- 15
- 69 498
PrairieCordgrass
Registrace 6. 09. 2011
Spray paint can shaker quick, easy, and free with any drill.
Use any drill with a spade bit and a couple rubber bands to completely and thoroughly mix spray paint cans.
Having them well mixed means a better quality paint job, and prevents plugged spray can nozzles.
@PrairieCordgrass
Having them well mixed means a better quality paint job, and prevents plugged spray can nozzles.
@PrairieCordgrass
zhlédnutí: 3 273
Video
Mercedes ignition switch EIS module easy repair. Fixes no start, intermittent key switch condition.
zhlédnutí 36KPřed rokem
Simple and to the point video showing how to do an easy repair of a Mercedes ignition switch. The Mercedes EIS (electronic ignition switch) module is well known to fail, causing no start, no crank, and even no accessory or no power conditions when turning the key. This video shows how simple it is to repair yourself, in a matter of minutes, what would cost hundreds of dollars to repair at a dea...
Microwave door switch repair how-to. Easy and straight forward DIY. Save money and reduce waste.
zhlédnutí 30Před rokem
Simple and to the point video showing how to repair your microwave oven with a flaky or non-functional door switch. Make sure to have your microwave unplugged from it's power source before you begin work on it. The micro switches are easily obtainable online or from an old microwave. There are two types of micro switches, normally open or normally closed, simply replace your switch with the sam...
Frankenmuth Dog Bowl May 23, 2015
zhlédnutí 15Před 6 lety
Wheat field fire 1 July 21 2015
zhlédnutí 47Před 6 lety
Michigan Corn Planted April 13, 2012, progress on May 8 following freezes and emergence.
zhlédnutí 654Před 12 lety
Update video on April 13, 2012 mid Michigan planted corn. The corn was planted at 36, 000 population into mid 60's degree soil, and a warm rain following planting had all of it germinated and growing before we began a 2 week cold spell. During this cold period, we had several hard freezes before emergence, including a record cold 25.3 degree temp on the morning of April 30. Soil temp that morni...
Corn planted April 13 in Michigan germination progress.
zhlédnutí 811Před 12 lety
4/23 Update below: 2012's very early spring across the Midwest has prompted many farmers to put crops in the ground earlier than they ever have before. For us, we put this corn in on April 13th here in Michigan. Following a nice .6" warm rain following planting, by April 16 it had germinated, with soil temps holding in the low 60's at seed depth, despite a cold morning today with air temp of ab...
Mill Creek Big Sluice running Aug 2010.AVI
zhlédnutí 130Před 13 lety
Historic Sawmill from late 1700's. Mill Creek Discovery State Historic Park Michigan. Large sluice running, powers the reciprocating saw, and the log traverse mechanisms. Provided sawn lumber for nearby Mackinac Island.
Sarah at Mill Creek Historic Park Aug 2010.AVI
zhlédnutí 33Před 13 lety
Mill Creek State Historic Park Zip Line
Rachel at Mill Creek Historic Park Aug 2010.AVI
zhlédnutí 21Před 13 lety
Mill Creek State Historic Park Zip Line
Matthew at Mill Creek Historic Park Aug 2010.AVI
zhlédnutí 20Před 13 lety
Mill Creek State Historic Park Zip Line
Leahana at Mill Creek Historic Park Aug 2010.AVI
zhlédnutí 29Před 13 lety
Sprinkles The Bunny eating Peaches with Sarah and Lynny August 2011
zhlédnutí 217Před 13 lety
Our very cute, tame and sweet Rex rabbit Sprinkles being fed a peach right off our tree. An every summer ritual, but he much prefers them held, than off the ground.
Thanks
Hey Is There A Video On How You Removed The Stereo/Climate Control Unit In Order To Access The Eis?
There probably is, but I didn't make one because as I recall it was surprisingly straightforward and easy to take those out.
Apologies if this question is already in the comments Will I need to do any reprogramming once I remove the switch My understanding is you do when you replace it I’m hoping you don’t
@@dadzmail69 No programming required if you repair your module.
Niceeeee Thank You For the Quick Response
I think you just solved my problem, ty.
Good idea!
