Video

Thank you so much. That screw idea worked like a charm and helped keep me from gouging the brass. My old gasket was so stiff it’s no wonder it got a crack.

I have 3 leds flashing all togather, how to start the machine?

Demasiado para tan poco.....

thx for the video. At the end, is it normal and expected for that scale setting (6-7 clicks from 0 point- without the red clix upgrade)?

❤❤😊

Does this work on lem versions ?

what sort of yield are you getting from this machine? I have the same version and struggle to get more then 26-28g out. And, usually a very spongy pull unless i raise the lever before inserting the portafilter. Do love the build quality and aesthetics of the machine.

Great video with excellent tips regarding thorough cleaning prior to gasket installation and info about 6 o'clock position check. Thank you!

Ръчна работа !

Hi i have this medicine whats the voltage

I guess that’s what they call floating cone burr design

Hi How do you see the drum, air, and gas settings on the artisan?

Brilliant: Where did you get the blind basket and the nut on top that fits the filter?

I’m thinking about the Rancilio Silvia or the Lelit Anna ant advice

You deserve more views, keep going

dear sir, which one you think is better, Anna 2 or Gaggia Classic?

Beautiful. Can't wait to pull mine with the Linea Mini soon!

Is this 15 bar?

How fast can this spray?

Que lindo paraje.😀

Great video ! Thank you

Perfecr, exactly what I need to see. The use of 41mm tamper, but also funnel is needed for this VST basket.

The PID does not seems to be well set on the left one. We can see it going down to 93 and not going back to 94 in few seconds. The P or the D is probably not set correctly.

My PL41TEM starts at 10-10.5 bar and drops to 9-9.5 during rest of the extraction, I dont’t think I will be able to spot a difference if I adjust it by 0.5-1 bar, also considering the risk of damaging the pipe with screwdriver..

Your instructions were spot on! I did not have a torch so I used a 100W soldering iron which worked well if not a little slower. Much less chance of burning something unintentionally and cheaper than a torch. Thanks!

Melnik is such a beautiful town ❤

Брат классно снимаеш продолжай в этом духе 😊

This video is 4 yo. I have a newer Elizabeth purchased ~4 months ago and is nowhere near as loud as this one, thankfully.

ᴡᴏᴡ

Well I just read the instructions and they say you can adjust the pressure between 8.5 bar-12 bar, you seem to be able to go lower but maybe it works on an older machine!?

All I'll say is don't force the screw... mine was glued down and stripped pretty easily. Applied heat and it still wouldn't budget and now the head is gone... I'll likely just have to buy a new one.

What did you use to drill/polish the hole?

What is your experience on the durability of the head gasket? How often do you have to change it? Due to regular maintainance or only because of leaking?

What's the thread size of the pressure gauge?

Perfekt

How to proceed for a long pre-infusion starting at 2 Bar? My MaraX espresso machine starts directly at 4-5 bars pre-infusion. If you want, I can also send a video

От къде сте ,може ли вашият телефонен номер за връзка !

Tell me please, how much milk this machine can foam at one time? To make two cups of capuccino

Very helpful video. Straight and to the point. I was able to replace the gasket on my Rancilio Silvia V1. Thanks!

this video is misleading because he used blind basket for the test... better take this down buddy

is the minimum weight for the Kaleido 10 not 300gr? Is maybe a little to powerfull

Здравейте,бихте ли споделили дали въпросната сингъл цедка от ЛаМароцо би паснала достатъчно добре в единичната ръкохватка за малката Бразилия Клуб,на която също сте правили подробно ревю! Благодаря предварително 🙏

Thank you… I did not expect a different result

Thanks for taking the time to post this video, but just a word of warning here. Read the comments below re damaging the OPV. My Anita ( PL042Temd) OPV was glued tight at 11 bar so i thought i would bring it down to 9 bar. So i warmed the head of the OPV up, as suggested in the video, and tried to adjust it but in doing so the force i had to use deformed the OPV adjustment screw. The OPV is brass, which is quite soft, and i would urge anyone trying this to be cautious. IF it turns easily...great.. if not maybe try the hack below of using the steam wand to bring the pressure down. I had to buy a new OPV valve and install it, which is not the end of the world ( i actually enjoyed it) !) , and it turns out that Lelit ship the OPV at 9bar so that was a bonus!

Just did this on the Victoria 2023 version, easy task to do, no heating needed. Thank you.

Bro You no is that they cofre?

._.

What settings do you recommend for pl91t with 1.14c software?

Здравейте как бих могъл да се свържа с вас евентуално да се консултирам за слагане на OPV клапан

Thank you!