Video

Springers can be pretty rough on the scope. Only way to get by this is to buy a scope that can handle the recoil.

Hi John I still have not recieved an M4, so I will know for sure, when I have tested it, but since I have my dual bottle adapter with 2 300 bar bottles I will most likely get a 1st stage reg. I love the Huma reg in my Panthera, but for the M3 the AMP2 has been perfect 🤗

@@VikingAirgunner cool Peter looking forward to that 😀

You know what Peter.i knew that a lot of people don't like fx.but I never knew how many until now. Lots and lots of people hate fx some people are even saying that they are shit. It just makes me a little bit sad I love mine 😔

@@johndanville6643 I hear you! I just rely on the results that both others and I have. FX Impact has won competitions that are open for anyone, and my own groups are really good🤗 So let the haters hate 😃

@VikingAirgunner your right Peter. It's just starting to piss me off a little But yeah let them hate. I'm sticking with fx no matter what the idiots say. Until we chat again Peter take care of yourself

The laws in Denmark requires a hunting licence for anything bigger than 177. Getting the licence is quite a taske and on top of that you a permit for guns of bigger calibers and that takes ages to get. So all in all a big hazzle.

@@VikingAirgunner Oh I see. But if you go .177 you have no limitations?

@@Maxime-ho9iv Not as it is right now. Hope it stays like that 🤞🤞🤞😃

Hi Bastiaan My experience is only with 177 so I will try not to sound like a professor here 😃 Which velocity are the best for the Hybrids that you are using? Generally bigger calibers are using higher reg preasures and with the 600 mm barrel it also requires more reg🙂 So 130 might not be far off.

@@VikingAirgunner Thank you so much for your answer! I've looked around on the different forums to find a velocity for the.22 fx hybrids, but there's quite a variety in results people get. From what I found best performance is in the range from 915-930 fps. With 930 fps I got a 8mm group at 25 meters. I saw your video about the Huma high-flow slug/pellet probe which I want to try as well to 'tune things down' a bit.

@@bastiaanschaap Knowing that the potential of the Hybrids are within that range helps alot. And even after finding the perfect velocity it can easily change anyway. So a good start👍 Next step is to tune the gun so that the absolute maximum speed will be 30-40 fps faster than that, so perhaps 970 fps. After that use the power wheel to hit around 945 fps and then use the front valve down to 930 fps. And if you want to go lower just decrease the 945 fps by the same velocity that you want to lower the target velocity 🙂

Saddly I dont, but I hope so 🙂

@VikingAirgunner Hi, Thanks for the reply i have asked the same question to someone else, and they replied that they have contacted fx directly, and they said no, the mk4 trigger assembly won't fit the mk 3 that doesn't surprise me Thanks

@@lankey21 Thanks for sharing mate 🤗 A bit sad though. Would be a sweet upgrade 😎

That sounds great John 😃 Do you have an ETA?

@VikingAirgunner o not exactly they just said it's on order today and hopefully get in a week or so fingers crossed To be honest I can't really afford it bit just can't help myself buddy

I have no idea, but in a way I would be surprised if it doesnt🤔

It will not be compatible

I think that it will be a good idea to test it i the standard setup. But if it comes with a standard superior liner and a pellet probe I might have to take a deep breath first 😂

Hvor er det fantastisk 🤗 Jeg talte med ham i går og han nævnte, at dem som han havde bestilt som M3 var ændret til M4, så absolut super for dig 🙂 Jeg tænker, at vi nok får fra samme levering - alle mine Impacts har jeg fået gennem Arms Gallery, så nu bliver jeg helt overtroisk 😂 Lad os snakkes ved, når vi har fået geværerne. Der kunne måske være noget ved at vise to setups ved siden af hinanden 🤔🙂

The Iphone strategy 😎😃 The M3 will do a great job for another 2 years for sure - I heard that the M6 will be a blast 😜

Minor upgrades indeed. Getting rid of the 1st reg is the biggest selling point for me, but then again u can do that easily on the m3 also..If you got the $ to spend, sure go grab one..if your happy with ur m3 like me, save the $ for something else..Just my opinion, will pass for the time being.

Thanks John🙂 I think that we are on the same track. Moving the parts that we like👍 My arca swiss rail and the angled gauge mount with the Sekhmet will be first. Bag rider also 😎

@VikingAirgunner dam right Peter. No uther gun on the market like it.i simply love mine. And to all the haters I day get lost.lol

I heard that the M6 will be quite something 😃😜

I doubt that I would do it with a 3 month old M3 🤔 There is much to learn and enjoy with the M3. It is an amazing gun. Absolutely love mine 🤗

@@VikingAirgunner honestly with the off season Ive had it sight at 30/60 yards and it’s spot on with nickel to quarter size targets shooting pellets. I bought a slug liner and barrel sleeve but I am afraid to install it as it may change the accuracy. I am so looking forward to small game this season and it’s not coming soon enough. It didn’t take me much time to tune my M3 but I feel theres so much more I haven’t learned.

