![Ride and Grill](/img/default-banner.jpg)
- 30
- 70 933
Ride and Grill
United States
Registrace 10. 11. 2022
Follow me as I cruise around, review various motorcycle related products, and spark up my smoker to make a brisket or two. We may even bake some sourdough bread or other deliciousness.
Removed HD Fork Wind Deflector/Fangs. BIG MISTAKE
After 2 years of riding with the fork mounted wind deflectors, I decided to  take them off.
Don’t make the same mistake I made 
Don’t make the same mistake I made 
zhlédnutí: 13 456
Video
Bird single flap takeoff like a Jet.
zhlédnutí 1KPřed měsícem
While reviewing one of my cameras, I caught a bird taking off with a single flap. It looked like it was being pulled by a string.  The only editing was zooming in, shortening, and slow motion.
Check Out The Arlen Ness 10 Gauge Shift Rod / Shifter Linkage
zhlédnutí 1,7KPřed 2 měsíci
This is not an installation video, it’s just taking a look at the Arlen Ness 10 Gauge shift Rod compared to stock on a 19 Road King FLHR
Unboxing Eldorado EXR Open Face Helmet from Australia | Super Low Profile
zhlédnutí 867Před 2 měsíci
The Eldorado EXR is absolutely the lowest profile and lightest open face (3/4) helmet I’ve ever tried, that’s not a novelty helmet. The fit is amazing. I wear a medium, intermediate oval helmet with a head size of 56.6cm. www.sharkleathers.com.au eldoradohelmets.com
Rustic Crusty Italian Bread. Easy No Knead Recipe
zhlédnutí 111Před 4 měsíci
Total ingredients needed: 3g or 3/4 tsp dry active yeast 5g or 1 tsp sugar 425g or 3.5cups bread flour 75g or 1/2cup wheat flour 360 mL 1 3/4 cup (minus 3 Tbs) of water 14g 2tsp 1/4tsp (even, not heaping) kosher salt. Do not use table salt Biga: Add 3g (3/4tsp) of yeast and 2.5g (1/2 tsp) of sugar to 100mL (1/2 cup) of warm water (microwave about 15 seconds). Let yeast bloom. Once yeast is read...
Smoking Brisket Flat Days Before and Reheating, JUICY & TENDER 
zhlédnutí 97Před 4 měsíci
Smoking and reheating instructions below :  I’m smoking a brisket on Friday for Easter Sunday. I’ll show you from start to finish how to season, smoke, and reheat that brisket a few days later so it’s still tender, and not dried out. It’s super simple and a lot easier than trying to time when the brisket will be done and went to serve it. Smoke it when you have the time and serve it when you n...
Bought New Biker Rings. Each explained + sizing tips
zhlédnutí 285Před 6 měsíci
I decided to buy some new rings and wanted to do a video explaining the reason, and meanings behind what I’m wearing.  The meanings are personal and could differ from other peoples interpretation. I also offer a couple quick tips on ring sizes when buying online.  gthic.com
McDonald’s Copycat 2 ingredient HOT MUSTARD. Fast! Easy!
zhlédnutí 153Před 8 měsíci
I figured this out on accident when I accidentally put horseradish sauce on a sandwich with honey mustard.  I recommend using Thumanns real honey mustard , and blackbear or Thumanns horseradish sauce. Start with equal amounts of each and then adjust it for your taste buds. 
I don’t brine Turkey anymore. Maybe you won’t either.
zhlédnutí 26Před 9 měsíci
I used to do both wet and dry brines on turkey for years, but not anymore. Because I’m looking for a more traditional and natural turkey flavor, I opted to stop. I feel that brining makes turkey taste too much like deli meat. Proper cooking technique is enough to keep the meat moist.  marsridegrill@gmail.com
No Knead Sourdough Rye, Full Flavor Perfect For Sandwiches
zhlédnutí 1KPřed 10 měsíci
Feed your sourdough starter. Allow it to bloom and become fully active before starting. Once it’s ready, proceed with recipe. Pro tip: for a little extra flavor, try replacing some of the water with dill pickle juice. Just make sure your total liquid is still only 325 ml or grams (with liquids, milliliters and grams are the same thing). In a bowl add dry ingredients. *325g bread flour *125g li...
