Video

Wat size swivel

Do i need to change the low oil level sensor when replacing the sump?

I am into battery also. Thank you for the advice about the 4 amp.

I got one earlier this year, it's just fine for a small garden, 2 pairs of batteries is handy but unnecessary. Given the light weight, it doesn't need the handlebars, a simple trigger on the main stem and catch handle would have been easier to work with. Not having to pull and pull and pull the starting chord? Gotta love that.

I bought the same machine last year. Scarified in September, left the grass with no treatment whatsoever and come May my grass has never been thicker. It certainly does the job at a very reasonable price.

Tried it. Dinna work. Drill a 5/8" hole, 51mm from the back of the wheel, behind the silver strut, straight through the rubber and the aluminum. Access the spring that way.

Thank you for taking the time to educate me and many others with this video. I enjoy doing work on my car so I’m more educated in that respect and so I know what work needs doing so I’m not ripped off or scammed.

Excellent video gave me just what I needed. Thank you

I’ve got this model but off eBay. It’s pretty powerful but don’t rely on the collection box as it’s full within seconds. I treat my moss to kill it first as using this on live moss will spread the spores.

This is a fantastic little machine. I produce a verticutter cassette for it, which transforms it into a great all-round lawn maintenance tool…

I see you had a bit of grass in your moss there! 😃

do a run ,and then miss one etc. this means you dont have to run over the moss you have pulled up.

If not done the area previously,I mow short, rake up, scaify, rake up, then iron sulphate, and re scaring a while after.Then use core remover,brush in sharp sand, and overseed.

Those collection have are pointless.Always full in no time. Have the Webb petrol machine,myself.

I've got one of these and it does a good job. Set it to level 3 first and go over it, then have a look and see if it needs level 2. If it does it will be easier than just doing level 2 straight away as you have already removed a lot of thatch and moss.

Can anyone translate this to english? Unfortunately, I don't speak arabic of mexican or whatever. Thank you.

I generally spray with iron sulphate before. This turns the moss black and then a couple of days later rake by hand and fill the bin. I'd like to hire the proper petrol tool and do it right some day. But would need a trailer and builders bags to get rid of all the moss. I'm no expert, but probably best to over seed the part you have done so far and water it if required.

I was looking at these today, are they tough to push forward?

Just what I was looking for. 6 Yr old video still helping people out. Cheers.

very good and help full

I can't understand shit from what he's saying. I just turned off the audio because it's frustrating

Ah think the 02m box is a bit stronger though.

Nice! I need this in my woodwork shop to burn all my offcuts. What size bottle is that please? Makes a good size burner!

bye a Vermont Caster man reverse combustion you dont get what it funktion are best in the world no 1 can take them ,,,

😅 and lastly: Make your own tool and maybe avoid buying any "steering air bag removal tool" like those found on platforms like Amazon as this guy found out it was a waste of his money. He comments on this starting at around 06:20 czcams.com/video/upT4kiCtYXI/video.htmlsi=d4FWlmJhtnQKHq9T

😊 another backside torn away view showing how catch mechanism works: czcams.com/video/adE6dvbdcHc/video.htmlsi=Yq46St1iV7OkqNgD

Accidental 😊 cut torn away example showing how clip mechanism works from tool insertion view: czcams.com/video/q0jZHRy3t1c/video.htmlsi=zyAlpzAUqT7kvZXx

More details and perspective with diy tool done differently: czcams.com/video/bdEBpmSU2Gk/video.htmlsi=-LutbWlMfN5Gctiu

That chimney could have so easily collapsed taking those bricks out

how not to do it

put the chisel on the nut flat!

2023 rust never sleeps in the rust belt USA. On the trusty 2006 Touareg 4.2 v8 now flex pipe leakage both sides. Great help from you, Thanks !

Really nice built stove. Since you are into making different models I'll take the liberty of suggesting something a little different. I noticed that you have used a thick plate for the top and I wonder if you can put hinges on it instead of welding that part permanently. That way you can used as a barbecue getting the heat from the top. Obviously that model is to be used outside when grilling. Looking forward for more of your videos. Greetings from Toronto.

Mine has gone in almost exactly the same place. It’s a Honda and the engine works perfectly. I’m wondering whether to shape a bit of wire mesh over the hole at either side and then use fibreglass and resin to hold that in and build that up for strength. Do you think that would work? I might buy a new one and I could use both to get the grass cut quicker but I am loath to scrap the machine!

Good job extending the life of the deck. Has it lasted still now? 2023.

💯 "Promosm"

Bravo and THANK YOU!!

Curious that little round looking red light on the bumper, what's that for. Mine hasn't worked since I bought the car, the globe is brand new.

I used a jig saw to the cut the top of mine open. Took 10 minutes.

I saw videos of people doing it and just assumed it was a bent flat head screwdriver. Wouldn't release the springs and because you're working blind you don't know this. The tip on even a smaller one is too big. I had an old cheap one with a broken handle, heated and bent it then ground the tip down.

Great video mate. Thanks. Will be doing this job soon but need to know if the engine has seized first… car cut out because it had lost so much oil after having clipped what I think must be a speed hump too

Did you do it ? If so what's it drive like , is it ok in 6th gear ?

Good video doing mine today

Many Thank you , I could not figure out how to get through 2 bolts out .. Thanks for taking the time and including the details . Other videos just show it off and then put the gasket on .

Down the road from ya🤙🏻Mayo man here....fantastic video👏🏻👏🏻....great laugh when u mentioned the “ bastarding smoke”🤣🤣....if you were to build using same cylinder for using ONLY smokeless coal would you do ANYTHING different??????....thanks Tyrone🤙🏻🤙🏻

4 parts vermiculite 1 part cat litter 1 part cement mix with water to a thick slurry cement and line you pan with it

cut the door out first clamp flat bar with mole grips at door opening and bend the flat bar around the tank to get the precise curve in the flat bar to fit around the door precisely once welded onto the door edge fit in place in the door opening and weld the hinges into place that works better than what you are trying

Lots of good blurry video an grass video there. TLDW

Nooice!

Loved the process and the thinking out loud! Very impressive, truly! I’ve got a petit oval Godin I bought 40 years ago. It’s a great heater still. I’d like to get another but the cost is enormous now. So I’m thinking on making a multi burner and wanted to ask if there was a way of getting these thermal brick lining inside to match the professional ones. I’d like to burn mostly solid fuel like anthracite smokeless ovals. I had thought of attaching the fancy pig iron decor one sees on the old coal stoves but would n]know if these decorative pieces would be available. Anyway, thank you for a really interesting build and done with some dexterity too. Well done!