Video

I think you'll like the Da Vinci Colineo line in 1, 2 and 4. Love them! I like them better than the Monument Hobbies Pro Synthetics.

time to time i want to relax from painting miniatures and order a bunch of chinese bootleg gunplas for like 5 to 10 euros each they are amazing for the price and specifically on those older kits like rx-78, zaku variants, GM they are pretty close to the official product highly recomend if u want to paint something way bigger than the average wargaming miniature

I own about 500€ worth of knockoff lego and If it was authentic lego the price would be something up to 3500€

I'll stick with my 3 M5s printers putting out 3x's the production

Be very careful with your purchase. Elegoo may sell replacement parts for the Mars 5 Ultra. They do not sell replacement parts for the Mars 5. One resin leak and you are buying a new printer. There are no replacement LCDs for the Mars 5.

Do you have a video (or can you refer me to one) that takes a 3D resin print with the Mars 5 Ultra (or something similar) from the beginning (STL file, adding a base) to the end (UV, IPA washing, etc.)? Good video, btw! I have everything I need but don't want to begin without some knowledge/confidence on how to complete all the steps. Thx!

As long as the print lines are still visible, the search still goes on

Sorry I'm in a loud place but do these glow under a black light once shinned on and not after the light is of it, mainly if the white one does.

I tried your code but didn't do anything

James, if you'd ever like to organise something similar, we'd be so happy to sponsor you again 😄 We love how much creativity it brought out of all the participants, and how unique each owl turned out, despite coming from the same model. And thank you so much for all the kind words about Wargamer. It is not THE perfect resin, but for tabletop minis, it is pretty dang good 👍

❤️🤘🔥

This was so kuch fun! Thank you James! And the sponsor.

clickbait

Whooo, I did manage to sneak in as a text cameo with the mention of Project Owl, woooohooooo!! I'm hoping to be part of the next challenge, as it looked like it was a good bit of fun. I'm also super curious about the resin - hopefully the Canadian distributor will be able to have better pricing, especially for shipping in the near future ^_^

What an absolute blast, and a cracking gallery of pieces!

Arrrghhh, my voice! This was such a great challenge. Fantastic stories and models from everyone who participated. Looking forward to more challenges in the future! 😊

I love the confusion and arguments around buying non Lego sets. Forget about “Fake” or “Rip-Off’ or “Knock-off” arguments. In fact lets for arguments sake say you don’t want Lego at all but instead you want a nice Rolex watch but don’t want to splurge 10K+ on one. So you go on holiday and buy a knock-off for £100ish. You haven’t saved nearly 10K on a Rolex because you haven’t purchased a Rolex. You have purchased a £10 junk watch for £100. Everyone that sees it knows its junk and when you get bored with it and take it to your local Rolex dealer and try to cash in on your bargain you will be laughed at. The same thing is true with Lego. Only Lego is Lego, Only Lego retains its value in the second hand market. So if you can’t or won’t pay Lego prices you will get cheap plastic building bricks, Thats all, You haven’t saved a load of Money on Lego because you don’t have Lego.

the title just pisses me off "i built the biggest warhammer LEGO on the internet" the biggest lego what? biggest warhammer lego *built* biggest warhammer lego *model* biggest warhammer lego *design* biggest warhammer lego *creation* all of these would be fine and acceptable but just calling it "a lego" pisses me off to no end, i know i know im making a way bigger deal out of it than it has to be ... i know that its still horrible its like calling a brick wall "a brick" or calling a piece of origami/paper airplane "a paper"

Here's something that will change resin printing - not needing a lab and a hazmat suit to use one.

Noice beaky krooza!👍

Try buying dice i bought some for Dungeons and Dragons but I wonder how warhammer dice would be

For someone who likes to repeat the virtues of being a "grown up" I've never heard so much whinging and moaning about having to build a 700 dollar lego he got for 200 bucks.