Smoked Pork Butt Rub,Wood,Temp info. EASY! Description for recipe. 
zhlédnutí 68Před 10 měsíci
Here’s a super simple and easy way to smoke a pork butt for pulled pork. 1- Preheat smoker to 210 using your favorite wood. For this smoke I used Apple and Fruitwood. 2- While you wait for the smoker to come up the temp:  Trim off any excess hard fat on your meat.  Hard fat will not render. 3- rub meat with a light coating of mustard and coat well with kosher salt and your favorite rub. I us...
No commentary short ride testing DJI Action 3
zhlédnutí 52Před 11 měsíci
Short ride to see what settings work for me on the DJI Osmo Action 3 Cam. I know some parts look a little rough, so I'm trying to find the right frame rate and stabilization settings. Recommendations on frame rates in the comments are welcome. Current settings: auto shutter, auto white balance, 4K, 30FPS, Rock-steady .
PreFilter Rain Sock for S&S Teardrop. Should you?
zhlédnutí 1,4KPřed rokem
PreFilter Rain Sock for S&S Teardrop. Should you?
Grilled Corn On The Cob No pre-soaking Super easy
zhlédnutí 4,8KPřed rokem
Grilled Corn On The Cob No pre-soaking Super easy
Easy Marinated Grilled Chicken Southwest Style
zhlédnutí 128Před rokem
Easy Marinated Grilled Chicken Southwest Style
Checking out the Harley Helmet Lock & Stand Coaster
zhlédnutí 2KPřed rokem
Checking out the Harley Helmet Lock & Stand Coaster
2004 Yamaha Road Star Midnight Silverado
zhlédnutí 1,9KPřed rokem
2004 Yamaha Road Star Midnight Silverado
Propane grill regulator leaking? Watch this before you buy a new one.
zhlédnutí 32KPřed rokem
Propane grill regulator leaking? Watch this before you buy a new one.
1970 E-Body Plymouth Hemi Cuda $2.2 Million
zhlédnutí 562Před rokem
1970 E-Body Plymouth Hemi Cuda $2.2 Million
Short Ride In Lower Hudson Valley NY with Old GoPro3
zhlédnutí 34Před rokem
Short Ride In Lower Hudson Valley NY with Old GoPro3
For me, it was the regulator. It's a slower leak though
Yep, that's the reason I bought mine, as I ride the highway a lot. Got tired of getting beat up by the wind. Makes your eyeballs bounce in your head and that sux.
You’re the man!!
Thank you!! And thanks for watching.
And talk about the looks looks beautiful. I have a 2012 Road king with fangs.
Nice! I do like the look of them too.
Hi, did your glasses fit ok?
Yes, no issues. I have a pair of WileyX Omega sunglasses that have a medium-large frame and they fit fine without pushing down on the bridge of my nose. If you saw one of my other videos, I talked about wearing glasses with the Bell Custom 500 and how there was no room.
Yup, worked thx.
You’re welcome! Thanks for watching.
You realize those fangs also block wind to the motor which causes it to run even hotter than it normally does which will lessen the life of the motor. How do I know this? I had them on a 2012 Softail and tested it with an oil tank cap temp gauge with them on and off. Do a internet search and you will find plenty of others with the same result.
Oh yeah. I’m well aware about the temps. That was the main reason I wanted them off. Because you used them too, you also can feel how hot your right leg gets. That’s a pretty good indicator of the temps. I’m probably going to get an external fan and see if that helps. But for now, I need them for long highway rides because of the helmet buffeting.
If you dont like wind drive a car
Not every bike needs fangs but Road Kings certainly benefit with them.
Yeah man, I really wanted to take them off to get more air on me and the engine. But the helmet buffeting is the worst. It’s the only bike I’ve ever had this problem with.
