![Turnbull Garage](/img/default-banner.jpg)
- 153
- 297 373
Turnbull Garage
Canada
Registrace 3. 06. 2018
This channel will have content showing engine overhauls, maintenance, racing and who knows what else. Specializing in Ford and Kei trucks.
Want to contact me? Shoot me an email at TURNBULLGARAGE88@GMAIL.COM
Want to contact me? Shoot me an email at TURNBULLGARAGE88@GMAIL.COM
Torque Masters Sidney Show 2024
In this video I share some of the sights at the Torque Masters Extravaganza 2024.
contact me at turnbullgarage88@gmail.com
Degenerate Blues by Alexander Nakarada | creatorchords.com
Music promoted on www.chosic.com/free-music/all/
Creative Commons Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/by/4.0/
Slow Burn by Kevin MacLeod | incompetech.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/by/3.0/
contact me at turnbullgarage88@gmail.com
Degenerate Blues by Alexander Nakarada | creatorchords.com
Music promoted on www.chosic.com/free-music/all/
Creative Commons Attribution 4.0 International (CC BY 4.0)
creativecommons.org/licenses/by/4.0/
Slow Burn by Kevin MacLeod | incompetech.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/by/3.0/
zhlédnutí: 202
Video
Replace 2001 Ford Ranger door switch
zhlédnutí 63Před 21 dnem
In this video I replace a broken door switch. Should be same procedure for a B series Mazda truck. contact me at turnbullgarage88@gmail.com
Ford Ranger headlights not working
zhlédnutí 86Před 28 dny
A quick video showing what I found the problem was with the headlights on this 2001 Ford Ranger. Will be the same for the Mazda B series trucks. Contact me at turnbullgarage88@gmail.com
Canada Day Mower Race 2024
zhlédnutí 650Před měsícem
The great Canada Day mower race. Unfortunately I was a spectator this year, still just as fun, enjoy. contact me at turnbullgarage88@gmail.com Music track: Metal Is Trash by Pufino Source: freetouse.com/music Vlog Music for Videos (Free Download) Music track: Energizer by Aylex Source: freetouse.com/music Music for Video (Free Download) Music track: Rock Me Now by Pufino Source: freetouse.com/m...
We take on Area 27 with our Mustangs
zhlédnutí 209Před měsícem
In this video I showcase our experience at Area 27. I have my 2022 Mach 1 and the wife drives her 2015 Mustang GT contact me at turnbullgarage88@gmail.com Get your track decals and all other decals at DecalsHut.ca Use discount code Turnbull Garage to get 10% off!!
Track prep Mustangs for Area 27!
zhlédnutí 152Před měsícem
Bit of a long video covering me getting his and hers Mustangs ready for Area 27. For your sticker needs go to DecalsHut.ca Enter code "turnbull garage" for 10% off your order! contact me at turnbullgarage88@gmail.com
2017 Mitsubishi Mirage clutch cable replacement
zhlédnutí 197Před měsícem
In this video I replace a badly designed clutch cable on a Mitsubishi Mirage. Contact me at turnbullgarage88@gmail.com
6F35 transmission stripped oil level check hole
zhlédnutí 413Před měsícem
In this video I show how to deal with a stripped oil level bolt in a 6F35 transmission. This was out of a 2013 Ford Escape Contact me at turnbullgarage88@gmail.com
3.0 Ranger valve cover gasket replacement. Happy Father's Day
zhlédnutí 532Před 2 měsíci
In this Father's Day video, my son and I tackle leaky valve cover gaskets in a 2001 Ford Ranger 3.0. Should be the same for a mazda B3000. Contact me at turnbullgarage88@gmail.com
2006 Mazda B2300 fuel filter change
zhlédnutí 96Před 2 měsíci
In this quick video I change out the fuel filter in my 2006 Mazda B2300. Will be same for a Ford Ranger contact me at turnbullgarage88@gmail.com
Garage update, gokarts and car collection
zhlédnutí 62Před 2 měsíci
Bit of a mix of stuff for this video. No real projects on the go so showing some stuff ongoing and some fun stuff. Contact me at turnbullgarage88@gmail.com Music by czcams.com/channels/s0rg_pLuPsKMr2vk2ETADQ.html
2024 Comox Airshow
zhlédnutí 226Před 2 měsíci
In this video I take you along for a ride to the Comox BC Airshow. contact me at turnbullgarage88@gmail.com
Polishing exhaust tips on 2022 Mach 1
zhlédnutí 210Před 3 měsíci
Quick video showing how easy it is to polish up the exhaust tips on a new Mach 1. contact me at turnbullgarage88@gmail.com
Racing mower engine destroyed! Podcast is here!
