Video

You should put the word carnivore in your title so carnivore diet people can find it.

I used the stove and worked

bad quality control. From SG90 ten pack i always have some not perfect. Some has slop some just not move at all. These are 6-10 dollar parts, i think they are just not checking them properly and the parts are poorly made... are the EMAX servos any better? or someone can recommend one that is a bit pricier but more reliable?

The "Tower Pro" I've got aren't the same as these anymore. I bought a few years ago and they were just like yours. The easiest way to distinguish them IMO is looking at the bottom. The cheap stuff has wires visible, the good ones have a tiny circuit board with an IC, no wires visible from the bottom. They're also way quieter now, before they were pretty loud and failed quickly.

No interest.

Oregon S33 Chain Home Depot

When they bring these around they’re admitting their stuff isn’t as good and won’t change.

Anybody got a link to the other ways that he was talking about because this way is just a pain in the Jacksie

I'm not sure what happened on our John Deere D140 other then the Drive Links on our mower were aftermarket and smaller diameter. The 5/8-11 die barley cut any threads onto the Drive Links and to make matters worse the 5/8-11 threaded couplers slid all the way over the threads without really touching them. I thought I had grabbed the wrong size threaded couplers but even the Jam Nuts I ordered from Amazon were too big as well. I guess I should have measured the OD of the drive links before I started but after not hearing anyone else mention this issue I just "ASSumed" the drive links were all the same size. We were still able to make the repair but we had to weld the threaded coupler in place instead of fixing it like above. Thank you for the video Robert.

I always just make two beef cans ravioli and add some chunky Prego to it with a little salt and pepper and its actually pretty good

Thanks! It films now in 4K

Compressor not the problem can antifreeze be put in. Simple

How about putting the next size up ( longer ) Oregon bar and chain ?

Are these genuine Tower Pros? Have to say I have a certain amount of concern about companies on Amazon selling counterfeit items.

Me it comes down to price. I am a truck driver and I send canned goods to our church for people that have a large family and need a little help with food so I can help more people with the gv brand and I eat it myself so I dont feed people what I don't eat myself.

I cant even see them so sharpening is not on.

I don't know why but I would stick with the Brand name. I use mine in home made Burritos and meatloaf. Dice up Bell Pepper and you would have a yummy meal.

It is a bad design, it can't be fixed, mortise and tenon joint in each step is required to obtain a secure ladder.

Whoa, guy you just saved me so much time (and headaches). Thank you

My pump works, It just leaks all the oil out when it's not being used. Hopefully a simple fix.

What did you do to bypass thermostat and compressor to run all time. You must have bypassed some wires ....

Great Value is very tasty food!!! Hormel is great too, but, in a pinch and to save money I will eat Great Value products! You have to remember GREAT VALUE or Walmart does NOT have it's own processing plant. Walmart pays another well known brand to make and label for Walmart... Soooooo, the question is, WHAT is Great Values hidden real brand? On another note though, I believe Checkers uses Hormel chilly sauce on their hotdogs and if I remember a long time ago, a friend of mine worked at Checkers and told me they use Hormel products............ SPICE WISE, Hormel wins. Price wise, Great Value wins........ "Store brands are usually made by name brand companies. GV peanut butter is made by the same company as Peter Pan peanut butter. Both by ConAgra Foods. GV bread is made by the same manufacturer as Sara Lee products. Sara Lee is currently owned and by Hillshire Brands in North America which also makes GV bread. GV pasta sauce is made by the same people who make RAGU sauces. Currently that is Mizkan Holdings out of Japan. Basically look to see which brand name is on the shelf right next to the GV brands and that name brand company probably also does the GV brand of that product."