@@rideandgrill when we first got our 05 King it had no fangs and a tall windshield that appeared to have been cleaned with steel wool. Couldnt see through it and the buffeting and wind noise was intolerable.
I have a 2000. Black and red, real similar to yours. I don’t have fangs but I do use the windshield when it’s really cold. I haven’t had any problems with wind buffeting unless I’m wearing a 3/4 helmet. With my full face it’s super smooth
It’s funny how some people get it the noise and buffeting, others have no idea what we’re taking about.
If I went full helmet, I probably wouldn’t have an issue either. They usually are designed aerodynamically to cut through the wind. But all I wear is 1/2 and 3/4.
I think you have those on backyards. They should go on opposite sides
You’re correct. I forgot and put them on the opposite way, so I had to redo them. The funny thing is, in the instructions, it shows them the way I put them on. But I knew that was wrong.
@rideandgrill hehe. The reason I know is I did the same thing. Had a buddy call me out in front of other riders. The real messed up part is you have to move the turn signals away from hitting them. That's a whole different nightmare. You have a very nice looking bike though.
Oh man! Haha Luckily you didn’t make a video for everyone around the world to see your screw up. 🥴😂 I got lucky and didn’t have to move the lights, it just barely clears them. Thank you for the kind words about the bike and for checking out my channel, i appreciate it.
I always think I look weird in an open face helmet. Yours looks good on you. I have 5 helmets full face, HJC dirt bike helmet, half head and my very first open face helmet from the 70’s. I have an open face for kid’s to wear when they ride with me. My open face is my first try at painting a helmet base was red with black and yellow flames. Your new one I see if I can find it and see how it looks. Cheers
Everybody thinks they look weird in open face and regular half helmets. But what I found is, you look fine when you’re on the bike. If you’re walking through a store with it on, then….🥴 😂. I’m actually going to do a new video soon about that exact topic. Thanks for watching and ride safe.
I cut approximately 4 inches off mine. They work great and more wind gets to the motor.
Interesting. Did you take it off the top or bottom?
@@rideandgrill I took it off the bottom
Not hating but Harley Davidson is not American anymore didn’t know if you knew that
I’m aware that some parts are made in other countries and the assembly is done here in the US. I’m not against riding other bikes made in other counties either. A good bike, is a good bike. But the S&S air intake and the cover in this video are still manufactured in the US. I try to buy US made when possible, but I’m also realistic.
You may like them, but your bike will suffer….. At least in the summertime.
It’s not ideal for engine temps, that’s for sure. That’s why I took them off. But the buffeting was stupid so I threw them back on (mainly for higher speeds. Around town isn’t that bad).
@@rideandgrill one of the first things I added to my bike when I bought my road king, then the next thing I did was add a temp dipstick. That’s what I realized that these guys are not to be used in warmer temperatures. Sort of like leaving soft lowers on your bike through the summer, yes, I’ve known people to leave soft lowers on through the summer, believe it or not….. And then expect longevity afterwards.😂😂😂
I’ll always pay more for US products! Good on you
Like I was telling someone else. If I can get US made, I will. But if I can’t, well that’s just reality and I get what I need.
I like the old squared off deflectors. The current style looks like they came outta the utensil drawer. Wyatt Gatling makes the old "brake broke" style deflectors.
I’ll have to check them out. Thank you and thanks for watching.
@@lowrider96 we have both, squared off and the ugly af utensils that thankfully still do the job
If you hate the wind, just drive a car.
Really helpful, thank you!
You’re welcome. Thank you for watching.
I made one, and it's badass.
Nice!
Same like u, i hate the head buffeting
It’s bad! Like I was telling someone else, I never had it before this bike so I never knew what it really was. But the deflectors work great. Thanks for watching!
They look good on there very nice 👌
Thank you, and thanks for watching.
