7bd4M Maybe this will help.

Hi, Rich - the (older) cameras mount on a little circular socket type connection. Not the best, but it does work. Yes, you could certainly more permanently mount the base and just pop the cameras on and off. Maybe the design has improved on the newer cameras and would work even better. Hope this helps!

😅 Thanks, UniversalFrost - I think you're the first to comment on that.

Hello! I think it only raised it by 1/4" or so, but we have plenty of adjustment downwards on the deck levels. Everything cut fine and even for me.

This is awesome, Paul! If you want to submit a picture and a brief caption, I can post it on our CZcams community page. Just send it to our Instagram or Facebook page. Thank you!

😎 thanks, SavvyDarxy! I'm glad you enjoyed it.

Hi, Brandon - yes, it seems that seller rotates through the tire selections. Sometimes they're there, sometimes not. I looked on SunF's site and they're out too. Perhaps try these: amzn.to/3KhoIbX Hope this helps!

Hi, Paul! I can assure you this was intentional when I wrote it into the script as us kids back in the 80s used to say it quite a bit. Here's some background: ygdp.yale.edu/phenomena/alls-construction

Just bought a Cub LT50, and was thinking of adding bearings to the axles. If you have an AGM battery you should make sure the battery charger is compatible.

@@anthonybrincefield2812 The batteries I use are plain old-fashioned lead acid batteries. I've found that if I leave them in the mower over the winter it shortens their lifespan significantly as opposed to wintering them indoors in my utility room and occasionally topping them off with the trickle charger. My last battery lasted about 3 years keeping it outside in the mower. My current battery is the same brand, same cranking amps, etc. and so far it is now on its 5th year and cranks the engine over as well as when it was new. Now, of course I don't do that with my truck's battery, but it gets used at least once a week so it isn't sitting dormant in the cold for long periods of time. I did add the needle thrust bearings to the steering spindles and they work great. However, the bearings I tried to replace the bushings with, while they fit okay inside the wheel hubs, they would not fit on the axles at all, not even when trying to persuade them with a BFH, lol. So, for now at least I'll just keep greasing the old bushings.

Hi, Fate - thank you for your feedback! If you haven't had a good electrical auto mechanic do a parasitic draw test, that might be a really good route to go. Or you can do this yourself if you feel comfortable - there are a few good videos on CZcams explaining how to do this. We did parasitic drain tests on mine but it never misbehaved when they were performing the tests. My root problem, or so I think so far, was that my battery choices were sub par and I just needed adequate voltage. I don't know how common of a problem this is, though. Hope this helps and looking forward to hearing how you get yours resolved.

😂 we have a common link to the past and I'm giving you a virtual head nod right now.

Wait a minute, they look suspiciously similar... 😉

Hi, Robert - if I recall right, I think I got about 1/4" from the bigger tires, but I couldn't fit any larger on because otherwise they would contact the deck. Maybe this has changed a bit with models over the years, but I'm maxed out without some serious modifications. Hope this helps.