![Keen Shot](/img/default-banner.jpg)
- 50
- 385 300
Keen Shot
United States
Registrace 8. 04. 2014
Just a dude doing stuff...
POV drive Stage 2 135i
First time ever doing one of these...just a relaxed drive through the streets of Mexico with a short pull near the end.
Car mods are VRSF 7.5" competition intercooler, chargepipe, filled motor mounts, Rogue engineering polyurethane mounts transmission, VRSF catless downpipe, straight piped exhaust, BMS air intake, and oil catch can.
Car is running an MHD stage 2+ E30 tune. Probably somewhere around 380whp/420+ ft. lbs torque.
Car mods are VRSF 7.5" competition intercooler, chargepipe, filled motor mounts, Rogue engineering polyurethane mounts transmission, VRSF catless downpipe, straight piped exhaust, BMS air intake, and oil catch can.
Car is running an MHD stage 2+ E30 tune. Probably somewhere around 380whp/420+ ft. lbs torque.
zhlédnutí: 550
Video
Straight piped BMW 135i
zhlédnutí 507Před 9 měsíci
Just playing around with a DIY axle back exhaust I built out of off the shelf piping and some spare clamps I had laying around. Midpipes have no resonator and straight piped from the downpipe all the way back. Car is a 2013 135i with the 7 speed DCT. Current setup includes VRSF catless downpipe, BMS intake, VRSF 7.5" competition intercooler, no resonator/straight pipe exhaust, MHD stage 2 E30 t...
Primary Arms SLX Nova, first look and some thoughts...
zhlédnutí 7KPřed rokem
Just got the scope a few hours ago as of the date of this video, so my thoughts are still fresh. So far, excellent value for the money and probably the best LPVO on the market under $500. I think Primary Arms has a real winner in this segment but it isn't perfect... Pros: Excellent glass quality overall Relatively flat image for scope in it's pricepoint Huge field of view Tactile and clicky tur...
Suppressed Steyr AUG
zhlédnutí 615Před rokem
What's inside? Steyr factory gas plug Arid enhanced trigger and safety YHM Turbo K Steyr reduced power trigger spring kit Corvus Defensio Front rail/Shell deflector Manticore Arms enhanced mag release Manticore switchback CH
Suppressed AUG testing
zhlédnutí 554Před 2 lety
Totally forgot I had this footage taken awhile back, first shots through the AUG with the Steyr suppressor gas plug here, mainly just checking function. Works perfectly fine as you can see, softened the recoil impulse up a tad as well. This is a 2013 build date A3-M1 with the FN made barrel, YHM Turbo K suppressor, Steyr suppressor gas plug, Corvus Defensio front accessory rail, MI QD rear slin...
Want a Kriss Vector? Oof...
zhlédnutí 34KPřed 2 lety
Raw, unfiltered and unedited thoughts about this thing... Makes a really, really fun and cool range toy. Not sure it's anything more than that though...
PTR 9CT very early impressions...
zhlédnutí 2,2KPřed 2 lety
Had it about a week (as of the date of this video). Super early impressions, what there is to like and how the build quality is surprisingly good. Also, AVOID F5 Manufacturing products like the plague.
How about a 9mm side charging AR that takes Scorpion mags?
zhlédnutí 7KPřed 2 lety
Something fun I cooked up in the lab, testing in the name of science...
Why I like the Holosun HS512C
zhlédnutí 15KPřed 2 lety
The HS512C is a neat little red dot optic, and here's how I feel and why... *Watch with captions on plz*
Vortex UH-1 Gen 2 "Huey" thoughts and impressions...
zhlédnutí 2,2KPřed 2 lety
Vortex UH-1 Gen 2 "Huey" thoughts and impressions...
Introduction to the Kalashnikov USA KP-9
zhlédnutí 6KPřed 2 lety
Introduction to the Kalashnikov USA KP-9
First couple hundred rounds through the YHM Turbo K...
zhlédnutí 1KPřed 2 lety
First couple hundred rounds through the YHM Turbo K...
Full review of the Panzer M4 (Benelli M4 clone)
zhlédnutí 85KPřed 2 lety
Full review of the Panzer M4 (Benelli M4 clone)
That color on the front stock is great
This video should have been called "full breakdown of everything i did to my panzer m4"
LOVE THE UPGRADE!!! Is that a manticore pic rail too? If not what is It. Oh and I need that manticore setup. Excellent info.
I haven't fired an ar before only M16's and military rifles. Just looking at everyones take. I wonder if u could install an A2 barrell but on the other hand why would I want to change over maybe the A2 could handle the heat better, however the barrell prob want fit.
The barrell tapers down toward the muzzele
Why the hell did they get rid of the folding stock? That sucks.
