Video

If you do reviews of tools and you do not know where the play is for stop doing what you do. You’re no tool expert.

Substantial amount of the cost on the magnacut blade (which is kind of useless with the lack of right heat treatment)

Is it just me or does it seem like it would be easy to have, either, a long tool or a short (that is half the size) and have pivots on both ends. That would open the choices up no end. 5 long tools? Okay. 10 short tools? Also okay.

lifetime warranty, works with one hand only, I have a couple of leathermen, but would not mind getting this. If you work in the field, these always comes in handy.

Great overview. Thank you. I thought 3.5mm was the standard mini bit size. That's what mine have been, though they probably came from my old Klein system. I definitely prefer they stick with 3.5. I'm leaning toward this set, though I'm waiting to see what the Icon mini socket set looks like this summer. <edit: just found my other mini sets and they are 3.9 mm, so I'm very confused. The Klein are so much better quality that I'm going to continue to use those, but the electric driver takes the larger set, so I'm slightly annoyed now. LOL>

The smaller bits are to fit into smaller tighter spaces such as recessed fasteners on electronics, fishing reels, folding knives, etc......As others on here have already stated Milwaukee is going 3.5 as well. So pack up all your toys and don't play if you want, I"m actually going to buy 6 of these precision kits one for each vehicle my home and my office.

Leth-A-men?

Way too many functions in one button, impossible to remember all the combinations to get to what you might want to get to, if you don't use certain features at least weekly. More buttons with solve a lot of this. But all of the if you're in this mode and then a double press will get you to this other mode but a single press will take you to the other place, is a ridiculous interface. That's why you don't see that interface anywhere else. Imagine if your car real like that. Lol

My guess is they left those slots in the bit kit empty so you can put the bits that are on the tool in there before using the tool as a hammer 😅

Great value. Thanks for sharing Dom

I'd get 2 even 3 if it didn't have that ugly bottle opener hole!

If you are going to edc all that shit you may as well just get a small screwdriver set for less which will provide more options and take up the same ammount of space.

The only decent flashlights you are going to find at a big box store are streamlights.

Spirit X & Midnite minichamp I use in Urban environments & outrider with pen and firesteel attached for outdoor. But spirit x usually also comes along as a backup.

has anyone found this on amazon? I have literally found exact matches different names of a lot of HF stuff like this on average half the cost

Just bought mine on GP knives. Can’t wait to hold it in person.

At $63 no thanks

Roxon win

Why pay for advertising when you can have youtubers do it for free? 🤷🏼‍♂️

I also have it, the steel and action is awesome. BUT all the edges could be more rounded. If hard using the blade it makes unwanted pressure and marks in your hand. I had to sand all the edges with 240 sand paper.

o light puts these things to shame.

What kind of life revolves around the details of multitools? Must be nice to not have anything truly consequential or seeious to deal with.

It's a dope flashlight but i don't need a spare ass right now 😅

Frustrating when companies list beam distance but not candela.

Is the battery removable or not? It lists the 21700 as "built in" on the website but shows a picture of it removed This light has some really interesting features

Does a 14500 from an olight i5r eos work in the reylight lan? The one with the usb c charging port in the side of the battery

I'm going with the Milwaukee. Saw could be useful, but it looks chincy (as does the whole knife), and why do I need the knife when I have replaceable blade capability.

Try making a comparison of klein scissors vs leatherman raptors cutting non wire products. Would love to see it

can you get a non aggressive bezel for it ?

The Sendy is so so good. I got one in Spey and the Drop Point as well. The Drop Point is about 10% lighter.

I'd love to see non-pliers-based versions of the Flex: (1) Scissors-based - use the same awesome scissors from the Phantom to either: (1.1) Same with giving room for more full-length implements. (1.2) Be narrower/lighter overall by giving up short-length tools. (2) Single-handle - same modular locking mechanism on each end of the handle. This could permit an all-full-length loadout, or allow users to mix and match shorter tools with semi-long tools. I like the flashlight, but it's too wide in the current iteration. If it can be only 2 slots then I'd definitely keep it in my loadout. Maybe side-mount the bulb, or have it fold out. The comb is great. I think I'd want to experiment with the pocket clip in different orientations... Could the hole be added at each possible position on all four scales? Also DEEP carry clip version? I could also see people removing the clip entirely if they intend to keep it in the sheath on their belt, or in a dedicated pocket on a bag. Also, if it doesn't already, could the 2-slot Phillips driver work as a shank for the 1/4-in bit driver kit Roxon sells?

Tempted to replace my current EDC light with this -- thanks for the review.

Unrelated, have you ever used and/or reviewed the leatherman bit adapter kit that clips in around the plier head? May be on the other end, not really sure, i just know its not the sleeve over the philips. I dont really know how to describe it but its similar to how the powerpint can hold bits in the closed position. I see a bunch on ebay and theyre apparently able to be used with a number of leatherman multitools, including the pst2 (which is my first/only, leatherman edc going on 3 years). Anyway, curious about your take on that if you have one. Love all the content, thanks 👍

Bought a crescent set over a year ago, lower jaw broke first time using on a small 10mm nut not rusty or damaged, that sent me in the path and found knipex, carry a 125 or 150 or both daily, have several others and a set of 125 and 150 pliers wrench now, and will not look back

🏳️‍🌈💜

I use two 10x5x2mm magnets (Brand MIKEDE on Bezos) side by side lengthwise on my Power Pint. It works perfect. The magnets don't move. It keeps the Power Pint bit driver locked.

This would’ve been so great or better. I should say if the button wasn’t made of rubber. It’s not such a big deal but I’m moving away from wanting rubber buttons because maybe if you use it a lot in like 10 years that button is gonna be dead or it’s gonna have a hole in it. if you keep throwing it around in a bag with other stuff, that’s abrasive the rubber can wear away. It’s definitely possible to do something like that without it being rubber. And does it matter which side you push the button to get the different settings? It seems like if it was on one particular side or you could only push it in one direction that would be a hassle to always figure out where that side is.

Very cool light. Does unscrewing the tail a quarter turn function as a mechanical lock out? The titanium version is calling me...😂 Edit: website says the 21700 is built in (aka non-replacable). That's gonna be a pass from me in that case.

bump

Very interesting light.

As much electronics as people need/want to carry I think nearly everything should have reverse charging. It should be a USB standard if possible.

Great update. My pair of Flex Tools arrived today, and at first blush, I think they are brilliant. Excited to play with the configurations and put them to work!

Made in Taiwan is > Than China. Support the free nations.

Eye candy!

Where is HF'S GORDON? Love mine.

If this company is just starting out, they really should include various CRI offerings and pay attention to what the enthusiast are looking for.

Looks like a good light especially with those options

Seems cool. I am a huge fan of reverse charging where i can get it

Looks nice, but too blue. Is it available in 5000K high CRI?

Very coop offering. Pretty decent value. Thanks for sharing Dom