Video

hey there. it's my first time doing DIY and I wanted to try this on my S10+ because the repairman accidentally had his fingerprint inside the glass and it makes photos blurry. is there any way I can gently crack the glass instead of using a drill? kinda scares me 🥲

Can the k20 compressor work on the k24?

Thanks a lot. How do you store the pump end of season? Does the filter material have to be dry? Btw i use glass as filter media

I was fighting the bearing and backing plate on my ES330 so hard... That trick with the bolts and washers was pure gold. I was able to get it to move a little bit, then I kind of hit a wall because the bolts kept slipping, so then I tapped it around with a hammer after that and it came right out. Whereas before, hammering was doing nothing. A combination of techniques was definitely necessary. Thanks again and I hope this helps others.

This does not apply to 2006-2007. These years have an air box under the intake that is a whole different animal

I love maple syrup 🍁🍁🍁

Really helpful, thanks so much!

Is the gps preloaded or do you have to pay for it. Is there a cd player in it. My 07 v6 cd player broke

U don’t have to cut extra holes just unscrew the 2 things in the radio and move it over

great video! you saved me a ton of money, just learning how to remove the pump and check it - turns out mine had an obstruction stuck in the impeller. Here's to hoping the resistance didn't burn up the motor. Just need to buy a new crimp clamp and put it back together and test!

Thumbs up for the classical music.

short video, I love short videos: very very helpful, Thank you SIR, Thank you!!! I fixed all by myself and it cost me only $24. Since I fix it by myself I can spend more money on good quality parts. There are some parts out there and they are only $16. I wanted get better quality.

😂

Thanks so much you saved my pool Best way instructions suck

Where can I buy that entire air vent assembly that you removed? Can't find it anywhere. My wife broke it using it as a phone/cup holder...

About how much does this cost? Whats model?

Hi, what is the best pump position for vacuuming the pool?

The problem he is using a very small filter I have a sand filter which holds 150 libs not so easy to remove the balls. I did find a shortcut, just take the value head off after you have shut off all water going to pool, and use a hose with a powerful nozzle on it and rinse them off and let water drain out the bottom of the filter, this did work pretty well. Hope this helps, the biggest problem with the balls is you cannot backwash to clean the filter after putting Algicide in So if you don’t clean the balls first, and you jump algicide in, it’s just really affecting your pool.

Whenever I backwash, I get a ton of sand coming out. Is that normal?

#4 Brutal! I trashed the plastic but finally got it off. The filters are trashed. Not even reusable so hopefully I can get those. Cleaned out all dust and tested the power - still surges so I guess new battery and flux capacitor 🤦🏽‍♀️

Hello! Thank you so much for this information it was very helpful! I just did a back wash and rinse using a hose to direct the over flow elsewhere. But now when I turn the filter back on and make sure the hose on the left is “unlocked” it’s spewing out of the filter. How do I get this to stop? I appreciate any recommendations.

After mine goes to diagnostic mode (all the lights flashing) it immediately goes back like its off, whats that mean

Hi, getting ready to replace rad on 2005 Toy sienna, how many hrs labour approx? Thnx

Could it pulse due to a still wet filter?

Best change video ever, thanks

I want to remove the floating circle how do you do it it’s annoying

Helpful and clear video! We used this to replace the circulation pump of an IKEA machine. The new pump cost $38, very favorable compared to other options.

Should I use recirculate with crazy clarifier? Awesome helpful video! Thank you!!

Thank you very much sir

Thanks man you helped me avoid taking apart the surrounding dash parts!

No ladder???

You dont add any oil to condeser or the drier? Just curious

Thanks

Excellent video 👌🏾

I had no clue before seeing this video. THANKS

What was the link to order the kit

Thanks, this helped me get it done quick and easy (with some screwdriver persuasion).

Have the Bravos 300 Quiet (model # mvwb450wq2) and getting an F51 code. Pulled the metal wash drum out and didn't find anything (socks, etc) trapped under it or blocking drain holes in tub. Cleaned all parts/pieces before reinstalling and still getting F51. Lid locks, fills with water, and then won't do anything. Replacing the RPS/Rotor Position Sensor is the other thing I've seen indicated for this F51 code--would a faulty RPS be enough to prevent machine from starting agitator plate action for wash/rinse modes? I guess the RPS can fail without warning--machine worked great until a week ago. Also, is the stainless wash drum supposed to spin freely by hand when machine is off (mine does not)? Thanks for any info/insight.

Is there a certain electrical hookup requirement for this pool?

Very helpful 👍🔥

I did all of this and it ended up being the battery

Great video, very helpful!

Thanks-

I was replacing one of the bulbs with the lights on and now all the lights are off

Thank you, thank you-

Thank you!

I put this in mine but the sound is low

Always love a good GI Joe reference form the 90's.

I read on here that when the pressure gauge goes up then it’s a client’s time to clean the filter balls, what about when the pressure gauge is low? Any idea what thats indicating?

QUESTION: When I turn the pump off and the handle to STOP it does not stop the flow of water from the B ports and I cannot open the backwash port without water gushing out. Any ideas on why this setting does not stop water flow?