Video

I still own this cooler, it's cheaper than some other brands AND has wheels. I still recommend it if it's the right size for what you are looking for. Keeps everything cold for a long time.

I honestly can't remember, the software has capabilities to remap the buttons so it could very well have a setting there to make the buttons not do anything. Check or download the software to see if it can do it. I no longer have the mouse to test this.

@@TonysTipBits Ok well thanks for your help the video was very helpful and informative

No problem! Thank you for watching!

Thank you for the tip, apologize about not being able to find this video. Will work on search optimization to help others find this video. I hope you were able to get the o-rings to fix your situation. Thank you for the comment ava watching.

Thank you so much for the encouragement!

Thank you!

You're welcome!

Not really you can probably squeeze 10 oz with the coffee setting. You can do multiple brews to get your volume.

Any can of compressed air will do

Thanks a lot!

No problem! Let me know if that works for you.

Sure. I had never heard something named “compressed air” :) You know, generally males are familiar of these kinds of stuff! I ordered one from Amazon Turkey yesterday. (It’s s bit exprnsive BTW.) I’ll let you know if it works. But if it does not work, I am going to collect my money from you by force! 😊 (I’m just joking :)

Are you talking about the LatteGo container?

Yes for the espresso option you can do two. But for the 4300 you can't add an additional shot of espresso with your drink option. Only the 5400 can do that.

Thank you!

There is a welding shop nearby that swaps out the tank with another that has food grade CO2. Pretty convenient.

@@TonysTipBitsThanks. I am worried about finding food grade near me

Look for Homebrew stores in your area. They should be able to help.

Thanks!

Nice thanks for sharing!

Thank you so much!

You're welcome!

Awesome! Thank you for the response!

Yeah for sure!

Absolutely, but at least for this is only coffee.

Yes, for the beans that I'm using the super fine which is the lowest level is what I have mine set to. It really depends on the bean and how you prefer it. And also certain grind levels work better with different beans. So you'll have to play with it for some time. Remember when you're changing the different grind settings to do it as it is grinding the beans. Thank you so much for watching and leaving a comment.

@@TonysTipBits thanks..I will be using Starbucks blonde expresso to make my flat whites.. Also question on the cups..the smaller ones are tue 5.4 oz ones? That seems small tje drink you made. I see the larger ones are almost 12 0z.. Thanks again

Watch out because sometimes those Starbucks beans can be a little oily. So check that out, but if you keep your machine well maintained it should be okay. Recommendation are for beans that are less oily. The smaller cups that I have are typically for when I'm making an espresso or double shot of espresso. I do have another set of cups that I use when I'm using the lattego frother that holds about 10 oz.

@@TonysTipBits ah ok 10oz. Yeah the blonde roast are not shiny and don't leave any residue on your hands if you rub them between your hands.. That's the tests I read in another CZcams video..

I'm good at maintaining things so I just need to finds what you lube.. It's only me also so it won't get a lot of use like a family... I will still buy my first flat white of the day at Starbucks.. Just not 2 any more..😊

It's circulating the air inside

I does you no good to vaporize the water from the filament and not evac it out of the dryer. it will just re-absorb back into the filament remember water has three states - Solid-Liquid-and Gas or (Vapor) You must evac the vapor as the dryer pulls it from the filament other wise it just remains inside the dryer no matter how hot it gets. @@TonysTipBits

True, I end up opening the case once or twice to expell the vapor. That's been sufficient.

For sure! It should work for the 3200 as well.

Thank you!

You're welcome! Thank you for watching!

You're very welcome! Comments like this really motivate me to do more. Thank you!

Great, glad you got it going again!

@@TonysTipBits Thanks. It works Elhamdülillah 🤲🏻

You're welcome!

Maybe it's something else that's not showing it to work correctly. A different issue.

Did you try the trick as shown in the video?

You're welcome! Thank you for watching.

I haven't cleaned the grinder, but I do run the brew group tablets every month

@@TonysTipBits thanks mate, might have to see if I can find a tutorial about taking the hopper tray off to perform a super deep clean, I've been doing what your video shows as a basic clean once a month as it only makes 10 coffees a week maximum. But I'm sure there must be an effect of the ceramic grinder never being fully serviced, I know it's something that Phillips don't recommend but my machine is way past warranty.

Let me know how it goes! Thank you for watching.

I've found a video tutorial, and I've just followed it, works out great but I'm no CZcamsr, how can I send you the link privately. With your followers I think it'll be a great addition to your Phillips LatteGo maintenance videos (post warranty) of course

You may post the link in the comments here, I'll check it out. Thank you!

The device has a guide that puts your knife in the correct orientation. It takes out the guesswork

Thank you for your feedback!

Thank you!

It's not bad, the sticker is annoying but I haven't had any issues since. I have a 2 year update video if you would like to watch that. Thank you for watching!

You're welcome! Thank you for watching. I'll do one soon about cleaning the machine.

I would recommend for it being on the ground. I couldn't imagine what would happen if the firepit tipped over or something. Solo stove makes a smaller sized one that might suit your needs if you want to put it on a table.

I might talk to support on this one. I would try to reseat the water container and push it in towards the bottom of the container to see if it seats it better. Another thought is to blow some compressed air into the inlet and see if that helps the sensor. If not please reach out to Phillips.

Lavazza Super Crema (I put a link to it in the description) and max fine grind is what I found works best for this bean.

I only used stage 2 because I already converted this 20° knife to a 15° that's why I started on stage 2 to just sharpen. Stage 1 is only for the conversion. The advantage is that the knife is "sharper". "If you are using a given knife for heavier cutting or chopping if probably is best sharpened at 20 degrees. If you use a small or medium size knife only for light work such as paring, peeling, or light slicing you may prefer to sharpen it at 15 degrees in order to take advantage of its increased sharpness."

@@TonysTipBits Благодарю за ответ!👍

Thank you for confirming and validating my frustration!

Nice! I heard of others doing this method as well. I'm also homebrewer so having this CO2 tank just made sense for me with kegging. Thanks for watching!

Yeah definitely some lessons learned since then. Glad I could get you to laugh though LOL.

You are so welcome! I'm glad I could have helped! Enjoy your coffee!

Sorry to hear that. It's been well over a year and my particular machine is still doing well. Regardless I hope you are enjoying some good espresso drinks!

Hey there! The brew group O-Ring is the very last link in the description. I believe the size is 32 x 4mm but have not confirmed this.

Thanks for asking. I've been meaning to do another video update and probably will in the future. After 1 year of use the machine is still working well. I've been maintaining the machine every week so that I'm getting the best out of the machine as possible. It only takes about 15 to 20 minutes to really clean the machine and I do it every Sunday. Other than the o-rings, no other major issues. As long as you keep it going and the o-rings are lubricated, you can pretty much keep going. Stay tuned for another video because I think I should do an update for everybody out there. Thanks for asking !

Maybe something else is going wrong with it unfortunately. Did you manage to figure it out?

Awesome! Glad I could help!

Yeah I learned this afterwards, the tape is on and works. If I need to refresh it I'll change how I put it on.

Totally agree, I've more than once ate my fair share of chicken from Inka.