Video

That’s not a USB it’s a HDMI

Please don’t use that coolant, it’s chemical compound will waste your gaskets

So for the Out port it uses a 1/2" ID hose and for the In port it uses a 3/8" ID hose?

I would have added some threadlock

wet the towel with carb cleaner?

Theres nothing wrong with my car but I ised it once to run s dashboard light test and it illuminated the dash but then only half my dashboard lit up. I ended the test snd then my csr wouldn't start. My nattery showed 12v on statting then dropped to 6v while running the test. I had to jumpstart my vehicle snd then i had an ABS light TPMS light and traction control off light. After driving a short while all the lights turned off. I tested the battery with a voltmeter and it read 12.8 with the car off. What did i do wrong, do i have faulty unit? Im going to get the battery yesyed tomorrow with a minute man. I just don't see it being my battery it cranks no problem... Any input appreciated.

Has it got online programming?

So easy wow Thanks Bro

subscribed from uk

You said you had to turn off electric switch for electric start to do a kickstart proper ??

What is the part number on that Fram oil filter for a Honda 600

I have to admit, I watched this video to find that hidden bolt on the bracket. Whoever came up with that idea, needs to be fired!

Hey! New question - have you ever lifted up the front tire of the bike? If so - how did you do this? @150SCOOTER

Your engine is very clean, good job.🔍🎥

Very good job, I will listen to you to buy the one without wires in Amazon. Thank you very much for your time to present this wonderful video.

Wow. What a useless video 🥴

First the coolant flush, now the rear wheel removal, your videos are helping me out with this bike left and right. Glad you keep uploading these. I do have a factory service manual but I still love to see actual pics/videos of what's going on if possible.

I am getting ready to change the spark plugs in my 2018 pacifica at 246000 miles with no problems with the champion spark plugs. They are made for chrysler engines. I have worked on dodge and chrysler engines for over 25 years and they work better then anyother spark plug. Champion spark plugs don't work as well in gm or fords.

Hi what is best tool to work on sprinter and crafter type vans

I liked the video. I managed to replace the piece with a new Mopar part. It was definitely the part because it was clicking in my hand with the car off the first couple minutes I was trying to remove it. But it still happens with the new part any ideas?

How do I access the one in the driver's side? Could someone point me to a video?

Apparently it is mainly coding that can be affected by expired subscriptions, and the odd one off vehicle, but it says right on the Autel website it generally should still work.

Thanks

If you pull the throttle on a cheap disc lock, it'll break. If you do it with an expensive one, it's more likely to damage your rotor/caliper, but you are more likely to not lose your bike. Speaking from experience.

Nicely done and a clean install 👌🏾 👏🏾 👍🏾 😀. Were can I purchase ?

Weird. I wired mine just like yours and I have left side buttons working but not right. I checked and double-checked the wire positions. All good there. My unit came with them already in a pnp harness for it.

Why didn't you just use the old washer as the spacer?

Have you lost the ability to program tire pressure sensor id numbers into your vehicle computer with your scan tool? The one I bought allowed me to program in the id codes for 2 of my new tire pressure sensors on a 06 dodge grand caravan, but I didn't do all 4 at one time. After I finally changed the other tires, the reader wouldn't connect to the van any longer so I updated the software on the scanner. Now, it will no longer allow me to do anything but see the id numbers. Even then, I have to fight through various menus to get to that point.

Support brackets on back are a pain if you let it

nice bike! thmbs up for the hard work man.

No cant code with it spent 1800 on one after called autel they told 700 then it can code

What size socket?

Don't dish the dealer mechanic because when you and your so called smart mechanic can't fix it you take it to the dealer, they have no problem fixing it. The dealer mechanic is 5 to 6 years ahead of your mechanic in technology.

Lol, champion spark plugs are good millions of cars have them no problem. You may have used the plugs for the wrong application. On some older volvos, you can not use platinum plugs. The coils can't fire correctly you need regular copper plugs.

Why didn5 you show the rear spark plugs Bro? Dang man, I watched the whole thing hoping to see the rear done dude.

You can order the cord extension for this scanner for 15$. 1ft 6 inch extension. I just purchase the same scanner and it recommended and extension for the cord in the usually bought together tab, so I got it. Thanks for the reviews. In one other review of the same scanner, the mechanic tested to see if it would program keys and this scanner does program keys.

Thank you very much for this Video. It's very helpful

Just did this but cleaned Maf sensor as well👍🏻

Hey I have problem with the air conditioner in my Chrysler Pacifica in the front the air works just fine and normal but in the back part it only blows and doesn’t cool it’s a 2020 model do you know what the problem might be?

This video is really helpful for removing the manifold. Did your Pacifica have an odd bracket that fit on the throttle body support bolt?

I would try salvage yard to find a shield. Plugs look great. Would clean out upper intake but be very careful of the sensors. Thanks for the video.

Awesome video. Answered my question!!

great video thank you I just have a quick question? I have a spark plug gap tool with me would you happen to know the measure in inches on a spark plug Honda shadow ?

It would be interesting to see the intake manifold oil residue reduction. I just did my plugs and was surprised at how much oil was in there.

I like Launch brand scanner, Pretty cool!

what is the link to buy the headunit?

Anybody know how much the update costs every 2yrs, I am just a home gamer that would use it sparingly and not too often, also can you still use it just as OBD2 without updating? Thanks

Thanks. I bought it from Aliexpress for less than $40.

I had this problem .. it was a red wire that had discontinued from a plug..

Man your engine is soo clean how do you clean it so well???