I don’t think they make it better,might be because of how tall you are
I think the whole issue is personal meaning, your size and shape, how you ride, and what you wear all factor in. I may not have any issues if I wore a full face helmet but I don’t. I’m 5’9 but use a Tallboy seat that’s made for someone over 6’, so that changes my body position which I’m sure is a factor. Etc… obviously it doesn’t happen to everyone because there are plenty of people who ride the exact same model that will say I don’t know what the hell you’re talking about because I’ve never had an issue. Btw, thanks for watching.
I ride a 2004 Road King Firefighter...I would not put them on my bike...get a fairing that works...I can go 110 mph wearing a baseball cap.
That’s the problem, I don’t want a fairing on it. Especially now that they only make one bike without one, the road king special. 2022 was the last time the FLHR was produced. Even with a fairing though, I know some guys who still get buffeting and end up putting mid frame deflectors on.
GOT a 1981 FLH 80 they came with these,most people think they are for rider control,they are for curving the wind to run over your front and rear cylinders,my shovelhead runs hot without these on,tried it both ways on a 20 mile run,they are still on,and will remain so,if you are buffeting wind and are wearing a windshield,these have to be on
The only issue I have with them is at a stop, you can really feel engine heat on the right leg. But it’s a solid trade off for a smooth ride.
@@rideandgrill yes it is ,if harley put them on there,they must be necessary,mines old and it had them,so must be
Oh yeah. It’s not a new issue, it just seems more common now. I never had it until I got my 2019.
😂
You've got to be kidding. I ride a stock '89 FXRS Low Rider with nothing but a backrest, saddlebags, and an aftermarket exhaust. No windshield, fairing, or deflectors. Never had a problem. Ridden it all over the country, on interstate highways. No wonder they no longer make real bikes. There are no more real riders anymore. Sad.
Well I guess I’m not a real rider since it’s only been 35 years. You’re stock ‘89 isn’t the same as a ‘19 road king. Which, by the way, is the only machine to give me a buffeting issue. If you’re good to go without any issues, you doing good. Enjoy your ride!
Bro he’s talking about riding with a windshield. You ride with none……..why you talking? Geez
@@highvolts6620 Seems like riding without a windshield would make him even more "uncomfortable". Imagine having to put up with getting hit with a wind blast while riding a motorcycle. Seems almost unthinkable. If you don't like being out in the wind, drive a car. With the windows up.
Wow, did you miss the whole point of this. I almost never ride with a windshield, for the same reason I don’t like fairings, it makes you feel boxed in. I also think the whole reason for riding is to be out in the open. So I agree either with you there. You’ve obviously have never had an issue with wind buffeting. It seems to be a problem with newer bikes. With the windshield ON, the wind comes up and causes turbulence that knocks you around especially with a helmet on and because I sit so far back, it thumps pretty solid on the chest which gets friggin annoying on long rides. It also happens without the windshield but it’s not half as bad. Search it CZcams and you’ll see there only a couple thousand videos about it.
It’s hard to find a bike, especially a Harley without a fairing now. The only one they have is the road king special. I used to do iron butt rides on my 78 sportster back of the day. If I tried doing that now I’d need three or four days off of work to recover and a giant bottle of Tylenol.
Trump please hurry
Your bike is beautiful, I have a street glide next is going to be a road king, I do have the same wind deflector in my bike, it helps to enjoy the ride for sure. Safe riding✌
Thank you. The road king is a great bike, but even though I’m 5’9, I use a tall boy seat. Sitting that far back changes the way the wind hits me, so I needed to do something. Anyway, thanks for watching and ride safe.
lol
Does this not say more about your helmet? Or lack of? I ride all kinds of bikes. None of them with a windshield.
I only use the windshield when I need to, otherwise I’m not a fan. But even without it, the buffeting is horrible. If I ran without a helmet it probably wouldn’t be an issue, but I run half and open face. Not sure about full face because I don’t have any.
@rideandgrill I run a Simpson Bandit race car helmet. It's originally designed for open-air dragsters. It actually creates down force and fits like a glove. I've had trouble in the past with poorly made half cap or open face helmets bobbing in the wind, but never my Bandit. It might not be your style, but I've never gotten on a bike that it's ever given me trouble. There are a lot of quality full face helmets that do really well in all kinds of riding positions.
