- 52
- 507 299
Bob Forwark
Registrace 7. 12. 2006
Christmas Inflatable Light Change
In this video I show you how to change burned out or really dull lights in a Christmas Inflatable. It's really easy to do. The lights I used I got from Amazon. Here's the link: www.amazon.com/dp/B07CMCRTFQ?ref=ppx_pop_dt_b_asin_title&th=1
zhlédnutí: 104
Video
Putting a Fumoto Valve on a 2019 Miata
zhlédnutí 385Před 7 měsíci
A quick oil and fliter change on a 2019 Mazda Miata and adding a Fumoto oil valve to replace the drain plug. This will make the oil change easier in the future.
Replacing the battery in a 2016 Harley Tri Glide Ultra
zhlédnutí 6KPřed 7 měsíci
A quick vide on replacing the battery in a 2016 Harley Tri Glide Ultra
1K Subscribers!!! Thank you my YouTube friends.
zhlédnutí 88Před 10 měsíci
Unboxing and evaluating the bObsweep Dustin Ultra
zhlédnutí 29KPřed 10 měsíci
In this video I unbox and evaluate the bObsweep Dustin Ultra. This is there first self emptying robot vac. It's a long video but I put in chapters so you can jump around. Timestamp 00:00 Intro 00:17 How I got the Dustin Ultra 02:31 Unboxing Dustin Ultra 07:36 Putting Dustin together 14:36 Loading the software 15:26 Adding Dustin to the app 19:00 Creating the 1st map 19:22 Returning to base 20:2...
Replacing the Idle Air Control valve, adjusting the base idle speed or how to tame a bucking Bronco.
zhlédnutí 749Před 11 měsíci
I had an issue with my 2002 Miata hesitating and I believe it's fixed now thanks to cleaning the throttle body, replacing the Idle Air Control Valve and setting the base idle speed. I actually believe that setting the base idle speed adjustment fixed the issue. Timestamp 00:00 Intro 00:37 Test Drive 01:15 What the test drive didn't show you 01:39 Changing the fuel pump 03:00 Wife takes it out f...
Air Filter Replacement 2016-2023 MX-5 Miata
zhlédnutí 1,4KPřed rokem
This quick video shows you how to replace your air filter in a 2016-2023 MX-5 Miata. The total job should take you less than 2 minutes. K&N Performance air filter part # 33-5040.
NB Miata Window Regulator Replacement
zhlédnutí 3,7KPřed rokem
Learn the secret to easily replace the regulator. I take you step by step for replacing the window regulator in your NB Miata.
What did you do to your Harley today?
zhlédnutí 1,2KPřed rokem
I did a short video on the 50 updates and accessories that have been added to my 2016 Harley Tri Glide Ultra. The Harley 50 Freedom Shield Windshield Windshield Trim Mirror Mount Kit Windshield Trim Mirrors Kuryakyn Vent Trim - Chrome Vent Bug Screen Adjustable Air Deflectors Innovv K3 Dash Cam Front and Rear cameras Custom Dynamics Front Turn Signal Lamps Highway Pegs Ciro Big Ass Drink Holder...
Cool Oil Change Products for you Harley
zhlédnutí 286Před rokem
I share 2 tools for doing a 3 hole oil change on a Harley. You can also use the Drain Plug Pro on your car. Greg's Drip Free Oil Filter Funnel www.amazon.com/Ernst-Manufacturing-Drip-Free-Filter-Funnel/dp/B005Z2K89Q OTC Drain Plug Pro www.amazon.com/OTC-Tools-5911A-Magnetic-Remover/dp/B01MSJEBBO/ref=sr_1_3?hvadid=409942957185&hvdev=c&hvlocphy=9029984&hvnetw=g&hvqmt=e&hvrand=11787623756266117943...
2002 NB Miata Rear Brake Job
zhlédnutí 2,9KPřed rokem
A quick video on how to replace your rear brake pads on an NB Miata. I believe this is the same for an NA.
