Video

I have a shutoff valve inside.

The rear speakers connect audio to the soundbar wireless. No need to run speaker wires. You still have to plug in the rear speakers to an electric outlet. The speakers need electric to power the built in amps.

@@rossishima thank you 😊

Private owner. Going through dealer will erase the extended warranty.

Yes, per Firman there is a relay built in so should the engine shut down the relay closes flow. Same holds true for the propane. Its a safety thing. I kind of suspected it would be a vaccum diaphram type so when the engine shuts off, no more vaccum and the valve would close. So I contacted Firman, in short, there is a safety relay built in.

No problems, made tons of ice cream.

@@rossishima Thank you

Yes in hindsight, but at the time I did not want to risk crushing anything.

A qualified local plumber will do it. When you buy the hose kit, it comes with the fittings. The fitting to the ng source is the quick disconnect--that is the one where you pull the collar back to attach.

@@rossishimawhat size diameter hose is recommended?

@@aarongarza6733 1/2 inch inner diameter hose. Make sure you get 1/2 inch male flare to 3/8 inch female flare adapter

@@rossishima thanks

Looks like a short throw projector so you can use the hdmi cable or optical. As a last resort you can use bluetooth if your projector supports it, but you may experience audio delays. Looks like the projector does not have eArc hdmi so hdmi for atmos (need eArc for lossless atmos in bluray). Optical connector does not support atmos, but the soundbar will synthesize atmos effect pretty well.

@@rossishima Thank you for the quick response. Yes, Aurzen Boom3 Projector doesn't have eARC HDMI, but can we try some eARC connector/adaptor to connect Soundbar to Projector? Can you suggest which Projector supports eARC HDMI connectivity with Samsung HW q990c soundbar?

@@devramesh9454 Regular hdmi would be fine with the q990c only caveat maybe audio delay to visual. The soundbar does not care about what is equipment is sourcing the audio so any projector output would work.

Maybe the positioning of the temp probe is not in the right place or the temp probe maybe out of calibation? I have done this many times. The smallest chicken was 3 1/2 lbs but I try to stick with birds over 5 lbs as I like leftovers. I would test out the probe in boiling water to see if it is defective. This method always gave a juicy chicken, never had a dry one. Also, 3.5lb took 45 minutes and a 6lb around 1hr. If your cooks are over an hour, something is wrong.

I would not worry about it unless your house is an outlier. You have a natural gas regulator/meter outside the house. That meter steps down the high CF gas flow from the street to a CF that homes would use--typically 200-275cf. The Firman Tri Fuel uses around 100 CF at full load. As long as the outside gas meter allows more than 100CF, you are fine. Too low of CF to the generator means you have a faulty meter or your appliances are gobbling up all the avai CF from the meter; which will cut down on the generator total output. Anyhow, the normal residential gas psi delivered to house is 7'water column or .25psi.

@@rossishima Thanks for that info. I really appreciate it!

PS72 with case at Bluetti off of Walmart for 217 is a steal. Only issue is cannot dual charge.

@@rossishima that’s still amazing! Although I am still confused to this day, is the eb70 and its other variants a 1000 or 700 w inverter? I keep seeing conflicting information and it seems like some of the eb70 models actually had a 1000w inverter not just one that surged/power lifted. My whole thing with the eb55/ps54 is that dual charge, specifically being dc, it makes me consider it over the river 2 pro despite the lack of app and smaller inverter…

@@SolarPunk80 EB70 was originally listed at 800w but in reality turned out to be slightly lower. The 1000w applies to countries that have 220-240v. US is 100-120v.

@@rossishima awesome! Even though It’s still confusing 😂😂 But I have moved to Italy and the fact that there actually was a difference in the marketing that reflected an actual difference makes a bit more sense, thanks Ross! I hope you score that deal and that it works out! I’m assuming that even though these PS versions aren’t refurbished that Bluetti doesn’t offer their 5 year warranty for them, but if I found out they did I would be very tempted to pull the trigger on the ps54, I love the idea of being able to use power banks with adapters in situations when solar would be inconvenient or impossible that’s why I was so bummed to see that the Ac50b ditched that possibility 😅

You still get full warranty. It is sold by bluetti as a link on the Walmart site.

Per Apple support: On your Apple TV 4K, go to Settings > Video and Audio and select Audio Format. Under Immersive Audio, check that Dolby Atmos is on. How about using Apple Tv through the TV built in Apple app? I know my TV Apple app does output Atmos.

@@rossishima it's on, I've been on it actively for the last many many hours. I just figured it out, turns out, even if it says 5.1 it still outputs Atmos, I put my ears to the speakers and there's some upward firing sound. It shows Atmos momentarily then goes back to 5.1 after some time 🤦🏾‍♂️🤦🏾‍♂️ ridiculous

@@rockerkunal Double check to see if you have adaptive sound on. If it is on, adapative sound would create quasi-atmos surround sound so the atmos speakers will be on. Switch surround mode to standard to get true atmos. Also make sure the content is recorded in Atmos. It would say so in the audio description.

