Video

Damn, watching about 100 videos, this one actually menations sealant... something different! Ordered one now for my spoiler! Thanks bro

I would have liked to see this trial done with a earthing rod pushed into the lawn or soil. This would be better for safety and as I understand it, that is how a generator should be earthed. To save time in a powercut you could knock a earthing rod into the ground so all you will have to do is connect your generator to it in the future.

😮amazing

Thanks for sharing. I have model y, need a comfortable mattress for nap during work

Wow you can buy a surf mat for the cyber truck totally makes it worth the 100k

I got this one and i like so far, i just tried to get a better hose with a short trigger gun. The only problem i have is that i can’t get any adapter to fix the inlet hose. No 3/8 , 3/4 or 1/4 will fit. I tried to contact AIVolt via amazon, they said standard M22 1/4 but theres something off. Any recommendations of the size for adapter to add a better hose

Such gay Tesla logos…don’t get me wrong I like Tesla…but when people advertise a company makes me wonder…WHY

Thanks for the vid! Do you recommend applying ceramic AFTER you've applied wheel balancing weights? I imagine ceramic would make it difficult for the weights to adhere.

Pretty cool

I don't get the lowering concept in real world driving. Just more risk of trashing the battery, etc. The thing handles well enough already.

Great video. Very clear and understandable even without knowledge of English. I changed the bearings on my Biolomix T5200. I couldn’t have done it without this video and probably would have ruined the new bearings or shaft because I wanted to hit it with a hammer. The old ones were pressed out very tightly and the new ones were pressed back in. I also used a vice, socket heads and a spark plug head. Walked literally millimeter by millimeter so that there was no distortion. The hammer is very rare and neat. Greetings from Russia. Thank you🤝

Did you change the orifice? The propane orifices are much smaller than natural gas.

I picked up the on/off and love them. They look so sharp in my M3.

If I can open the doors with my phone app, why wouldn't I be able to pop the Frunk?

Black silicone seal awesome

Can I use a battery conditioner to recharge the 12V battery and get more life out of it?

I have had this for probably over 2 years now and I never knew that the dial turned and you can put it on auto but somebody did mention that the auto feature doesn't work very well so I just use a manual but sometimes you have to also play with the attachment that goes on the stem valve otherwise they're going to let air out

How was your range impacted by the spacers?

Wished it came with the rear door sills.

With the model 3 it doesn't hide the wire very well on the trunk portion when running it to the back

Your promo code doesn't work.

so these don't fully close under the seat?

Id rather park super far and walk. Good thing it came off!

If you select car info will it display trip information?

Just GET ON WITH IT!

The #1 issue I had with a previous Hansshow M3 rear screen was the audio was not in sync with the video. There's a reason that the sample video that comes with the device does not have dialog. Can someone with this version upload a video recording of a show being watched AND the audio from the car?

Man i was just thinking earlier today about the best screen to get for my Model Y LR and you just popped up while I was cooking!😂 Definitely going to give this one a shot. Thanks for the video and the info!

Genius Tesla made glow in the dark escape latch in their hatchback.

Thanks you saved me it would be better if you keep portable jump box

Garbage vehicle

I have an idea if you guys ever worked in a gas range oven, besides change all the parts in the video underneath of the oven there is a box that have an spring inside if the range is set up for natural gas you need to flip the spring for controlling the propane why don't you take the box from the grill and try to see if there is a spring and if there is nothing try to install the box from the oven to the grill for controlling the flow of the Propane. I'm going to get one natural gas grill tomorrow and try to convert to propane and i I'll let you know later how ends .

I just did this with Permatex 81158 for a small lifted area on my spoiler of my Supra. It looks super good. I removed the tape probably around 15 minutes, and it was still in its liquid phase as in this video. And boy was it messy. At that point, I wanted to have a cleaner line and I wanted the finish line to sit more underneath the spoiler, but anything I did at this point was smearing it like shown in the video. I think it's better to sit and wait until it reaches the rubber phase for cleanup. It's pretty spot on about the timing at the 45 minute to 1 hour mark when it gets to be more rubbery in consistency. That's when I did the best cleanup. I used a small cup of water and dipped a glove-wrapped plastic trim remover (best not to use metal because it'll scratch your paint) and started pushing the edges of the silicone to a straight line. This will leave small smear marks, but it's way easier to clean up at the rubber phase, which I use alcohol pads to help wipe, and still at this point it wipes smeared silicone very easily.

Can you check the manual for this to see what to do if you cannot pull the trigger?

A pull cannot to open the frunk would've been much smarter considering your jumper cables are gonna be inside the car 🤦‍♂️

Great video mate seriously outstanding work .Am here in Sydney, Australia & youve just changed my mind on whether i was going to get coilovers or not.Well done...

Neat idea. Would sticking a piece of dark transparent film on the windshield help with the fidelity of the HUD? you could experiment with a paper sized piece in the location you want the HUD to display. If this became useful, I'd recommend a more secure dash fixture. I could see the tablet launching into your face in a collision. And just sliding off the sticky pad in a hard stop.

You made the brakes look easy, I had to start at the top , pushing it down. Would I do it again, Never.

I have a Weber summit gold grill with a rotisserie and a smoker on it also. It is natural gas and I want to convert it to propane. I couldn’t tell what size the jets were you got for the summit grill you found. I think it takes 8 M or 9 M. Just not sure. Thank you.

On my Model Y the 15mm spacers allowed too much of the OEM wheel stud to stick through and they were hitting the 20 inch wheels on the backside. I ordered some 18mm. The rear was fine with 20mm. Great video thanks.

Great video!

Nothing like doing it yourself. Good job. I believe the "defect is from over stretching while cold. It's happened to me. Heat and a wrapping glove makes your life easier.

is this stuff removable down the line if i want to remove my spoiler?

Can u tell me where's the rostisserie valve is on this grill? I can't find it . Thank you

You're spot on advising to try the repair. As long as all is unplugged and powered down, it's worth the effort to try. Dishwasher went off, it was a special $3 control panel fuse that popped internally due to extremely cold well water coming into it that should have been warm. The cold water was caused by Navien tankless hot water unit failing due to a $30 plastic impeller flow meter that failed... It takes time to research and learn but if I replaced both of these products out of frustration, my cost on them would have been over $3000. Thanks for showing us the washer!

😈 'promosm'

I Grabbed the 19* Konig Heliograms in bronze with falkens… purrrrfect ❤😅

Don't think US DOT would approve.

I'm not sure the manufacturer understands what matrix means but cool

Thanks for the review, I'm really happy with mine too.