Wyze Video Doorbell Pro Install and Review
zhlédnutí 6KPřed rokem
Arlo decided to increase their monthly rate so I decided to go with the Wyze Doorbell since I already pay them for their service. I didn't need to pay for both of them. So far I really like it. It alerts a lot faster than the Arlo which I think is a real plus.
Installing a Ciro Tri-Bar Air Cleaner on a 2016 Harley Tri Glide
zhlédnutí 470Před 2 lety
In this video I install a Ciro Tri-Bar Air Cleaner that I purchased from them for $40. It's normal retail price is $299. As of this video they were still selling them for that price. It's a 1 Beanie install and it will take you about 15-30 minutes.
Innovv K3 Dash Cam Install On A 2016 Harley Tri Glide
zhlédnutí 4,2KPřed 2 lety
This is my install video of the Innovv K3 Dash Cam on my 2016 Harley Tri Glide. I tried to hide it as much as I could. The system works great and the video quality is really good. This is a good article that talks about what it can do. www.webbikeworld.com/innovv-k3-action-camera-review/
Are your bars hitting the tank now looks really tight. Can you still turn lock to lock ????? I’m skeptical
No, can turn and lock.
I put some custom Dynamics pro beams on my 14 street glide special and they hyperflashed for a short time and then they stopped and worked normal. Yeah go figure. Anyhow fast forward to my 2019 Street glide special and i used the same lights from my 14 and they are hyper flashing. I figured there was a fix bc i know they are compatible with all the newer bikes.
The app has an option under cleaning preference that you can toggle on to get him to finish cleaning if he has to recharge before finishing. If you toggle on "auto resume" he should go back out and finish the job. Mine does anyway. If your app doesn't have that option, it may need to be updated again.
Thanks, they added that feature in an update. It wasn't there when I did the video. I was one of the early adopters. I have that set now. Thank you for the comment.
another great video and will be doing this before next road trip last yr road from florida to west virginia to kentucky to nc then back to florida 500 miles a day roughly and between the heat of the engine plus the wind coming up this might be a good fix for me.
I know this video is a few years old, but what are your final thoughts on the wind deflector wings, do they work as advertised or is it just another snake oil product?
Good question, and as I think about it I'm not sure. I know it didn't help wind buffeting. Since the Trike has the wet heads I don't know if it helps cool the engine that much. Maybe an engine without the wet heads it might help more. I do know that my cylinders run 230 and up and my oil has been up to 260 in the Arizona heat. However I have no data before the installation. I don't think I would purchase again.
@@Batman825 Thank you for replying and your input. If I were to purchase them it would be for the engine cooling aspect, I also live in a hot climate (Florida). I already solved my wind buffeting issue with fork mounted wind deflectors on my Road King. I'm not sure if my ecu does data logging or not (Thundermax) to see if there would be a cooling benefit or not. Thanks again.
Excellent thank you god bless that will take me three hours thanks
seriously. excellent detail, well put together, honest, 10/10.
Good video , you forgot to put lock tite on rear tank bolts. Lol😂
your video popped up probably because looking at dk customs stuff, and since it's been some time ya installed it, how is it working out far as buffering, extra cooling on the motor??
Because of other things I did to cool down it's hard to tell how well it's working. My cylinder heads run about 230 when it's hot here in Phoenix. As for buffering, I don't think the cool wings help that much. The Road Glide design does a lot better for buffering.
@@Batman825 nice, i'm in the las vegas area so have similar heat conditions. i have put on the love jugs on 2 of my bikes and helped a lot mainly slow to stopped waiting at intersections.
Wasn't sure if I was comfortable with doing my own; but after viewing your video, I'm set to go. Thanks for the excellent instruction.
I'm glad it helped. Visual learning is the best.
Any changes on performance
Not really.
It may be that your floor isnt level in some spots for the mop.
Thank you for sharing. How did the system work? What size lift did you install ? Did any of this effect your fuel gage
I haven't noticed any effect on the fuel gage. The system seems to work fine. The Harley engine is a hot one and removing the cat really helps also with the right side of the bike.
thanks for the video! i watched it so i could learn how to get the body off so i could change out the slip ons. i got the TAB 4 1/2 zombie baffles. why does Harley make everything such a pain in the ass to work on? lol
Isn't the screw you're talking about in 11:08 the infamous "no touch screw"? I'm trying to set idle for my 95' Miata after cleaning the throttle body (before it was 800RPM, now 1000-1500), but I can't find the definitive answer which screw should and shouldn't be touched.
