Video

I’m looking to replicate this. I dug into the wiring to the white led lights you can turn off/on and see the wiring is putting out 12.9-13volts, but the gauge of wire is so small I’m sure it would burn up with the sprayer motor. Mind sharing what you tapped into to power your sprayer? Also, that connector/plug is cool! Where did you find that? Thank you!

Can you please provide the link to the control board

couldn't you just plug this straight into a raspberry Pi?

Did this work with attachments?

I’ll buy it from you lol how much

Very nice walkthrough - Thank you! For me, the whole appeal of using the MyxFitness monitor is the touchscreen. As you said, perhaps a raspberry pi would do the trick, but without touchscreen functionality it doesn't seem worth the effort for me to do the conversion. I am thinking about just buying a small smart TV and mounting it on the bike's existing 100x100 VESA mount. One step, and the problem is solved. It's also easy to reverse if I want to ever sell the bike. Alternatively, for those on a tight budget, the MyxFitness screen could be sold on eBay to pay for the Smart TV that replaces it. It may be possible to find an Android-based smart TV that also supports ANT+ natively. Then sensors like heartrate, cadence, speed, etc. could be paired with it and used with sideloaded fitness apps. But, barring that, casting from a phone or tablet to the smart TV is a dead simple alternative. It would be cool to be able to run stuff like Zwift on my myx bike, lol. Thank you again for taking the time to share your conversion with us. It opens up a lot of avenues for exploration. Personally, I don't really want to ruin the existing monitor if I don't have to, and will probably just grab a cheap smart TV for my bike.

Can you please provide a bit more instructions. what do we do after buying the board??? how is it installed??

Thank you for all the great info! These guys should endorse your videos for doing their job 😂

Hi where is the confirm button located?

Very helpful video, we had some exhaust codes and it may just be the baffles need cleaning. Thanks so much

Do you have a link to those ash trays I like the idea of them

Thank you! I did not know those panels came off. My stove does not have those give away knobs on the panels like yours does. You're a life saver!!!! 👍👍

Hi! I re-watched your video for monthly clean, which is currently what I do for weekly clean. My question is when should I be using this snake with a brush on the tip? Should I be snaking this up the hole or trying to clean the vent?

Can you still use all of the sensor data from the bike with other apps with this mod?

How do you know if the igniter is bad or it’s something else

My pellets don’t ignite the igniter has worked all last winter and up to now it’s been great then the igniter is not getting hot. I have to start the fire manually ! I don’t know how to keep in manual, when it turns off I can’t restart it.

Thank you forbthe video, the owners manual doesnt help much with understanding the control panel. My issue is i have this pellet stove in the video, my house is about 1000 sq ft. I set my heat dial to 60 and my stove temp in the center of the display reads 80 (room temp). Its set on eco 2 and P4.. is there something wrong here?

Can you send the details please!! This is awesome!!!

How did you do this? Would love to figure it out!

How do you suggest clean the vent pipe from the square hole there out

Thanks my guy, the manual leaves a lot to be desired. Just got one. Caught the comment on only being able to change between eco1 and eco2 when shut off. Good info!

I'm getting a code 5 and I've cleaned everything including the inside back 3 panels and exhaust pipe. Any suggestions?

I cleaned the back panels and everything and now I have a code 5 that won't stop.

Question about "Status" Exhaust fan at 0rpm and what about a code for system?

Hi, does anyone know how to reset this machine to factory settings? I have listened to NO make any changes to system settings, but I did some, and I want to get back to factory settings. After I made those changes, the machine started working differently. TIA.

After watching your video pulled the back panels behind the fire pot. Couldn't believe how much was built up. Running so much better, thanks again.

Stumbled across your channel. Great tips, thanks. Your stove seems like a similar setup as mine Cleveland ironworks 130. Again thanks for the insight.

We can’t seem to figure out what’s going on with our Grand Teton stove, it’s like it’s throwing a lot more pellets and it’s filling the pot quick. We have cleaned it and reset it many times. Any suggestions?

Thank you so much. As someone who is a visual learner, these two pellet videos have been soooo helpful!!!

I don’t usually comment, but I just bought this unit and I’ve watched the video several times. Thank you for making it!

I just installed the same model. your breakdown was really helpful. The manual doesn't give you this information. Thanks for taking the time to break this down for other pellet stove owners! My thermostat setting doesn't activate the stove when it reaches the set temperature, any recommendations?