They didn't get rid of it, they have models that come with the old folding stock and models with the buffer tube. You can buy the original folder on its own too if you want to swap it out
Very in-depth review. How would rate the Swampfox Arrowhead with the MIL reticle and the relatively new Vortex Venom with the BDC3 reticle against the PA LPVO? I've heard that PA's tight eye box is its biggest and maybe only negative.
writing this comment as I watch the video and this shts funny af first off "two stage trigger" hahahaha tell me you don't know sht without telling me you don't know sht that's not a 2 stage trigger its just free play in the trigger or pre travel if you wanna call it that second off he says the ergonomics are garbage then points at the locations of the controls for the weapon ergo is an opinion but just because the manual of arms is different then an AK M16 or shotgun doesn't mean its bad you cant use a bull pup and say the ergos bad because its not like an AR15 thats just stupid also being a lefty myself yea ambi is super nice but when youre developing a gun for the MASSES well sorry but leftys aren't the masses so its a side note to them I gotta deal with it and so does every other lefty too and also i actually think its easy to use lefty because i can choke up on the gun unlike a righty and not worry about bumping the mag release or bolt catch and i can operate the mag release with my pointer finger and recharge the weapon AK style reaching under the barrel to rack it back with my right hand next he says it was sooooooo stupid for vector to serialize the lower half then never explains why his next sentence is the lower half is heavy and the top half is hollow plastic why is it stupid to serialize the lower ARs are that way? next complaint he talks about is the manual of arms its not like typical western firearms so its automatically bad not much to say here but ok........ edit minute 21:45 he says its baffling they serialized the lower and not the upper still doesn't elaborate that's pretty much it a lot of opinions which is fine but most of it is goofy besides the mag related stuff i agree on STAY WITH FACTORY GLOCK MAGS
Could you help me find the fab defense m4 folding stock glr 16 with the picatiny rail adapter I’m really interested please and thank you .
I just bought a Panzer M4 and waiting for delivery. I plan to leave it as-is. If I like it, I’ll buy a Benelli M4 and leave it as-is. Over the years when I’ve attempted to “upgrade” a stock firearm on my own, I encountered issues. I know some folks who have tested the Panzer and Benelli side-by-side and were impressed how comparable they were performance wise without enhancements to either one. One individual mentioned that his Benelli encountered some hiccups with cycling but cleared up after a break-in period of about 100 or so rounds and was absolutely reliable afterwards. I’ll take reliability with as-is factory configuration after a reasonable break-in over two additional rounds of magazine capacity and other accoutrements that may compromise reliability and require more tinkering. Just my opinion and experience. But nice review nonetheless.
I would love to have a John Bargain Wick 😂
I noticed the IDF is using both of these on there LMG
I have only had problems with the factor glock mag. My extended mag has always worked fine.
Is this compatible with other AR 9 uppers?
How often did u have to clean it? Did u run it with a can the whole time too?
We need updates on the Panzer.
Subscribed. Great review.
Great honest review...I will pass on the Kriss Vector...
…but you didn’t do the slap 😔
What’s your point???
I ran 500rds pr so through my 92 with the pic rail. It never once came loose. When I changed to the cnc warrior brace from the sb tactical that Pic rail was locked down tight. You may have not had enough tongue or loc tite from the factory on yours. I'm going to have to get a light on this thing soon but I enjoy the wood handgaurds. The manticore set up may be what I go with. Nice video.
Older models had no holes in the rear trunion, it was just a bare, flat piece of metal. I SBRed mine to avoid any potential future complications with the ATF.
Well, you should stop mumbling and fumbling on this video. And if you know something that's wrong then say it. Really, because other people that have bought it and done videos on it and take it out and ran it through the basis. Have said that it worked in performed rather well and they look like their ex. Military people or current military people. so I guess it just depends on who you want to listen to as to which b. S you get
Thank you for the review.! seriously considering buying one, but where did you get the muzzle break/ flash suppressor? I'd really like to know?
I really think it's just eating itself alive the bolt carrier is not hammer forged the pistons hit on a weak corners of the carrier the pistons will eventually get jammed in the track as it hammers those eyes off...it's a poor design by benelli that was an issue in the military testing the real deal has a specific mtal to survive the abuse ,the Turkish are using cast at first and it was disappointing but now they are steel but it's not hammer forged!! Same problem will occur within 500 rounds!
Just pick up one of these and have ran 200 rounds so far through it with no issues what so ever.
Best review of the 512c I’ve seen. This review provided the info I needed to make a purchase decision.