Cliff my brother from another mother. I just bought this soundbar in Friday 🐻⬇️🐾

@Scottishbear582 I think you will like it. I used the USB plug to update the firmware. Sound was even better after the firmware update

​@cliffvictoria3863 Cheers, Cliff, what's the latest firmware & how do you know what version i have. With me just buying it. I thought i might have the latest firmware bro unsure Cliff 👍

@@Scottishbear582 look in your settings for updates. I forget where they are.

Cheers cliff bro 👍 🐻⬇️

Have you tried to sync it manually? Also move speaker closer to soundbar to sync, may have interference someplace.

Basically the same unit, just different case. Same electronics and battery. Go with the best price though the PS54 is a newer version so may have fresher batteries.

@@rossishima muchas gracias amigo por su respuesta 👍 a sido de gran ayuda, casi no hay videos de esta batería en Internet y poca i formación! Tiene un nuevo seguidor, muchas gracias

@@rossishima perdona que le haga otra pregunta, esta batería es de 700w según indicacion pero eb3a 600w / pico 1200w Eb55 700w / pico 1400w, ps54 700w / pico 1400w ? es correcto ? Muchas gracias

they give you cable.

For more critical music listening with no special effects added, the avr route is the way to go; mainly because you can set the front speakers apart at 6 ft vs 4 ft for wider soundstage. Though you will be spending more because of the speaker costs. The Samsung soundbar has the option of moving the rear speakers to the front to widen the soundstage. Naturally when using adaptive surround mode, the side speakers of the soundbar will engage to fill out the soundstage and the simulate atmos or atmos will kick in. For casual listening or background music, the soundbar has decent soundstage, clear, neutral, and accurate; way above it pay grade.

Great price compared to the new model. Basically same if you do not need the couple addl featutures. For under 1k nothing comes close

Yes, we use it daily. With stood the test of time, still available yet.

@@rossishima two of ours, died. one in the house & other in guess

For those that do not have the room to store or have the budget for individual appliances, the Foodi can produce the same results with only one unit. The Ninja is convenient, quick, and easy to clean. It is not a gimmick. My family uses the Ninja several times a day. Though I have all of the specialty appliances, I purchased the Ninja for the temperature probe (perfect steaks, chops, fish) and the steam/crisp/bake function; then found out how easy to make Yogurt:)

@@rossishima Thank you for your responde. Great to hear the temperature probe appeal to you, in so many videos the people complain about how inaccurate it is. In your honest opinion is the ninja better for the bake and crisp function than an regular oven?

@@panna_nikt I find the temp probe to be very accurate in accordance to the food doneness setting selected. Unless your oven has a water insert, the steam bake and steam crisp is a game changer. Professional bakery use steam ovens. I can steam/crisp a 6lb chicken is about 1 hour using the temp probe and it comes out juicy and crisp. No more dried out Salmon either. Since the Nija internal volume is smaller than a regular oven, it gets up to temp a whole lot quicker which saves time and energy.

Good thing about purchasing from Costco is the return process. You might have gotten a dud, as for me, the scanning and printing are non-issues.

Check the TV settings to see if the digital audio out is set up correct. Uncheck DD+ if your tv does not support as this may distort audio. Remove and reinstall TV apps. Possible the ps4 has or is in a better location for wifi. I take it sound is ok when using the tv audio. Also, check the menu on the soundbar to see what signal you are getting when using the tv app--click the info button on the remote.

@@rossishima Thanks, i check aps and i also will reset tv to factory setting. Funny because tv is conectet by Ethernet and ps4 wi fi. Thank you.

@@rossishima I you hadn't mentioned Wi Fi I wouldn't have thought it was the internet cable that might be the problem. I changed to high speed and everything works. Tkank you for help.

@@foofighter7933 Agree, it does not make sense. If you were to unplug the ps4 does that change anything. If so, you mayhave to plug the ps4 into the soundbar direct. I have bluray player apps, streaming sticks all plugged into my TV and all of the apps work fine.

24ft

The tape is not necessary for a tapered gas fitting, but it is provided more or less to make it easier to tighten and remove the fitting than to prevent leaks.

Yes, it is a regular ng gas line; not a specialty line. As long as it is a standard grill it should work, if not, you will need adapter fitting.

@@rossishima yes i have a standard Sams Club grill currently on propane, but i would like to do the added gas line to use a generator on natural gas in case of emergency and when not; use it for grilling! thanks

@@moctezumacuauhtemoc8470 Ok. You have to convert your propane gas grill to ng. They have kits for this. mainly swapping out the fuel jets.

Have not have to yet. If it gets cruddy will do, but pain to r&i it. On my lid, the seal is very tight, nothing under it yet.

If you say the first time we use it I remove it and it was a bit dirty

What inputs do you use to connect to your PC to the soundbar?

The soundbar does not care what your TV is, as long as it has ARC or eARC connection. Make sure your TV audio/digital out is set up correctly for the soundbar.

@rossishima After 1004 update, the HDMI is finally working!! Quick question: Does Dolby Digital Plus enable Atmos? Thank you.

@@navjotsingh3888 Just make sure that eARC is turned on in the tv settings and that the hdmi pass thru is on in the tv settings. DD+ should be on as its the codec used for atmos.

@@rossishima Thank you, it helped a lot!!

7 years into it. barely any body impressions. No issues and still sleeping like a rock. No need to switch out the underlying foam yet.