- 39
- 918 225
OTDefense
United States
Registrace 19. 07. 2015
Nub Mods for Safariland® and U.S. Duty Gear holsters, Stippling tools/tips for plastic guns, grip reduction jigs for Glocks.
Basket Weave Tip pointers-
Quick video with some pointers on the Basket Weave Tip. Highly sought after pattern but also the most difficult to lay down.
zhlédnutí: 343
Video
Safariland Lever shape update for 2024 Nub Mods
zhlédnutí 819Před 4 měsíci
Keeping up with Safariland's ever changing lever shapes with, this short video is designed to show you close ups of the most commonly used holsters and give you a visual to ID what nub mod you need. Watch our longer more detailed video "Nub Mod Selection" if you have one of the less common holsters or need more clarification. Questions: info@otdefense.com, send us a pic of your holster.
Razorback Glock Backstraps
zhlédnutí 2,4KPřed 10 měsíci
Into to a new variation of backstraps used in conjunction with our Hump Eliminator Jig. The Razorback was originally created by Boresight Solutions as a custom solution for his customers. This product brings the Razorback ability to the DIYer and gunsmiths with improved efficiency. 0:00 Start 0:47 G19 Backstraps 1:14 G48 and 43X Backstraps 1:45 Jig pin hole Tip 2:15 G48 and 43X Cutting details ...
Glue on Nub Mod Testing and Installation
zhlédnutí 2,9KPřed 10 měsíci
Put a beating on a glue on Nub Mod to show how well they stay in place, as well as showing how to install the new Vault Nub Mod. These are considered permanent installations, as you run the risk of breaking the lever as most are not as stout as the new 'Vault' holster's lever. I have successfully removed one on a 7TS RDS holster, but it was taken off in pieces with the lever supported better th...
Glock Grip Reduction in 3 minutes
zhlédnutí 12KPřed rokem
Quick demo of the OT Defense Hump Eliminator Jig. Phone time set for reference and video sped up give you a quick overview. Check out or full length video for more detailed info. Hump Eliminator Jig also works on the PSA Dagger.
7TS Adjustable Plug System
zhlédnutí 3,9KPřed rokem
Allows you to make your 7000 series or '7TS' holster work with various barrel lengths, compensators etc. 6000 Series holsters need our 'Multi-Muzzle Plug for 6000 Series'. 0:00 Intro 0:29 7TS Flat Plug 0:52 7TS Adjustable Plate and Plugs 2:18 Changing plugs 3:24 Glock 34 4:15 Screw Kit 6:19 Non RDS -Holster disassembly and 7TS flat plate install 8:48 RDS Holster disassembly and 7TS Adjust Plate...
Stippling Options - dozens of designs and the limit is your imagination!
zhlédnutí 35KPřed 2 lety
Demo of many of the different tips offered by OT Defense. We are constantly making new designs, and have tips for the newbie and seasoned stippler.
Charging Nub for BRN-180™. Fix that tiny handle!
zhlédnutí 4,4KPřed 2 lety
Quick overview of the OT Defense® Charging Nub for the Brownells® BRN-180™ rifles, with the standard charging handle. Does not impede or interfere with the dust cover, or rifles function as designed, but provides a huge improvement to surface area for you to grab, no matter how you manipulate your rifle. Questions: info@otdefense.com to get your hands on one: store.otdefense.com
Multi Muzzle Plug for Safariland holsters
zhlédnutí 13KPřed 2 lety
Quick explanation of what it does and demonstration of the simple installation. Works for both right and left handed holsters. Have added to new lengths since this video, and we have updated from using nylon to Delrin, which is what Safariland factory plugs are made from. If you do not know what plug you need, pull out your factory plug and compare. If you still don't know, send us an email wit...
Hump Eliminator for Glock 43X/48 and 42/43
zhlédnutí 6KPřed 2 lety
Quick demo of how to utilize the supplemental parts available for purchase with our Hump Eliminator Jig. You can buy two simple parts that will allow you to use the Jig as shown in the full instruction video, except with the 'micro' Glock pistols.