Thanks. I’ll check out the bandit.
So you're saying the fork wind deflectors stop the buffeting around your head? Am I understanding that correctly? Thanks
Let me jump in! Yes, cause that's what their made for! They equalize the pressure behind the windshield.
What he said. But I also get it without a windshield (I usually ride without one), Probably because I sit so far back with the tallboy seat. But it’s not fun, that’s for damn sure.
@@bernieriegger7447 also , I didn’t read all the posts but at the bottom of the thriple tree a lot of the bike have a small lip dam spoiler that directs air down into the motor area instead of up behind the windshield, some had them stock, but I’m sure there is something available to help control air flow around the bike.
Hi! Here I am, and THANK YOU! I am going to make this for sure!!!! You are a God!
Awesome! Let me know how it turns out. Enjoy and Thank you for watching.
I love sourdough and I love rye, I immediately subscribed! I actually found your channel from the bird taking off like a jet video which was super cool! If you look, a squirrel scared the bird.... must have been an intense moment! I loved that video! I will go to the full video of this bread, thank you!
Yeah, the squirrel looks like it did freak the bird out, and he was gone! It looks like it was on a string. lol
thank you so much. I did call weber customer service and they sent me a new hose/regulator. put the new one on , same deal. so I suspect you are on to something. I will switch out the tank . thank you for your experienced opinion.
I hope it works out for you. Let me know. Thanks for watching.
I ordered mine late last week and can’t wait to get it! Matte gray
Awesome! Let me know what you think when you get it. I’m about to do a longer video of them soon because I just got my 3rd one recently.
How much?
I paid $135 from Revzilla. (June 2024)
@@rideandgrill not to bad thanks
Yeah, and it was $40 cheaper than the Roland Sands Nostalgia shift rod that I was looking at, and it does the same job.
Thank you so much for posting this! It worked!!
Thank you for watching. I’m glad it worked out for you.
ARLEN NESS JUNK. The stock was better.
Arlene Ness has been around for years and it's not crap.
Just curious, why do you think it’s junk? Did you have an issue with one?
@@rideandgrill just your typical keyboard spazz, trying to get reactions. 🤪
Probably!
I don't see anything Wrong with it. But then again, when it comes to Harley's, You do what the hell you want, If someone don't like It. It's fkin Irrelevant. Don't you get it by now? Okay that said, I'm hungry at a bar Met new and had similar friends as dave man. # Weasels. So Screw arlaness, If you know the story , then you get it. That's different trashing at someone else's bike. Boy
Cool review , wouldn’t the Aussie std be more rigid that US standards ? Given you guys in some states can ride without helmets?
From what I see, the Aussie standard and ECE are more stringent than our DOT. Supposedly, if you ride here in the US, in a state that requires a helmet and it’s not DOT, you can get a ticket. Even if it’s certified somewhere else, but I don’t know anyone who ever got a ticket. I’m sure it’s happened at some point, somewhere. Thanks for watching, I appreciate it.
cheers mate
Great video, I’m going to order one too! Although I’m not sure what size. I’m a 56.5cm and am not sure between a S or M… I want to order a small but afraid it might be too tight, but also equally afraid of ordering the medium and it being too big. I emailed them, but it’s the weekend. I imagine they’ll get back with me on Monday. Any thoughts?
I’m also a 56.5cm, with an intermediate oval head and I order mediums in the DMD helmets. For me,Med is not too tight or loose. But I’m always cautious on suggesting a size because everyone’s head is different. Cheek pads are removable, so you can get smaller or larger to help with fit around the face if needed. Couple tips: don’t be afraid to pull the bottom open to fit it over your head, like a football helmet. If it feels a little loose, try using a bandana worn like a do-rag. Because I’m bald, I do this a lot. If you’re riding without a fairing or windscreen like I do, you may still need earplugs if the wind is too loud. Let me know how it works out for you and if you have any other questions. Thank you for watching, I appreciate it.