I believe it is the no touch screw but you have to adjust it for idle speed. This was told to me by my Miata mechanic and he's been fixing Miata's for years. Also I believe the manuals will tell you that only the dealer should touch the screw that's how it got the name of the no touch screw. There are other videos on CZcams that address setting the idle on the Miata. My problem was finding what was causing my Miata to act the way it did and I found adjusting the idle fixed the problem.
Adding WD40 in the tube helps
I am going to buy the first robot vacuum cleaner in my life, do you recommend this one?
I've had 3 robot vacs so far. After using it for 9 months, it does have some quarks. It get's lost occasionally and just roams around. The fix it to make one of the saved maps active. I recommend having 3 maps to fall back on. That is one of the best features. I would not use it for mopping floors and it does work well on wooden and carpeted floors. I like the dust bin emptying feature as the vac I use on my first floor I have to remember to empty the dust bin. So would I recommend it? Yes, but just know that it's not perfect and it does have flaws. But it does do a good job cleaning.
What mirrors are you using?
Their Harley Mirrors
The LED of the power controller is constantly glowing either red or blue when the entire system is turned off - is this a malfunction?
It seems to be normal.
Thanks for the full review!
Thank you for this I could not for the life of me figure out how to take off the cover, lol. the crazy thing is I have the exact same bike and paint job lol.
Just got one ordered from Sam's Club, on a promotion for *$219 until June 2, 2024*.. I thought that was a heck of a deal being $380 off their list price.
same here
They are always on huge markdowns. Always. You actually bought the regular price, This is a $200 vacuum
@@gamatoutsikos I'm satisfied for 200
Best Buy has some super good deals right now, you can get one that usually costs 1000 dollars for 220.
Helpful video thanks. The Mark 4 does not have removable pulleys shown at 17:20. I’m struggling getting the cables in.
Great video thank you
I am looking at wi fi security cameras and doorbell. I am new to this, but I am overall quite disappointed in the video quality and the need to subscribe to a service to use them. I use the Apple iPhone/iPad and am trying to use my existing home capabilities. My existing LED driveway lantard sconces have just failed at 5 years old and am looking to replace them with smart lights to tie into my home WiFi so I can monitor my cameras from my devices including my TV’s.
Thank you for this video. My 03 had a code for IAC and this helped with replacing it. Working on cars is intimidating for me and this helped a lot. Thank you
Thank you for the comment, it makes me feel good that I help others.
Thanks. I don't think there were other wires attached. I did find that I accidently tore the security antennae (Delphi p/n 28054517) from the harness. I'm thinking this is likely the problem. Thoughts?
Could be, I'm not familiar with how the security system works on your model. My 2016 model had a different system.
I changed my battery and now my security alarm keeps going off. Is it possible I missed reattaching the connections for the alarm? (2012 HD Tri-Glide)
Not sure what to tell you. I'm not familiar with the wiring of a 2012 but I would think that you should have removed 2 screws, the positive and negative terminal, on the battery and just replaced it and put the 2 screws back in. Were there other wires attached to the terminals? Maybe you missed putting them back on?
So how does that bracket come off after you got the stock cleaner off? Literally the reason I watched this video and you didn’t even show it
Ha-ha, you're right I didn't show it because I didn't realize I had to remove it. That's why I put it in the description. It's a PIA because the tank is on it. I had to lift the tank to get an allen wrench (I think that's what it was) on it. I should have filmed it.
Hey man....would you know why my brake fuse keeps blowing after I went to led brake lights on a 2013 ultra classic triglide ...also the led spot lights aren't working...thx in advance
Taking a guess, you must have a short somewhere and when you apply the brakes it blows. Go back over what you did and make sure you're not pinching a wire. It should be a simple job to replace the lights so I suspect something with the socket and assembly. On the spot lights, try turning your high beam on or off. I know when you turn on the High beam those lights may go out. Hope this helps.
