Klein Mod Box, One Good & One Bad
Vložit
- čas přidán 12. 05. 2024
- 1/4" Ratchet Set
amzn.to/4bAxu0e
3/8" Ratchet set
amzn.to/4bBd07p
Flip Socket Set amzn.to/3UX2cep
Don't get this! modbox percision driver
amzn.to/44ExHwS
Have a Multitool or EDC Question? Leave a comment and I may make a video on it!
Website: maxlvledc.com
Amazon Shop: amzn.to/3B5kJvr
Instagram: bit.ly/3zndlKR
Facebook: bit.ly/3ITwKWD
Email: mle.collab@gmail.com (no links plz, wont click them)
Maxlvledc is a channel dedicated to exploring the tools we carry every day. I will be discussing bags, flashlights, knives, multitools, pen, wallets, key organizers, pry tools, functional clothing, watches, electronics, and much more. Because I also love to modify these items, there will be videos on tools such as screwdrivers, pliers, scissor, wrenches, and power tools.
I try to read every comment so pls feel free to ask any questions below! Thanks for stopping in!
_______________________
Disclaimer
I will use affiliate links whenever possible. Using these links allows me to continue to make content for this channel. Thanks so much for your help!
#everydaycarry #edc #maxlvledc - Zábava
I thought the whole point of kits was to avoid unnecessary trips to the tool box or truck. Proprietary tools just makes everything more complicated than it needs to be. Imagine explaining to an apprentice on what tool you want him to retrieve.
The new Milwaukee micro driver is also a 3.5mm. I wonder if everyone is going to start switching to 3.5mm.
Is it 1/2….. 3/8…. 1/4… 4mm? Or should it be 1/8 bit size. 3.5mm lol.
dumb...super dumb.
lol someone should sell a jig for grinding bits to size with a dremel or some shit. I don't like the ratcheting stuff because it all breaks. Screw it. Fall into the need a new screwdriver trap. They want a fucking subscription model, the leaderships thinks they are so smart now, that they can make everything a subscription. And just get a little drill from makita, that holds any hexagon or rod, has torque limiting too. just use electricity instead of falling into some clicky-trap. Those little drills are so small now its almost a screwdriver without the stupid cost addons. Like I will just use a fucking motor if you think that you can have me fall into some 1960's spring based shit... those sub compacts are SO good. And for the tiny form factor... those little pen lithium ion battery drills are good, but beware, fragile as FUCK. one 3 foot drop and its toast.... but the basic model without any features (wowstick) is good
3.5 is used for smaller screws in a deep well. com'on guys.
@@wurlabyscott the difference in size is marginal at best. I've literally never seen a situation where one works and the other wouldnt.
That precsion set worked wonders on some fire alarm stuff this week. Highly recommend to other sparkys out there!
My reason for not getting the precision set was I already have an ifixit kit, but this helps reinforce my decision. Thanks!
I would rather have a metric only set of those flip sockets as i never use SAE plus that metric only would hopefully make the cases close to the same size as the rest
The other flip socket Klein stuff is somewhat proprietary, but it really seems like it’s *better*, *unavoidable*, and they use standards when they can.
Like that adapter you want a spare of. It does have a proprietary stat, but it also accepts 1/4” and 3/8” square. They didn’t do weird things “just because”.
I have a set of Wiha 4mm bits that I got over 20 years ago. The ModBox system isn’t great enough to make me forego backwards compatibility.
Great video, as usual. Keep up the good work mate.
Cool how they stack like that. Thanks Dom
Homie don’t play that.
I'm upset, and not just a little BIT!
Hah get it?
I was literally looking for a bit set like that... but not that one! Even the ratchet only takes the proprietary bits? You didn't even teake it out of frustration!
And I'm doing spelling errors of frustration!
3.5mm bits in a holder fit into plastic injection molded screw head wells, the 4mm ones in holder do not.
The whole series of mod boxes are proprietary... you loose or break anything and Klein will make a pretty dollar for replacement.
Klein needs to make a 4mm Precision Driver Set now.
Hey Dom I know you have been testing out the Tale of knives mini bandit 2.0. I was wondering if you was going to make a full review video of it. I have looked and can't find any full reviews of the 2.0. If you do can you please show if the leatherman rachet driver would fit in the pen slot
Gotta do what you gotta do bro.
Actually, I don't think Klein has ever made 4mm bit sets. I've had one of their older precision sets (32717) for a few years, and it's definitely 3.5mm like this one.
does klein sell individual replacement sockets/bits?