@@rideandgrill ok cool, I appreciate your very helpful feedback. I’m basically bald so I’ll try that in the future. Just curious how did you order/buy your DMD helmet? Thanks
I ordered just like I would any website. Nothing special. On the Brixia Moto website, look in the upper left corner of the page and you’ll see the 3 sandwich lines. Click that. Then touch the grey “country” bar on the top and you can switch it from Italy to united states, US Dollars, and English. That makes it 100% easier because it switches the whole website into English. I’ve used PayPal and Amex, and never had an issue. So far I’ve purchase 3 helmets from them without an issue. If you order, they will send the email in Italian but you can use google translate. They use ShippyPro to keep you updated on where your items are, and they REALLY track it well. Just make sure you check your spam folders to make sure the email doesn’t go there. My yahoo mail constantly puts stuff in my spam.
@@rideandgrill OK awesome thanks for the very helpful tips! I’ll check it out right now
I thought it was the regulator,but I wasn't sure the tank wasn't the problem. When I saw that the tank can be the problem, that's what I checked first. Turns out the tank is faulty. Tell your Pop I said thanks,and thank you for sharing!😊
Great!! I’m glad it helped you. Have fun, be safe, and get to grilling! Thanks for watching, I appreciated it.
I tried everything to find the compatible regulator and hose to fix the leaking issue but didn't help. I just exchanged the propane from the store and tried. It worked. Thanks to this gentleman for this simple solution. Note, I didn't pay for the faulty propane cylinder replacement.
Fantastic! I’m happy it worked for you. Thank you for watching and keep on grilling!!
Tried this. Sure enough it worked. Thank you.
Fantastic!! Glad it worked out for you. Be safe, happy grilling and thank you for watching. 🙏🏻
Hahaha, was watching this with headphones on, and my dog in the yard. Stared to hear my dog hacking. I look over. Nothing. Start hear her hacking again, look over, nothing. Wait one second…😂
😂 Yeah, that’s my English Pointer, Dixie. She’s 16, has a bunch of lumps and bumps, with a few on her lungs. But she’s on meds and is VERY well taken care of, but she has a cough like someone with COPD. Otherwise she’s great and just keeps going. Thanks for watching and give your pup a few extra treats for us.
Simple Mario but very effective. After replacing the regulator and hose from Weber the issue was there. I should have watch this video before replacing the regulator and hose. Thank you!
At least you have a new regulator now, so if any other issues pop up, you know it’s probably not that. Thank you for watching. Happy Grilling!
What do I do after buying a new tank? Is there anyway to transfer the gas in the old tank to the new one or what do I do with the one's that is leaking. Sorry I have no knowledge to propane tank at all, and I have the same problem, and I'm afraid it might leak out on its own and it could burn my house down or something, cuz I live by myself and my pets, so my pets are basically by themselves when I'm at work.
Thanks for your question. Just note, I am not an expert on propane. If you are unsure about its safety, I would recommend contacting your local propane company for advice. If your new tank is the kind that you exchange instead of refill, take it to the exchange station and have them give you a different one. If you have a tank that you have to refill at a propane fill station, then I would take it to them and have them test it for you. Sometimes it’s just missing a small washer and that may cause it to leak. Until you figure it out I would recommend not keeping the tank hooked up to your grill. Make sure it is closed all the way and keep it away from your home until you can figure out what’s going on. Good luck and let me know what happens.
Thanks man this is exactly what happened to me today and I replaced my new tank with another at the store and it worked, no regulator change needed!!
Awesome! Glad it worked out for you. Thank you for watching, I appreciate it.
Having this issue… what a pain… my grill is less than a year old… second tank. I’ll go exchange it for a new one.
Let me know how it works out for you. Hopefully it’s just the tank and not the regulator. But sometimes it is. You should also contact the manufacturer of the grill and explain what’s up. Maybe they can help you out.
@@rideandgrill it worked with new tank. Thanks for your helpful video.
Bic it you will know what leaked
You try it first, I’ll take your word for it.
worked for me - April 2024
Great!! Happy it worked out for you. Thank you for watching