Glock Grip Reductions made Easy
zhlédnutí 65KPřed 3 lety
Demonstration of the new GripFix™ Hump Eliminator™ by OT Defense. Simplify the process and get your Glock pointing like every other gun on the planet! store.otdefense.com Watch the entire video and decide if this is a good fit for you. Questions? info@otdefense.com, or 541-566-6908 To the guys who will feel the need to comment about how 'sumabudy gonna ruin gun', go ahead, but know that trolls ...
NUB MOD® Selection
zhlédnutí 24KPřed 3 lety
NUB MOD® Selection for the various Safariland® Holster types. There are quite a few different factory lever shapes, this video will help you select the correct model NUB MOD® 80% of users (Glock, MP, XD, HK) running a standard Level 1 or 3 holster, watch the first few minutes. 0:00 Start Level 1 1:05 Level 3 2:00 6000 RDS Level 1 and 3 3:03 7000 RDS Level 1 and 3 3:35 1911 4:50 2011 / Staccato/...
Anti Rattle Foam Install (short video)
zhlédnutí 2,9KPřed 3 lety
Demo of how to install our foam in your holster. See our other 'Anti Rattle Foam for Safariland Holsters' video for full explanation, fire proof demonstration etc... Available on our webstore: www.otdefense.com
Anti Rattle Foam for Safariland Holsters
zhlédnutí 3,9KPřed 3 lety
Simple solution to keep your Safariland® holster from rattling around. This is high quality foam with adhesive backing. I tested with solvents (gun cleaning type), cold, heat (yes that is a MAPP gas torch in the video), and water submersion to ensure that it is stable across any environment you may find yourself in. Available in 1 or 5 packs. Foam is .625" in height, so measure the gap in your ...
Stippling - The Easy Way
zhlédnutí 72KPřed 3 lety
Using the OT Defense 'Thorns Tip', I will show how to stipple a Glock 44, simply. Stippling is not rocket science. It's kind of like shooting, you only hear about the guys who have mad skills, or the guys who shoot themselves in the leg.... there are far more of us in the middle making good shots and doing it safely. Be smart. Practice. Act like a grown up, if you have questions, ask! You'll se...
Flag Stippling over Wagon Wheel Stipple Job
zhlédnutí 5KPřed 5 lety
Flag Stippling over Wagon Wheel Stipple Job
Safariland 7TS 1911 Nub Mod Installation
zhlédnutí 9KPřed 5 lety
Safariland 7TS 1911 Nub Mod Installation
Moving plastic rather then sanding - another stippling technique
zhlédnutí 16KPřed 7 lety
Moving plastic rather then sanding - another stippling technique
Waffle tip stippling- getting straight lines and NO circles.
zhlédnutí 78KPřed 7 lety
Waffle tip stippling- getting straight lines and NO circles.
Can you run this holster without a plug? I just got a compensator for my g17, making it a g34 length. I have the same RDS holster.
you can, just don't sit down in the mud and pack your barrel- lose a bit of rigidity but not a ton
Ideas on XDM.
similar material as Glock
Awesome work a little scary diy . Also sick thumb bro
Great video esp the examples at the end on diff frames. Thanks!
What’s the spartan tip
one of our specialty tips that looks like a spartan helmet
Man I just realized this will remove the ability to use a magwell since the grip shape is changing. Love magwells but hate the grip angle, I am gonna give it a shot on at least one of mine this weekend
I've not done it, but I've had a half dozen customers epoxy a plastic magwell on afterwards (requires some modification to magwell piece itself)
good, thats the way I did, some people grind and sand first but think about it, those original design are just plastic so it doesn't matter, anyway we want it rough not smooth. done well good brain.
Awesome product, but what if I have a g19 with tlr7 but want to be able to use a TLR1HL in the future as well, which model do I get or do you have a product for that as well
For 7ts model
These are based off muzzle so G19 with either light works-
Very nuce work will you lose the ability to add a a flared magwell?