It would be nice and appreciated if you’d not use foul language in your videos. Lots of folks watch gun stuff, and don’t need to hear all the bad language you use. I know you have the right to free speech, but I am ASKING you to please refrain from such language. Thank you.
Being black, he just can’t help it.
Thanks for the nice review of this optic! Great work explaining all aspects of the optic and giving your opinion 🎉
Immediate Like! Thanks for sharing your update on your Zastava Zpap92. I am in the market for one and I like to do my research before I buy any firearm. I love the look on your Zpap92 and tips that you provided as well. I too want to modernize my Zpap92 and to put a brace on mine. Great video my friend 🎉
By the time you do all the upgrades so you can say to yourself that this is as good as a real M4, and by the time you replace the parts which fail due to durability issues, poor metal treatment and take into account the aggravation, something inside you says , you should’ve bought the real thing. It’s like buying a lesser brand vehicle which spends more time in the shop than driving, just because the price was very attractive.
Can't get the upper to fit on my AV 9 with scorpion magazines.
This has to be the best upgrade on a gun I have ever seen in my life. Please brotha teach me your ways 😅
So after the break in (minus the issues caused by the extended tube) it ran fine? Any other issues with this gun after 1000 rounds?
I'm 2yrs late but how is the bren holding up?
What grain ammo are you using and which suppressor is that? Very clean looking setup your running.
Picked up a Vector .45 barely used for $800. I like it. I like unusual guns. I don't care that it is heavy. I am not carrying the vector into a warzone. If you like it, buy it and have fun. If you find one used, even better...
10:45 yep thats new alright
WhT mount is that?
This crybaby starts off with let me start off with the bad. Then spends the entire time bashing the gun. Really you should “start off” with some therapist.
I thought I was the only person thinking the same thing. Also, most sensible people research something they’re considering spending about 1.5k on. Ever heard of a test drive?
Biggest regret I have is selling my Panzer M4. I made a few upgrades, like a Masa Tactical side saddle and a adjustable stock. I had plans to add the two round extension. A guy at work was looking for a shotgun and I mentioned I had a M4 clone. He ended giving me $650, so I sold it. Now I'm looking to buy another shotgun and I'm looking at the Panzer M4 or the Mossberg 590. I liked your video very much. Keep up the good work.
Appreciate your in-depth review. Excited for my Zenith K clone to arrive. Glad I didn’t order those ETS mags.
Do you celebrate Christmas? You remind me of a bitter old man that blames the world.
I know this is an old video and you may never see this. But, if you remove the top picatinny rail, you will see 3 screws that hold in the trigger group. remove the middle one. measure it and get a longer one. not sure how much longer you need, but you can file it down to suit your personal feel. this will remove the "slack" in the trigger and make it more crisp. When tightening it down you will see the trigger move back. before doing this figure out how much slack is in it and where it becomes tight, that is where you want to adjust it to. the only thing you want to be sure of is that you get the same head screw so it will clear the rail when remounted.
Yep, did this to my .45, no slack now.
I say it all the time: SMGs don't make good semi-automatic weapons. They rely on their high rates of fire to really take advantage of the low recoil of a pistol cartridge, while still remaining very dangerous. A single squeeze of this gun at 12-1400 rpm is about 6-7 rounds. Imagine 7, .45 acp rounds hitting you all at once in relatively the same spot. Even if you have body armor, you're going to sustain internal injuries from the trauma alone. Now neuter the gun to semi auto and it has all of the same capabilities as a pistol, without the low cost, weight and profile. Really needs to full auto to be effective, otherwise bring a rifle that fires blackout, 308 or 5.56. Now in 10mm, this gun starts to shine again, where you can make follow up shots much more accurately and quickly due to the structure of the gun than you could a pistol. But at 9mm and 45? I just don't think it's worth it. Maybe just for the controllability but is that worth all of the other downfalls?
Assuming you’re fighting a war I agree. But consider that some people aren’t buying it to go off to battle they just think it’s cool.
On paper what you say makes sense, but in a shtf scenario, we are all probs gonna die so it doesn’t matter, use what you got
@@harrisonclark3799 Right right, I am thinking hyper pragmatically in this case, or maybe I'm just angry because I have a p90 that is essentially a neutered rifle now because of the NFA. Either way I just wish fully automatic wasn't such a touchy subject.
@@immts6475 Don't think like that brother, you gotta survive!
@@Shademastermcc true, and I will try my best, but I am probs going to use a gun I like that looks cool over the objectively best on paper lmao.
I need that dope ass folding stock adapter, where you get that?!!!?
Sucking being a wrong handed person.
I own basic version and it s a great gun......
Can the stock be removed, leaving just the pistol grip ?
If it just had the ergonomics of the if would be great, blahblahblah go buy an AR