I am having issues with my Mercedes going from drive to park from 0 to 3mph slow speed, and based on my research at the Mercedes forums the culprit is the EIS module. Are you aware of this symptoms as well? They are saying it can also be a defective Diode. Any ways I would like to hear from you before I remove mine. Thanks in advance
No, I'm not aware of that symptom, but then I was only working on mine for the intermittent/no start problem. If the problem you're having is caused by a diode on the EIS, it should be pretty easy to remove, test, and replace if needed.
you shake worse than me bro
It worked! Mine had been intermittently failing for a few months, but never actually left me stranded. Figured it was just a matter of time, and would be an expensive dealer item for the fix, so was getting ready to bite the bullet when I stumbled across your vid. Verified it with a couple of other vids, followed your instructions ... and peace of mind has returned. Many thanks for posting this!
Cool👍 gotta try that
Brilliant! Can't use the jig-saw piece but the drill shaker bit seems like a perfect answer to shaking the cans.
My steering wheel won’t lock when car is off is this also a symptom?
Also, the lights come on but no start.
Good work
Crank tha dam car up
He started at 4.32
What if the key turns and starts it but then car shutoffs 2secs later , it’s Giving me DAS & eis codes on scanner
where are you based ?
Just found your channel and Subscribed. Very nice work
i have a 2006 cl55 mercedes. it starter to take two cranks over a few weeks would take up to 5 cranks to start. now today i put key in and its as if no key is inside i can turn the key but get no response no accessory lights. but my battery is good electric seats lights all work. my shifter is in the way so i cant pull my radio out to get to ignition and from under the wheel its very tight cant get to it. any reccomendations?
I’m in the same boat, did you find a solution?
@@jdmfrs4250 @notflaimed
@@jdmfrs4250 czcams.com/video/s0E8ITTfZKU/video.htmlsi=7LfEsOLdlAABQHX-
When I insert the key, it does not turn, and the fan turns on automatically. Mercedes w220 s500
would this work on a c300..?
Curious how you determined where to start to remove the panels? I would have started pulling and broke something. Thanks
My R350 push button start stopped working and the mechanic said a module needs to be replaced. Is this the module they’re likely talking about? Thanks for the video
My car has been shut down for 3 months...Esl problem by the looks of it .
My 2000 s500 got an key programmed an the key turnes all they way but no start and light just stay on on dash could this be it
If you just got the key programmed, and it never started the car, I would think it's probably bad programming of the key.
@@PrairieCordgrass is that possible
@@MillionairesMoneyMotivationKO while it doesn't happen often, there are numerous possibile software/hardware/firmware issues that can happen with a key's programming.
I'm worn out with it all..Learning alot this evening .. ESL and DAS look like I need to pull out and get re programmed? Gonna try and hit the ESL unit with a hammer to see if it frees it up in the morning.. Great video by the way ..
Thank you so much
Thanks for the video well done. Would this piece have anything to do with intermittent AC loss of cooling? Sometimes it blows cold sometimes its warm. Just curious. Thanks
I wouldn't think it would affect the AC. Perhaps a faulty clutch on the compressor, or low freon so the compressor kicks out on a low pressure condition.
@PrairieCordgrass thank you. I attempted to solder the pins today unfortunately I couldn't get it to work. I assume the solder must not touch the other pins on that board? After trying a few times I pretty much ruined the little pin plug in. 😕 rookie!
Didt u just saved me trip to dealer and possibly saved me thousands of dollars, my car been sitting like that for more than a year, till i ran in to your video, followed your video and fired up :)))) Thanks for your time and your video. Nice to have my car back after a year :)))
Thanks!
So this is only if the key turns and nothing happens, not for a key that won't turn right?
Yes, This fixes the problem where the key turns but no electrical connection (no engine cranking) is made.
OMG 😮
When i put my key it always turns but when i put it 2 position 1 sometimes its like the car is dead and the lights wont come on and when i try and start the engine nothing happens. Is this the same symptoms your car was having?
Exactly the same symptoms I was having.
I have that too, thanks for the tuo.
In the SEC, it just means more!!!!
You can always count on Auburn fans to show just how red their necks are. Usually they tear down the goal post too. Should be happening about now. Roll Tide and yes I am a sore loser.
Did an Auburn fan poison a bunch of mature trees on your campus?
Buwahahahaha funny ass shit right There
that was my sister no joke!!!!!
Wildebeests