I had a pack of these servos in my Amazon shopping basket and was wondering about them, well after viewing this video I went ahead and purchased a pack of 10 Muizei 9g servos to control points on my model railway layout. I'm sorry to say that my experience of these servos is not as good as yours and I have returned them to Amazon as not good enough quality. Why - instead of moving from one position to another at the throw of a switch they would move then jitter and when the switch was thrown in the opposite direction they would move but then jitter continually. I will be ordering some more of the original servos I ordered from Wize productions as they do not jitter on my current setup.

And how does this make the air conditioner colder?

Did this with a walmart. Bought 2 15s and replaced them in home speaker boxes. Blew immediately

Great video! Does this kind of sweeper work for twigs and small sticks--small finger thickness? I have a big sycamore tree that drops those things constantly.

Easy peasy! Thanks

The throwback recipe looks like Raviolios… which they don’t make anymore

Hi. You still have it

How long should it take to see the oil come out of the hole? I replaced both of the tubes so they went back in dry.

Hey good video. The microfiber bonnet is not available in Amazon. What u think about the terry bonnet wen makes. Thanks.

What is "kids food"? You mean adults are forbidden to eat it?

Irony that the towerpro servo on my hand has both potentiometer and TP labeled. I suppose it might be due to different seller.

What if u don't have a tab guru

Wow! This vid is over 8 years old and I just bought the pole saw yesterday. Of course, branded with a different name, but clearly the same one. Slightly different, of course. But the basic design is the same. And yes, brand new yesterday and the f'ing oil pump doesn't work. So using it yesterday and today, I had to go old school by stopping after every couple of cuts to manually oil the chain. LOL When I bought a quart of chain oil today and a little oil can, there was a little box on the shelf with a 10" chain. I think that they were just getting rid of them because it was only $6.50 ish. I get it home, wondering if it would fit and YUP! IT FIT PERFECTLY. LOL In fact, it's clear that the chain that came with the pole saw and the one in the box are from the same factory. They are identical. So, tomorrow, I'm going to disassemble this thing to see if the old problem is new again. It's just weird that they used glue in the first place! Talk about cheaping out. LOL So thanks for this vid. This will help.

I love my Kobalt Pole Saw - 80-volt - 5ah battery - 10" Bar - 6 ft / 8ft foot Pole Saw. I have been using it for more than 3 years now. It works great on my southeast Louisiana farm clearing property that a hurricane went through and trashed all the trees in the woods of our 20-acre farm. Today I'll be cutting a 6-inch limb off of a tree out front.

303 aerospace protectant for the sidewalls. NOT silicone based.

My shaver(philips) rotate but doesn’t cut (one of three ),how can i fix that

Thank you for the video! Grateful for your hard-work editing the video, making it fun, short, and simple/sweet! ❤

Thank you so much for your instructions.

The idiots at chef boyardee discontinued this. Losers.

I bought the pack of 5 of that tower pro person and out of 5 none are working, I mean they literally now moving. Should have watched this video before buying it, sigh

When scrolling through the thousand of movie it sucks because its so slow to bad we cant change the view list to grid

Wasted 34 seconds!

i'm searching for some way to replace ' fold up' procees .. for exmple when baking japanesecottoncheesecake.. lastly,u have to foldup mixer

i will leave it under the sun in summertime

This is not advisable as it will surely shorten the life of your compressor by a lot. A better solution is to get a larger AC unit. So if you are running a small 5000 BTU AC, get larger 7 or 8000 BTU AC (no, you won't need a 220v plug). Even though my bedroom size room is supposed to cool off fine with a 5000 BTU AC, but it doesn't. So I got a 8000 BTU AC and problem solved. Now I set the AC thermostat to about half where I had to have it up all the way with the 5000 BTU and the compressor almost never turned off.

Thanks, this was super helpful. Someone gave the Chicago Electric pole saw, brand new in the box, but it was missing the bar, chain, and chain guard. I wasn't finding replacement part info looking in the typical parts sites, but you resolved what parts were needed and where to find them.

It's pronounced Oregun, btw -- not orgone

Does mixing brands with one input system as you have done not potentially introduce some variation? Maybe test each one independently.