Video

Obviously, this video footage was captured sometime around Christmas. 😊 _Thanks for the detailed instructions! Your video absolutely saved me LOTS of time. It was easy & it seems to work just fine._ _I just wonder how long it will last? I bet it fails after a couple of years... but hopefully we'll be luckier than that._ 😮 BTW, I bought the same exact booster (same model #: ANT-208) from TEMU. It was about (U.S.) $7. The instructions were 'OK'... but your video filled in the gaps. 👍🏼 *THANKS AGAIN, SIR... from Georgia, USA.* 👍🏼🇺🇲

Is it still the same you can turn up idle on throttle with the cheapest autel diagnostic tool ,£50

Did you remove it from the airbox before cleaning? Thanks

I have the exact same issue and have had it for 2 years. At first it worried me but now i just accept it as a part of life. Weirdly its very inconsistent, sometimes it barely hunts at all, just shakes more than it should, other times ive had it dip so low into the revs i worried it would stall. Mostly the former thankfully. Ive no idea whats causing it, ive never had an error code or light which leads me to believe its a sensor issue rather than a mechanical one. If i drive the car even for a couple minutes down the road, turn it off and on, the problem is gone and it idles perfectly smoothly.

where ios the water pump on that engine? i have looked at loads of videos as my water pump is leaking....not one person points it outside.....doing it from upside down with a shaky phone does not help anybody........every mini mechanic goes to the rear of the engine.....my leak is pissing out from the front buy the pulleys??

Naughty boy farted @5.46 😂

Gareth Southgate

5:45 what the hell was that?!!

This only works for FM and will block all AM channels so its no good if u want AM channels. The guys on ebay I bought it from lied to me about this..

BIG THANK YOU from germany. Just got my car fixed.for 0 Euro. I cleaned it and its working now

Hallo my friend I have same german plastic bmw and same problem lazy idle etc. well 1- clean maf sensor whith only "maf sensor cleaner" 2 times 2 -change all 4 ignition coils and lgnition plugs at time sure be same all 4 3-change air filter 4- after 2-3 days clean maf sensor again This is solve my lazy idle problem whith minimum costs, whish you luck 🎉

Hi iv got one of those head unit but when I connect up to Dacia duster I have no sound from Head unit

Thank you verymuch amigo 🙂

Don’t think I can use this on the coolant reservoir overflow tank instead of the radiator?

Gracias, muy buen video, me ha servido de ayuda. Efectivamente a mi tambien me ha mejorado muchisimo la recepcion de emisoras en mi Autoradio. Muy barato y de calidad. Espero que me dure mucho tiempo.

there are 3 bleed screws

Hi, Is it possible to reach it from the bottom of the car ?

I have a BMW X1 2012 and I can't find the aerial connection socket behind the BMW professional head unit. Is there another way of attaching the aerial by hard wiring in.

2:25 On that particular supplied harness there is a wire labelled 'Auto Ant' and/or 'Amp' on the harness ...I believe that'll give you your switched live as well...nice upload tho

Thank you very much, Giving me the information what I searched for long time, jah bless

A very helpful video. Many thanks.

Thank you very much

Whats the white cable that sits near the hose connector and the exhaust. Think mine needs replacing someone let the plastic get melted.

Hello good sir. did you ever get to the bottom of the problem, now it is a year later?

Followed your video for my fiat scudo van. Eml light now gone. Many thanks

Hi pal thanks for the video, do you have a link for the sensor? Im just scared of getting the wrong one

I tried it for AM radio not ok

Looking like you have a active antenna, the tube looking thing on your antenna cable is a bias tee, used to feed 12 Volt to your antenna, important that the cable on that thing is connected to 12 volt

hello, i've done a fuel pressure sensor replacement exactly like in this video. now my car won't start. i disassembled and reassembled the EGR and pressure sensor with care and i think they are correctly back in place. i noticed the old sensor has a washer at the far end but the new one i replaced it with doesn't. this new sensor seems to be the same as the one you bought in the video. any idea why?

great camera work, can someone please help me, my friend has a mini one 2003 (not cooper) and he wants to replace the hose coming of the coolant chamber, can anyone give me a link to a tutorial or whatever you can to help me, thanks

Can two of these boosters be connected to the same radio for even better signal strength?

I have the same issue. I've been living with it for 2 years now. Still no codes

Thanks for doing this video and most importantly for explaining what the symptoms was. It's exactly what's happening with my mini...Thanking from Australia

If you only need to change the Pressure sensor on a C3, remove the battery and battery tray, then just use a 27mm deep socket to change sensor. Saves a lot of work.

I have P0087 after changing fuel filter. When going over 2500 rpm i get the foult and limp mode, after restarting code is gone until i rev up again. Can the new filter be defective???

thank you

Thank for video

Did you get to the cause of the rough idle? I have similar and suspect the breather valve which is part of the rocker cover, so may need to replace it.

😎👍 Thank You

hello did this stop your car from priming the fuel. thanks

Hi mate, I've got a 2009 ford focus 1.6 tdci exact same engine etc. I replaced the sensor too, does the sensor have to be flush? Does it have to screw all the way In?

So ok i have just had this code p1351 come up with the dashboard looking like disco light flashing on & off with lost mileage ect ect ect, it turned out the be the wiring loom on the ABS pump but also could be the ECU loom as well because both looms are connected, i have not look to find what's causing the issue as yet, but if i keep the loom up in the air it stops the fault so just zip tied the loom up for now,,,cleared all codes an everything fine now!!!! Hope this may help some folk out there!

These aren't a hot bleed system.

La calefacción funcionaba?? Ami no me calienta la calefacción

Hi , i have a peugeot partner with same engine with this car . Sometimes it doesnt idle well , it waves and if u listen carefully engine gives a bit more gas to keep it idle . And it acts like if its stall but it doesnt . It not always happen but does it sometimes . And there isnt any code except egr fault , i dont think that thats the problem if it was it would always . this is the normal czcams.com/users/shortsc-pCEi3spT0 this is the what i mention czcams.com/users/shorts7dn8x_Ado74

Brilliant video best seen ! I got a code p0087.. peugeot hdi 1.6 estate 2005....says low pressure fuel think it could be fuel pump ?

i can’t lift it up is there anything to do it with ?

Great video. Thanks. Think it will help me sort my bad FM at last. 👍

Sounds like egr valve could be choked up ,remove and clean with oven foam works a treat 👍

HAU KEN BAY THIS AMPFAER ADRES OR TELEFON