zhlédnutí 261Před 4 měsíci
Racing mower engine destroyed! Podcast is here!
1992 Mazda Miata fuel pump replacement
zhlédnutí 301Před 4 měsíci
1992 Mazda Miata fuel pump replacement
2002 Suzuki Carry rescue part 15, complete!!
zhlédnutí 194Před 5 měsíci
2002 Suzuki Carry rescue part 15, complete!!
Mach 1 Mustang custom front plate mounting idea
zhlédnutí 128Před 5 měsíci
Mach 1 Mustang custom front plate mounting idea
2002 Suzuki Carry Rescue part 14, a few loose ends.
zhlédnutí 198Před 5 měsíci
2002 Suzuki Carry Rescue part 14, a few loose ends.
2002 Suzuki Carry Rescue part 13, the test drive
zhlédnutí 226Před 6 měsíci
2002 Suzuki Carry Rescue part 13, the test drive
Suzuki Carry Rescue part 12, its alive!!!
zhlédnutí 176Před 6 měsíci
Suzuki Carry Rescue part 12, its alive!!!
What all do you have done to the engine and exhaust on this little truck?
@@derickdoveglass engine is stock, just a rebuild. Exhaust is a 2” pipe with a stack. It has a glass pack and a resonator that I custom fabricated.
unless that oem Ford mount was bad you should have put it back in. Aftermarket motor mounts are not made as good as the originals!!!
I agree 100%. I will likely order Ford mounts and swap out. Second time around always goes quicker.
nice job man
I have an issue with my subaru sambar 1998, There is light in the front headlights, but when i turn the keys nothing happens, no electricity. What could be the problem?
@@matsuyun4767 check the ground wire from the frame to the valve cover
what lift did you use? did you have to cut and extend the steering wheel?
@@SargonRose I made some 2” blocks myself and also bought a 2” lift kit for a full size truck at a garage sale cheap and used some of the blocks. Yes, had to cut and extend the steering shaft 2” as well.
Look like it was a good day out! Looking forward to next weeks track action!!! All the best, have yourself a great day!!!
I think you're a dumbass.
ah wrong 2.3L. Shoot. Well I hope the 93 aint this hard to do.
I would think it is the same.
@@turnbullgarage88 Lot easier from what I can tell. 3 bolts unbolts a brace for the bottom all accessible without removing all the suspension stuff.
Hello from New Brunswick. As a former Mustang owner I envy you for this ride. Happy motoring!
Thanks. It is a great car and really enjoying track days. I use it for what it was designed for.
Will be doing valve cover gaskets on a Mazda B3000 in a couple weeks and this video definitely helped in understanding what will be involved.
@@SgtKilgore406 cool, thanks!
The Sambar has more cab room than any other Kei truck.
@@mightyangelopenbook8555 yes that is very true.
For the record, the Subaru and Suzuki both have options for round or square head lights. Also carburetor or fuel ejection is available in both. My 1999 Subaru Sambar has square lights with fuel injection and my 1996 Suzuki Carry has round lights with Carb. There are a half dozen different makes of these and there are good reasons to get any of them.
Great videos! I have a 2016 with 17k miles and my clutch pedal got stuck to the ground once. Think I’ll go ahead and just replace the master cylinder. The McLeod clutches really no good? My car is stock now but I have to supercharge and run around 700hp.
Thanks, but these videos were poorly done as I didn't do any editing. For road course track days my new McLeod clutch was done due to the warping of the floating plate. For normal spirited driving I am sure it would be ok. Super light pedal but a little noisy at low RPM in gear.