05:53 They said that they are always in touch with their customers, and that all kinds of fasteners are included. Meanwhile... 🤣🤣🤣
regarding the removal of the trunk is this the same procedure for a 2021 tri-glide. i don't want an electrical problems thank you for the videos. trikes are very popular now. can you make a video of changing the rear hydraulic brakes or just bleeding them?
I don't think Harley had made any changes to the way the body comes off so it should be the same for the 2021. As far as bleeding the brakes, I did do a video on that.
Ya but what if the windows won’t go down, which would be one of the main reasons you’d be changing the regulator🤷♂️🤷♂️
Not sure I understand your question? If the windows won't go down it might be your motor or switch. You have to take it apart to determine that. If it is the regulator you will know when you take it apart.
I agree. He left out the part how he got it down half way. I assumed he has somewhat still functional.
My window (2001) malfunctioned today. I brought it up a little bit and I heard this weird crackling sound. At the next light, I played with it, finding that I could raise the window but not lower it. Being in California and not worried about rain I figured it was going to be fine until the weekend when I had time to tear the door apart. Do you think I'd even have to look at the motor since it seemed to function for the raising part? (I'm about halfway through this video so maybe I need to watch more and I might get my own question answered)
@@HorizonMelt I would say your motor is fine. I would bet the cable broke or the plastic pieces that the cable runs on. The plastic wears out with time and both of mine were that.
Does the seat of the triglide fit the road glide next to it?
Yes, if I remember correctly.
Well done, easier than I figured. Doing mine very soon. Thank you
This video is so comprehensive! Thank you. I just bought one and setting it up seemed daunting. You made it look easy and... Fun.
I'm glad it helped.
That's the easy fluid change. What about those poor souls that have to loosen exhaust. How is that done? Can't believe HD did that.
You got that right. I changed out the stock exhaust and now I have to do that.
Hey Bob! Thanks so much for posting. My 96 m edition has the same weird bucking bronco affect. My wife and I have troubleshooted everything you said in the video-except the idle speed adjustment. We will try that next! Also, is little red still running good now?
Yes Lil' Red is running great since I did that. Please let me know if that fixes it for you. Good Luck.
This thing would probably have to run over the same area multiple times to get it clean, and even then it can't properly clean the pad... so you have to replace or wash it constantly ..
This is exactly the vid I was trying to see... TY
Thanks for this detailed review. I'm thinking of putting this upstairs so the stair error is definitely a concern. The no-sweep zone is the last resort I guess.
Excellent video and you saved me hours of headaches. I just returned an Irobot Roomba I3+ because the vacuum emptying sensor problem had a problem. I have one of these on order. Thank you.
Really appreciate it!Very helpful video
Another great video...Were those OEM pinch blocks?
Yes
Great video...Was there any particular reason why you went with the S&S headers?
I was hoping that I could remove the trans cover to bleed the clutch but I can't. I still have to back out the headers to remove the cover. It looked like there was enough room to do that. Live and learn
Question....After your trike is warmed up from a few miles, dose it start shifting louder as you go through the gears? @@Batman825
@@rickyricardo976 No, what year is your trike?
Great video...I have the same year Tri-Glide. I put a set of comfort lift brackets on without taking the body off. It wasn't to bad, but would have been easier with the body off. I'm going to be installing a complete stage I system and a pair of new shocks, so the body comes off this time...Thanks :) By the way, it sure would be nice if there was a company out there that made a portable jack/lift for trikes?
Thanks Bob, this also helped me replace the motor in the door lock actuator. Great how-to on getting inside the door internals!
Glad it helped.
Thank you, hope this will work on my 2010 flhxxx, manual stated i had to remove the fenders also,,, WTH?
Being as how radio shack is no more where would you get it now?
Do a google search, Amazon has them.
I can’t get my positive tight
Not sure what to tell you? I'm assuming that the screw is too long? Maybe add a washer on the screw and try that? Are you compare the screw on the new battery to the old one and maybe try that one?