Video

With the benefit of the aluminum flywheel, it's best-suited for troublesome fans with heavier blade hubs, longer blades, and blade arm skirts that rub against the switch housing. The aluminum flywheels are best-suited for the Stealth, Malibu Star, Avalon, Metropolitan/Metropolitan II (like the one you have), Mission, Cathay, Bel Air/Bel Air Halo, etc. The aluminum flywheel was first developed in March of 2023 by Fan Man Lighting for a customer's Malibu Star that they had to change the flywheel a couple of times. They tried it on the Stealth and it made a big difference to have the blade hub straight and true. Domenic Tessari had used it on the Stealth, but he put a couple of rubber washers in between the blade hub and the metal flywheel. The only issue is that the aluminum flywheel doesn't work with Venus fans unfortunately. The aluminum flywheel was patterned after the 0001650 rubber flywheel, so the blade hole spacing should be the same for the aluminum and rubber flywheel. If the setscrew is loose on the flywheel, you'll have to be sure the setscrew on the flywheel lines up with the dimple on the rotor shaft. The setscrew should be a 1/8" or 3mm Allen key screw. For rubber flywheels, I only reserve it for lighter blade arms (Panama, Delta II, Zephyr, Saturn, Victorian to name a few). Now to remove the switch housing, it's very important to use a 3-6lb hammer and a punch or socket bit tool similar in size to the shaft when pressing out the shaft. Avoid using hammers under 3lbs as the shaft can mushroom inwards and won't come out. Be very gentle to hammer the switch housing back onto the fan as you don't want to run the risk of damaging the top end bell of the XLP motor. I've also think it would be best to tape the switch housing and motor before removing the switch housing, then rotate it 90 degrees away from the original position of the switch housing being assembled from factory should it ever be loose again. It's also not a bad idea to change the bearings on the fan so you don't have to come back and remove the switch housing again. If you have anymore questions, email me at adinthepantherfan@gmail.com. Hope this helps.

Thanks. Enjoy your Independence Day too!

First letter starts with month (A = January, B = February, C = March, and so forth until you reach to L = December). Second letter indicates year (N = 1980, O = 1981, P = 1982, and so forth until you reach to M = 2002), keep in mind Q, Z, and I were not used. NN = 2003, OO = 2004, PP = 2005, and so forth until you reach to ZZ = 2013. QQ and VV were not used at all. First 2 digits indicates day, and last 3 or 4 digits indicates unit of the fan made on that day. However, some early 1980 - 1982 Casablancas have a sequential sequence where the 5 digit numbers indicates unit of the fan made on that month and year. This website helps you identify month, day, year, and unit of the fan: web.archive.org/web/20101019165103/casablancafanrepair.com/HTMLFiles/warranty/WarrPDFiles/WEB_New_WarrantyStatus.pdf You can also take a look of its serial number here: imgur.com/gallery/noA8q2i

Hadn't paid attention to most of my older videos. I'll update the description right now.

I would assume they might be. Was there any difference between the early and later version?

@@AdinPanthersFanHobby Not sure. All I know that the Canfield was introduced in around 2007 or 2008

Maybe, but not really the highest priority list.

@@AdinPanthersFanHobby forgot to put this in that comment "It would recreate the Montana's BBQ and Bar Originals I saw on May 4th"

I definitely agree for sure if it weren't for them to be on factory low. They should've added a wall control to operate both fans and have the chain set to high speed from factory.

Thanks! It's funny that he said "disliked sorry" before he deleted it.

@@AdinPanthersFanHobby lmao. He must be throwing a fit over a fake shirtless video!

@CarterLarson7 Bro, you ask a lot of people for shirtless/pantless pics to people (even minors), it’s getting really annoying!

@CarterLarson7 Too bad! So sad!

​@CarterLarson7 You are creepy

@CarterLarson7 yes you creep. What kind of parents would allow their children to have a fetish for shirtless videos and what kind of 18-year old begs people for shirtless videos? Quit sending me friend request on ROBLOX and put a shirt on. I don't accept friend request on ROBLOX to creeps like you.

@@AdinPanthersFanHobby Fr