Just finished watching the series on the Carry rebuild, very informative and it was excellent work on the rebuild and everything else that went into documenting this. I just bought a 2000 Carry and am waiting on its arrival to me here on the Olympic Peninsula. I agree with your wife, the new intro is great! Thanks so much for doing this, very much appreciated.
@@jeffreypursley1914 thanks man! Glad you enjoyed it and learned along the way. Enjoy your soon to be cool ride!
Do you have to drain all the fuel in the tank?
No, not at all. Just loosen the fuel cap so no pressure builds that can slowly weep fuel out of the line.
Top tip. Invest in decent tools. The tool you are using will ruin fasteners sooner or later.
Curious which tool you are talking about.
@turnbullgarage88 Your ring spanner has incorrect shape. No wonder it doesn't fit properly. Should be illegal to make and sell such tools.
Ring spanner, must be from UK. I’ve had no issues with my tools and stripping of bolts is not an issue unless they have been severely rusted. 45 years of using tools I consider myself to be somewhat proficient. Thanks for the comments and suggestion.
What is the mileage on that engine???
At the time of the rebuild, around 115k kms.
@@turnbullgarage88 Probably didn't get regular filter and oil changes
@@tedd1091 probably not.
you can use a rubber mallet to cut masking tape off the top of the block
@@PanionCube yes, very true. I did that during my apprenticeship many years ago. I need to get a rubber mallet, it would be way quicker.
This video was of no help for the 1999 Sambar. We need a lot mor videos spacificaly for the newer body Sambar as there is nothing. I've been battleing this for hours as a mouse has crawled up in my dash and died. It stinks! But I have 1 little thing I can not find for the life of me that's preventing the complete removal and now I've already broke 2 things trying!
Unfortunate! If I get a newer ride one day maybe I will dig into it. Good luck.
@@turnbullgarage88 Thanks. It's hot as hell and aggravating to the max. I believe I need to pull the bottom steering column off but there are 4 screws. 2 were easy, the other 2 are recessed 4" deep with a 1/3" hole to get a screw driver in but not be able to see or get a grip. I'm no little guy, that's why I gave up the previous body style and got this bigger cab, so this kind of bending over in the heat out in a stuffy garage and smelling rotten maggot mouse and breaking parts is enough to make a guy go insane! lol
@@turnbullgarage88 Oh, and mine is for sale =) lol W put it up on ad when my neighbor put up his $26k Daihatsu Jumbo cab 4x4 with 2k km up for just $16k. I wanted it so bad but needless to say it sold in like 2 seconds. =(
where did you get the inductive pick up at.
Number one spark plug lead.
did you buy the inductive pick up kit and where
I have had that timing light fir 25 years
Hey Turnbull! Looks like you both had a great time!!! Great coaching, encouraging, and not overly demanding! Your bride did Fantastic for her first time on road course!!! Love the enthusiasm!!! As we both know, knowing the line and driving the line can sometimes differ! #SeatTime!!! Hahhaa!!! Hope to see you both do it again soon!!! All the best!!
Thanks! There will be more for sure.
Hi Richard. M1Fan here (forum pseudo) with the fuel pump issue. Thanks for sharing your adventures once again. Love the format. You are getting very good at editing nd narrative. Smart move to travel one day ahead of the event. Looks like you and Jenny made the best out of it with the road incident. So awesome that you got Jenny joining you as a passenger first and now, into actual track driving. Beautiful track, elevation changes, banked turn, and landscape to start her off. She is a good sport! Could see that she was gaining confidence already at her second session. Very cool! You had better lines than the V8uù Camaro and it took the stubborn driver a while to point you by...
Thanks for the comments and watching a long video. Yea she is pretty cool. She has ridden shotgun on track since our blind date 12 years ago. Now she got a taste behind the wheel and loves it. I created a monster I think.
Couple of those brackets looked like a big pain in the ass my son has the exact same vehicle that needs the timing belt change no water pump leak but will change it also but the coolest thing about this video is working with your son.
