Video

You kept talking about the size of bed slingers, but I did not hear the size of prints this printer makes. I may have missed it, if so, sorry.

Nice review

How loud is would I be able to sleep with it in my room or no

Souped-up Ender 3 with Klipper, input shaping and an accelerometer is king

What happened to that first layer? looks like a gap...

Can you print 3ft or 5ft pipes with a spiral design so we get maximum surface area both inside and out, and one side very porous while the other side is glazed so it is water proof?

As someone who loves tinkering with things, but has gotten to the point where I have more things to do than time to do it, I don't want to tinker with a 3D printer. For some people, it's a hobby. For me, I want it to use a 3D printer to print what I need, then move on. So I don't care about the lack of modding. I DO care about the privacy stuff though. Uggghh!!!

How loud is it should I put it in my room

Do the voltage settings define a specific country or is it intended to operate on 230V ?

An idea to solve the screen is maybe print a bracket to move the screen to the side of the bed with an ribbon cable extension.

bro, what did you do with the PWM signal pin for the power supply fan? the documentation states that it needs 5v and might break if it's overstepped

The Neptune 4 Max has no problem with a speed benchy but does it at 20 minutes (you really need to check layer height and number of walls for a proper comparison). the acceleration is only 8000 but this will print more than twice the speed of the CR M4.

I have this printer and my god it is LOUD. The squeaking at slow speeds is headache inducing.

Think it’s fair to mention it’s under 600 bucks. Pretty tempting, especially when it does look pretty tweakAble.

Have it next to the A1 and P1P. Needed it for the size but straight lined walls are cleaner on the A1 and P1P. Probably because of the wobbly head of the V3 plus. Any change we can change the rods for carbon to make it stiffer like on the P1P?

4kg trashcan. Or $100 trashcan. But cool.

Very disappointed that no fan was thrown over the balcony and replaced by a 4x larger Noctua inserted by force through a nibbler-hacked hole... But, to be fair, within a few minutes we saw drilling into the chassis to relocate the spool 😅 So there's that !

Very thorough video mate. 👍🇦🇺😊

DONT BOTHER trying to get the K2, even if you do, you would still have to wait until september to get it :( No one should wait that long... And chatting to the staff in online chat at creality is liking pulling hens teeth, they told me repeatedle to use google or here is the page, go look at it...

They seem to be stuck in the era of 3D printers being for tinkerers who enjoy tuning flow rates and tightening all the screws. Times have changed thanks to Bambu, and it needs to be assembled and tuned properly out of the box from day 1.

2:36 "He didn't write his name on here, that seems like a missed opportunity" - At the same time, there's a huge raised pod in the middle of the print that says "3D PRINTER TEST by Marian Trpkos". - Am I missing an inside joke here?

they could solve the bed blade issues by putting a long metal tab on the left of the bed. most users are right handed and the screen is on the right side of the printer

How do we mod existing printers with K1C E3V3 series Unicorn nozzle. I would like to thinker with that. I replaced the hotend on my CR-10 SE before but was thinking if i upgrade it unicorn nozzle now there is no blob of death problem anymore

I have to ask if I heard you correctly, you use the 4 kg bin as a bed pan or does that mean something different in the USA ?

Have Creality claimed to have written this new version of Creality print from scratch like they claimed they wrote the first version, but was yet another fork of Cura? The Benchy gets its name from being a benchmark of QUALITY print. I don't see the point of the speed Benchy as you can't really determine the quality. Surely people should be trying to print the perfect Benchy as fast as possible

If creality makes the bed lighter it may lead to warping issues or it would be a very expensive BED slinger.

If the printer profile isn’t in the slicer, did you just edit the bed size in the slicer? Purchased this printer end of week last week and expecting it to arrive end of the week

Yeah I really doubt Bambu LAb is obsolete in fact far from it. Anyway competition is good. Better for consumers and 3D printing is really undergoing a major technological leap at the consumer/prosumer level

Writing it on the print wasn't missed: 3D PRINTER TEST by Marián Trpkoš is what I can see at 2:43

My understanding is the filament run out sensor only detects a change in state so you might not need filament in there at all and or be able to leave it disconnected. I'd love to know the answer for sure. Also, I'm excited about this printer and I want to buy it but I think I should wait maybe 6 months for software and publicly available profiles and tweaks to catch up.

thanks Nathan, very honest review

The under extrusion on the cheater test print reminds me of VWs diesel-gate situation.

Replacing the bed carriage and heat bed with a carbon fiber plate would speed it up a good amount

209 hours on it and other than the noisy stepper driver at slower speeds it has been great.

That thing must be huge to get your head through it. Lol

does anyone know if a even larger version of the Ender 3 V3 is planned by creality? I mean something like 420mm x 420mm which what seems to be a common print bed size as other manufacturers show?

Purge block in 2024??? So you made a product that INCLUDES all the negatives that your consumer base DOESN"T want AKA the puge block and it's included material waste? IF you are coming out with new products make them to move 3D printing forward not maintain status quo ! Literally ZERO advantage for this product over a $179 3D chameleon.........On top of it all you have to lock down to Sovol's print head and Sovol's nozzles forever after this "upgrade" this product is a FAIL!

😂nothing like stabbing an AC bed wire known to fail with a metal object on probably a non RCD protected circuit….. also what a stupid video anyway

You ruined the print quality by moving a 1kg spool on top This massively increases vibrations of the frame

Doing a review of a new printer and you already had to make mods to it, hmm

would love to try out creality prints 5 but no support for cr-10 smart pro or my little ender 3 v2

Looking forward the one and only printer from Nathan in a few years!

Great video! Looking forward to the Mmu3 video. Someone really needs to make a better solution to hold all the filament spools though.

Any reason why I'd buy it instead of SV08?

You seem more mellow.

I bought the K1C .. so I'm good for awhile BUT might also get the MAX next ..lol

i skip V3 and V3 plus, gonna go for K2 max

FYI I just recently got a standard size ender 3 v3, and the top holes for the spool holder are missing on this rev. Spool clamp thing is injection moulded now too.

Looks like what the S1 Plus should have been.

It may just be on my end but your share sale link didn’t work