Any knowledge on the vacuum switch? I keep getting error code 5

Good video !!!! Thank you

Thank you it was a great video on this stove.

Can a dirty stove cause the E5 code?

From personal experience I purchased the stove October 19th of 2023. I started it about 3 weeks ago and it seemed to be doing really good. I noticed that i was getting electric shock everytime I wanted to clean it even when I had it unplugged. Now, this is the bad news about this Grand Teton stove: Sunday morning about 3:00 am we woke up because the cold temperatures creeped in the bed with us, I checked the Stove App on my phone and nothing seemed wrong and then we noticed a really strong smell in the house. We got up and the stove was not working the control screen was completely off and will not turn back on.. the Stove was totally dead. I investigated the problem and it turned out the fuse in power switch was getting blown everytime I put a new one in... Ok, here comes the fun part: I had to wait until today Monday the 18th of December because their customer service dont work or answer their phones on Sunday. After about one hour or so waiting for someone to answer the phone a lady come on and from the get go after I explaind to her what happened she answers by saying so what do you want me to do? I told her I needed the stove to run as soon as possible because my house is freezing and more cold temperature is on the way and that I am almost 60 years old diabetics and just had an open heart surgery so please what ever it takes to get my stove going will be very much appreciated. She put me on hold and came back saying that she will send me a power cord, a mother board and combustion chamber and that I had to find someone to take the old ones out and to install the new ones in.. I asked her for a confirmation email or anything to refrence this call or a tracknig number, she declined to provide any information what so ever and she was threatening me of canceling the order and to take it with the Tractors Supply store which she has nothing to do with.. Anyway the Customer support is really really bad and really made me regrets buying this pellet stove.. I will never recommend this stove to any one because of their customer service.. things break down but customer service can make a bad experience less painful but not with this Company Stay a way from this stove...

Thank you

hello I just bought this machine and called a miele tech to come fix it. I know it needs a new percolator which i plan on buying he was so rude long story. I think it just needs a good cleaning. would love to pick your brain more...I have no idea how to break it down and grease o-rings etc. but willing to learn-will u help me?

How do you set the damn thing where it kicks off at the temp you want and then turns back on

Great video. I read the whole manual that came with our Grand Teton (PS130) and nowhere did it tell us to do this. I kept telling my husband that there were openings at the top of the plates and ash must surely be going behind there. Thanks for the instructions!

Good info video. Would like to know if that thermostat wire on the back could be wired into a digital wall thermostat.

Same exact one I have ! Thank you, so helpful!! 🤩 For some reason my pellets keep flying out of the burning pot when they’re being dropped, any way to stop this? Also, struggling to understand my pellet stove on eco2 , and the exhaust levels needed as well as my blower. I don’t understand how they work together to adjust my levels. Pellet stove was handed down to me . 😅

Same exact design as my masterforge 140xl. Great info thank you!

Watching from France and new owner of a pellet insert. Inserts are a bit more tricky to feed and clean as everything is squashed in the chimney breast, still getting to grips with cleaning. Mine seems to produce of a lot of ash so daily clean is a necessity, the back plate is fairly awkard to remove so for now doing it monthly unless the insert starts having lots of misfiring. Thank you for all the explanations which I found very useful.

Hi. We're thinking to buy the pellet stove like your video. I wonder if this is a good stove and good heat. We currently have no heat in the house and we're living in the cold areas. Thanks

I just bought a Grand Teton after having a Harmon for 20 years. Man, I miss that Harmon….

Nice video, especially covering the "Settings". Quick question, just started mine for first time, following instructions to burn off the oils and cure the paint (smelled bad w/smoke). I noticed the paint flaking off on the metal plate in the middle above the burn pot where the pellets drop from. Hopefully the stove performs good, not sure of quality with the paint flaking off this plate, apparently the metal is not prepped correctly for the retention of the supposedly heat resistant paint? I would post a picture but don't appear to have the ability.

great video im going to tractor supply tomorrow to get a grand teton gros ventre tomorrow due to the sale they have on them and my 20 year old pellet stove is ready to be replaced

Thank you for another great & very informative video. Just curious, what ash vacuum did you use before this new battery operated vac ? I'm thinking of getting the Cleveland Iron Works ash vac sold @ Tractor Supply because I can get it for free with my T.S. reward points but I haven't seen any reviews on it.

Thank you so much for a great video, AND you have great timing too; I'm installing a Grand Teton Gros Ventre pellet stove today.