@@ronsteele1835 ask if they will do a sale price match. 😂 I highly doubt it but worth a try. Utah air and pyramid is on sale atm for the M3 version. I don’t think it will last long

I was about to go buy an m3 on the 20th of this month till i got a notification yesterday about the new m4

@ronsteele1835 that is OK you can upgrade it with m4 parts when and if that's the beauti of the impact buddy. The m3 is no less a gun now just enjoy. I'm have a m3 but I'm going to be getting my m4 parts as soon as I can

Bought via internet? You can return it without reason. I would go for the new version.

Just refuse delivery and ask for a refund?

An upgraded M3 is still pretty close to the M4 and an absolutely amazing gun 🤗

You still a fantastic gun. Get to know it and enjoy it and then maybe down the road you can change.🙂

I was in that exact same situation when I had just bought my Wildcat MK3 and the BT version came out a week later 🙄

I answered this in my latest video, so take a look at that. Remember that it has to do with the volume of air you have available. 1x480 cc or example 1x580 cc. I never clean my barrels - or I might do it if I cant find accuracy. But it has never made any difference.

@@VikingAirgunner Thanks peter,. I waithing, your tunning for high Power more than 1000 FPS. 20grain... cal .177 If possible,. What do You think ???

@@sniperrimba69 Check my channel. Its all ready there 😉

@@VikingAirgunner Please send link,..

Thank you so much 🙂 I do my best to show my results and be honest. So very happy that it is appreciated 🙂 Im not sure exactly what you mean by the velocity. Can you perhaps rephrase so I can give you the best answer 🤗

Thanks buddy 🙂

Its been ages since I saw someone doing it, so I cant remember the video, but it is very simple. I use Autosol and just rub each spring with my fingers for like one minutand then clean and lube before installing🙂

I dont remember and it will not make any sense to unless you have the same hammer weight as I do - 7 g. Just go low and work yourself up 🙂

@@VikingAirgunner Perfect, thank you

Its a great piece of equipment. If I was going for the perfect Tune and setup this would be one the gun 😎

@@VikingAirgunner Have you though about starting an X/Twitter account? It's taking off now for specialist interests and pays.

@@NickGled Thank you for your advise, but with both FB and Instagram Im all ready fully occupied - and even more than I wish to be 😃

I tried rehab for accessory addition, but it only got worse 😂😂 But hey - why fight it??? 😜 Happy that you are getting good results with the superior liner, but if your addition takes over, you should try the heavy liner 😍 Did you see my video with the extra cf sleeve between the barrel housing and the barrel tensioner? Makes the barrel "solid" 😎

@@VikingAirgunner You make me laugh, LOL. I've delayed the heavy for the last of my fixes LOL, New 700cc coming and... Might even go double LOL. PS Carbon barrel sleeve liner is in the post, arriving mid week. You're a true gentleman, thank you for all your support, guidance and encouragement. Have a blessed weekend.

Temporarily, I used my 500mm carbon sleeve and 3 rings at the port end, still excellent groupings.

@@NickGled Double 700 cc 😍😍 Ohh yes 😎 You are welcome buddy and a great weekend to you aswell 🙂

@@VikingAirgunner One question I have; why not try an extended top rail with barrel suppprts? I have the Sabre Tactical. I'm sure they would help out.

Hi David I cant seem to remember shooting pellets in the M3🤔

@VikingAirgunner Ah you must have meant the JSB 13.43 slugs

@@davidjohnson5369 That must be the case 😃 They usually perform well between 960 and 980 fps. But I also had them doing well at 1020 fps. Did prefer 970 though.

@VikingAirgunner Thank you , I appreciate your help Peter , great video's that you do I've found them really informative . keep em coming 👍

@@davidjohnson5369 Thanks David 🙂 Enjoy your weekend 😎

As Im saying in the video, the AMP works perfect in the M3. Fast and accurate filling with no creep. Some use Huma regulators in their Impacts, but I see absolutely no reason to change.

My guess is that there is some Loctite left in the hole where the probe is attached - or the rotation is off. So either a cleaning of the hole ora 90 degree turn will solve the problem :-)

Good info! Thanks for sharing mate 🙂👍😎

How much pressure 2nd régulateur ?

146 bar ​@@balboaroucky9795