You would need to modify a plastic magwell and/or get creative with epoxy to place it.
Will this make the up and down play go away with the 6354rds m&p 4”?
Our plugs are a little tighter but you need some play to account for temperature changes etc... you need our anti-rattle foam to eliminate the slop
@@OTDefense thanks!!
I just carefully measured and cut the extended plastic, and the old Nub Mod works perfectly.
I've had quite a few folks do this- only seen one holster from a customer where the Kydex body was cut lower from the factory and cutting it any shorter would have allowed the lever (even with a Nub Mod) to bump into the holster's inside.
What about the KelTec frames? They look like a different type of plastic? Easy or hard ? What types of tips you would recommend for the P17 ?
Honestly been a few years since I've touched one.. Thinking more of a higher glass fill. Generally if you practice on wide area of materials, you'll start to recognize high vs low glass in a press or two and know how they react.
💯
Great advise here, I got my first stipple tip from your company today and this video makes me want more of them. This is a good skill to learn.
I just ordered the z tip off of your website not really wanting to sand down my 19x frame, would I be ok stippling without sanding anything with that Tip?
It will be fine as it is a 'bulkier' tip. Gen 3 I still would with that tip though
Has anyone re-shaped their cutout to fit? I have an OD frame and would like to keep the original Glock OD. Just don't have a good idea on how to proceed. Any ideas would be great.
Lots of folks do that, have to heat up the cut off part, shape it and let it cool. Maybe repeat if needed, then epoxy it into place, by filling the entire hole. Don't let any get up into the trigger housing area-
Has anyone done this and was able to modify a magwell to fit? Magpul or Agency Arms for example.
We've had quite a few folks mod a magpul to fit, with with a permanent epoxy to fit it in place.
I spoke with you in January regarding the longer length leveler 0:24. I’m glad that you made this video. Hopefully you are able to come out with parts to fit it. This video gives me hope for it to come out.
Working on it. Trying to make one that fits both old and new but may just end up with a old and new lever Nub Mod option...
@@OTDefense ah okay! I will keep checking to see when you have the new option. Thanks for everything.
💯
Hey Let me bug you for a minute I have Questions: if I wanted to flat backstrap my G19 gen4 Do I order the "Gen 4-5 full size and compact frame" one ? (because it don't say G19 on the options) Do I just order the "Jig Only" that comes with everything I am gonna need? Do I have to stipple it for a better bond or can I get away with the glue and Talon grip it? I have a G42 & G26 gen5 I want to do to but i'll just start with one then work my way through to the others.
Order the jig and the backstrap you named and you'll be good to go. Talon tape will need trimming but be fine
@@OTDefense I probably already know the ansewer to this but Would you stipple it? (humor me) I was thinking of stippling the back and front and talon tape the sides. And the only reason I would stipple the back is because you said in one of your videos that glue and stippling creates a better bond overall. I have felt talon tape on a friends gun and it felt nice, I just never felt what stippling feels like grip wise. I wouldn't think it would be a better grip than the tape. (though i could be wrong)
What is a rough estimate of temperature on tip?
900F
@@OTDefense thank you ordered arrowhead, basket weave and straight tip from you gonna be stippling all my firearms
If you’re stippling your gun to customize it that’s ok , but if you’re stippling to get a better grip on it, you don’t need to be shooting a gun period.
Like driving a car on ice with studs vs without? Traction helps. Hence the reason all gun makers put some form of texture on. Some more aggressive then others.
What a stupid comment lol
With this work with a Glock 19 threaded barrel with sure fire x300 safariland holster 6354
As long as the round light plug is still in place, yes. You may have to trim the foam depending on your rig
You don’t sand?
Not needed with tips like this, especially on a Gen 4. Gen 3 you can just melt the big texture in, or sand if you want. I prefer to leave as much factory material on the frame as I can.
@@OTDefensewhat tip is this and do you recommend stippling the entire outline first?
@@settleschris1965 6min mark forward for about 30 seconds answers both questions:) Outlining first with random tips way easier
@@OTDefense thanks for all your videos! Started practicing with mine today and ordered tips from OT!!