I enjoyed your video and driving and the track looked really awesome! On the lap timer, do you have to manually reset it after each lap. Thanks!
Thanks. Yes I manually hit button at the start stripe. I am editing a new video now with a better camera set up. Just got back from another day at Area 27.
Good video! Car sounds great.
Hey thanks Craig.
I'm a month out from getting my sambar dump and has no ac. Gonna retro a universal hotrod system in it..... definitely will hate life getting the cluster out but more so I'll have to take the brake fluid reservoir out
@@padigadiga reservoir doesn’t need to come out. It unscrews from the dash and can stay in place.
Hey Turnbull! Good stuff! Always better to do the work/prep Prior to the Track Day!!! Many have their day shortened because they defer maintenance/prep!!! Safety equipment is Always authorized, nice helmet Mrs. T!!! Wishing you both a great track day!!!
Do you change the alignment every time you go on track? I currently autocross my Mach1 and the swaps I currently make are tires only. How quickly have you been able to swap the alignment change?
Yes. Takes 5 minutes per side. Just jack front corner, loosen upper strut mounting bolts, slide strut inwards to the stop and tighten strut bolts. Toe is likely impacted slightly but I’ve had no issues. I plan on putting it on an alignment machine to see what effect it has on the toe.
@@turnbullgarage88 Awesome, thanks for the response. Looking forward to that update.
Great! Tks!!
Ive heard they always will break at somepoint and to put one in the trunkwell...
Crazy. It is a cheap car, but come on....
Hey Turnbull! A dad's work is never done! Hahahaa. Good job fine sir, quick job and rewarding... helping out a young person!!!
So true. Easy fix and helped a great kid that is struggling to pay rent.
Is the other one on the other side cracked to. They are not supposed to to be cracked.
Just one was cracked and was replaced.
Three balls only
Do you have to undo the ac lines to remove the transmission
If you remove the engine like it did, yes. If you drop just the transmission itself, no.
Dangit, I was really hoping there was a trick for getting around that spring :) ah well
Me too brotha!
Thanks for the product tip. Picked some of this polish on Amazon and cleaned my tips Saturday and they came out great!
Would a magnet along with the grease 1-2, turn at a time be cleaner?
It is aluminum, non magnetic.
Hey Turnbull! Always good information! Have yourself a great day!
Very educational. I cannot wait for my Subaru Sambar to arrive from Japan, very exciting.
Good morning, I ordered and purchased a Subaru Sambor a week ago from Japan. It arrives in August. I am so glad I found your channel, just subscribed etc. Awesome.
Hey thanks and congrats! Lots of info on my channel for sure. If you are on Facebook, join the group Sambar Squad, there is a ton of helpful stuff and people on there too.
Love the Dad & Son Garage stuff!!! No better day than today!!! #Happy Father's Day!!!
Is possible for me to know where I can buy the screws for close and tie the gasket set of cover block?
Don’t really understand what you are asking?
So we just get to guess if problem solved.
Stand by for follow up video. So far both issues have not come back.
Enjoy watching you doing 'Garage' things! All the best!
Tks!!
Good God - you have the patience of a Saint - - - I'm enthralled by your perseverance and am so glad you've additionally included the oopsies and additional sticking points - - this should have a million views . . . you're a good dude . . .
Ha, maybe a crazy dude lol. Thanks for the comments, much appreciated.
Hey Turnbull Garage! We like see what you got going on regardless! Sorry about the Escapes Trans...Again! All the best, Have a great day! Hahaaa!!!
Owe you a hat! Email me, my contact info in the video description.
@@turnbullgarage88 Emailed! Let me know you received it... All the best!
I've found if you don't put any lube when checking clearances, the plastigauge wont stick as bad and its easier to wipe off if it does get stuck to the part. As long as you're not spinning the rods or crank without lube (which you shouldn't be if you're just checking clearances), you should be fine with the metal on metal contact. Can't wait to get my Sambar soon!
Good to know. Thanks for the comment. Good luck with your Sambar!
Thank you man, the lighting and editing is brilliant 👍
great video. thanks for the info!