So… the 3.5 mm aren’t even loosely compatible with the 4mm? Seems like everything would be compatible from 3.5mm male going to 4.0mm female right?
its quite loose in 3.5mm. the bigger issue is getting replacement bits for 3.5 when 4mm is everywhere.
We call them 1/8 bits. They go with your 1/4, 3/8, 1/2, 3/4…. Etc.
@@maxlvledc it definitely seems like a move to proprietary but that’s just so incredibly weird it makes me think there must be an explanation
@@LordThree they want people on a subscription model, like every company. its the latest fad for companies to do. It basically means
1) fuck innovating
2) fuck R&D
3) just keep selling the base product line even more
Imagine they had to figure out some new contraption
@@cdrom1070 well…
That also isn’t a new thing. It goes back to the “right to repair” laws put in place during the first half of the last century. I see it’s not exactly the same these days but I take your point. 🤷🏻♂️
What watch are you wearing in this video?
its the Vaer Field watch. did a whole video on my current watch collection last Friday.
@@maxlvledcThank You!
@@maxlvledcDo you have an affiliate link for the watch?
@@maxlvledc Yes, I agree. Damn nice looking timepiece.
You are 100% CORRECT on the 3.5mm bits. It’s BS.
Think generic, it create solutions.
The 3.5mm game Klein is playing totally stops me from buying their micro bit sets. What are they going to make next - 🤡A 5/16" square driver set🤡
yeah that 3.5mm SUCKS!
and NOT a fan of ball-detent bits either
the handle should be responsible for holding the bit
there's that little groove in short bits & that big hollow in the longer bits
the handle should have some kind of locking mechanism and/or magnet
then there's magnets...
I've been having older magnets de-chrome and then they turn to magnetic dust
NOT a fan of magnets anymore
they want you to pay a tax with their product. you pay more for the thing you commonly lose and never maintain (lubricate,clean... bits??!). the driver you might maintain. that means it might last a while. this means that the company will not get tax from you. you see the bit is perfect for getting wet when you work on wet shit, so the spring rusts away. if you think magnets are bad, their 100x better then springs. i sit all those cup things upright and pour oil in em every year
it took a genius burglar to figure out how to make something as fucking solid and reliable as a drill bit have a weak point in the form of a tiny low quality spring. you see watson, they want to turn a screw driver into a printer ink cartridge
and for repairing magnets, just drill it out a bit and glue in a magnet with loctite prism glue (meant for magnets) after you clean it out in the ultrasonic and dry it off good
Let's be real...this is Klein's attempt at making a proprietary hand tool ecosystem, so that you're attached to your sunk cost and convenience like a battery platform.
is anyone getting paranoid that manufactuers are focusing on the 'satisfaction' of actuating a mechanism vs the actual function, form and quality of the tool recently? I think those videos that always brag about the 'click' or whatever being 'satisfying' and being a sign of quality? Like, I noticed they are using soft materials and playing all sorts of physics games to give it some kind of 'toy' satisfaction... but it has nothing to say about the durability of the mechanism, and usually it involves cheap poorly tempered low quality rust prone springs. I almost feel smart now, when evaluating a tool, to list any thing related to good tactile sensation for 0.1 seconds as a con, because it seems engineered at a detriment to other features. Kind of like soft grips used to be, we know now basically it turned into a rancid shit storm (seriously, it decays and smells like bodily things). the next generation of tool repair is going to be like fucking dentists fixing cavities with springs in them, instead of coating experts. IMO say NO to this CRAP. I am not saying something like low vibration or good ergonomics, I mean literarly when people talk about the "click". I heard people talking about those clicks like their addictive too, meaning companies want to push it. Like OK, so we add dampers now for no god damn reason other then to make you happy for 0.1 seconds and then rage when it breaks and your out 50$. Lets also put plastic in it for no reason other then to mellow out the mechanism that you deploy once a month. yeah i wanna pay for that. How about I save the money on the tools, and buy a toy for myself to satisfy any mechanical related urges. I don't need a fidget spinner stress toy in my basic hand tools... seriously I feel like im getting ripped off by this shit
This dude returns so much stuff. Maybe do your research before hand.
I do? source?
I think he likes to show you the tool good or not. Now that you've seen him find out you don't have to.
@@maxlvledche just doesn't get it. I appreciate you showing these tools
this dude is like a land mine detection crew and your complaining???????? u work for klien bro? my hats off to the poster of the video for detecting corporate scumbagary and keeping money in my wallet.
People like Dom go to the time and effort and then film the results SPECIFICALLY so that the rest of us don't have to. That's the job description.