I like the ham from wilder on there
Thank you for showing how to get the holster apart at 7:00
sir i just wanna say thank you for making this video i purchased a Safariland 7360 thinking that it was gonna fit my Glock17 G5 and my first thought was someone added a plug to just fit glock 19 i dint know that the barrel plug was not removeable just wanted to say thank you again for making this video keep up the good work
You are welcome! Plugs are mostly removable just kind of a pain:)
Awesome stuff. Just wanted to express my thanks for all you've come up with. Your accessories and contraptions really put refinement into some of handgun ownership's kinks.
Thanks!
Wow so glad I found this video
Oh man put the thumb away !!
I removed that SLS and hood on my ALS holster, but once I took the screws out, there’s still an exterior collar, that retains the screw in the holster that stick out about a quarter of an inch exposed on the outside of the holster, do you know how to remove those? I apologize for not knowing the correct terminology. Thanks.
email some pics- info@otdefense.com
Should stippling be done before the backstrap is removed? Or is after ok? Thanks
Can be done either way, but if it's a new gun I'd reduce first and stipple after.
Can this do all glock pistols or only certain ones?
all Glocks, but the G36 at this point
Are you reattaching the cut off piece? or is this another backstrap
Pause at the 20 second mark and you'll see our 'Flat Backstrap'. You can head up and reshape the cut off piece, but I'd recommend you fill the void with a 2 part epoxy since it doesn't have the middle support like our backstrap does.
@@OTDefense Thank you. Yea im trying to figure out how much reshaping of the cut off piece I can get away with, without it looking janky. I think If I do try to, Im drilling a couple holes for pins and epoxying.
Nice ShadowMan. 8541SS
First guy to notice that...Semper Fi!
Man that wood burner got that thumb pretty good 👍
ha, yeah it was an Russian 7.62 burner:)
@@OTDefense 🤣
0:09
Thanks for the video. I liked it for later! I also didn't even notice your thumb til I watched it a 2nd time, was so focused on the patterns!
Do you have to have a light on your pistol for this to work?
Yes
Bravo！
Smoke detector+battery= happy viewer
I need to stipple slanted front cocking serrations on an FN 57 pistol slide cover. Which tip would be most appropriate for this?
Looks great, bet it’s well grippy.
Does this product help with the issue left handed shooters have with ejected brass pelting their arm?
It could as it deflects the brass forward, but it's still throwing it on the 'wrong side' for a lefty.
@@OTDefense Much appreciated. If what Reddit says is true about there being a Gen 3 coming out soon, hopefully the new generation addresses this issue. I'll still get this charging handle nub for comfort though - that goose neck charging handle looks like it'd be rough to manipulate raw. Anyways, thanks again!
I have a 6365RDS ALS/SLS. Which mod do I get?
SLS nub mod
I took my AR180s to the range last week, ran it with a suppressor, obviously in suppressor mode. No issues whatsoever, in fact after I was done I remembered I had it on there, and no pain no tearing up my knuckles nothing. The only thing I wish existed is color. But that's Gucci stuff to worry about. Guess that's why they make spray paint.
I filled mine in with epoxy, cut it down with a Dremel, and stippled it with a wood burner. Came out great and was very easy.
That's one way to do it. Used to do mine that way until I came up with this jig. Our jig and backstraps allows for a greater reduction beyond the point of dremeling down just shy of the epoxy (to leave factory material to stipple).
Thanks brother for giving out this knowledge. Just bought your kit and going to practice on my box and extra back straps before I dive in. Going waffle tip because I’m a noobie and I want aggro-grip because my hands are straight leather lol greatly appreciated!!! 😎🇺🇸
Do the Jigs ever go on sale? I'm not a gunsmith so it's hard to justify $100 plus parts to fix a $50 PSA dagger frame
Generally not. Honestly if you've only got a single frame reduce it may be better for you money-wise to do an epoxy style reduction.
Hello, can we ship to China?
We do not.