Having watched Ross sing the praises of this printer, and now you, there's no doubting it's a wonderful thing but unfortunately it's also prohibitively expensive, as is their resin. Also, being locked into the HeyGears resin chain. For me, it's another, "If ever I win the lottery" item. A hard thing to do as I don't play the lottery 😂 Great video nonetheless, thank you )O(

Thank you for the video (and time/effort that takes). Lots of great information, I forgot Golden was employee owned. No wonder they are so awesome when you contact them. I LOVE Golden!

Great model…just wondering when GW will try to take this one to court. 🤔

can you please tell me what kind of files the slicer converts the finished supported files into? like what kind of files are these? is it possible to open the finished auto supported files with lychee and chitubox? i would like to use the program to auto support my sculpts. that would save me alot of time...

i live in southern Florida so everyone complaining about a heater is a moot point for me.

why did fauxhammer do a very similar video at the same time?🤷🏻‍♂️

Fauxhammer? I stopped watching Fauxhammer after he admitted he was putting misleading scenes in his videos as a "joke" and then claimed I was at fault for taking his videos seriously. We look to leading reviewers for best practices, but it turns out he's not really good for that.

This isn't, and cannot be, "the end of 3d printing as we know it". That's like saying cars coming from the factory with track tires already installed is going to be the end of aftermarket tires. 3d printing is by definition a hacker creation. And I use the term "hacker" in its original and true context, not in the current "breaking into computer systems (cracker) meaning. There will always be a market for 3d printer systems that are print medium brand agnostic. The PC was never the death of the Apple or Mac. The gaming console was supposed to kill off PC gaming 20 years ago. Until a core technology goes away, there is always a market for non proprietary components and ecosystems.

I got an original mars many moons ago and it still works fine. Don't care for the new build plate for the same reasons you and others stated. I'll be buying one I'm sure but it'll be at least a year form now to see how reliable the tilt mechanism is.

Working on an ork stomppa rn should I use plastic cement or just super glue due to its size?

I have no doubt in my mind that this is one of the best printers on the market right now if not the best. But $1500 plus $50-$80 per bottle of resin is just prohibitively expensive. Again, I’m sure it’s fantastic. I just cannot be even close to affording that right now, not to mention it’s not even a 10 inch build plate. It’s closer to the size of a Mars.

Is it useful to apply the tamiya decals with tamiya cement?

How does pap10 and parp10 compare to phrozen 8k resin in terms of detail and quality? Using phrozen on a GK2

👍👍👍

blow it up.

Reads thumbnail... Agreed.

I’m a fellow HG Reflex lover and have about six months under my belt with it for engineering applications including casting metals with the PAC10 resin. Just quick note: from my research the Form4 uses a system that sounds identical to the PRM unit of the HG’s. It’s just built into their printer. Also, the PAH10 resin is the strongest resin they make by a long shot. Use it where strength is critical. Lastly, I regularly use third party resins in my HG’s printer. It works wonderfully doing so.

Lego is better then gw

I painted my first mini (3D printed by a friend) with a 4€ 12 set of 14ml acrylics with included brushes (usable) and palette (useless plastic waste, made a wet palette out of a plastic lid and some kitchen roll). It turned out fine, if a bit glossy.

Hey mate! Love your videos, love from Australia here mate! I’m a brand newby getting a resin printer soon and I’ve managed to snag a pre order for the gk3 ultra at 999 usd, but I’m still torn between it and the hey gears, both are amazing and I’m a bit deterred though by the price of resin for the HG hey gears, and that I can’t change any of the settings if needed. I know it’s perfect out of the box but in future it’ll change and we will still be stuck with that software, settings and resin. I will mostly print miniatures, busts, models and such so I’m happy for your thoughts and input if you’d kindly, I’m just torn between the two 🙂 Love your content mate you are an absolute legend

Amazing, high-end, consumer piece of kit. Thank you for introducing Hey Gears, Reflex as quite possibly the BEST 3D Resin based Printer. I'm a novice , just getting started into 3D filament printing. However, as a retired sheet fed operator, of typically four, five, & six unit offset, full size (40 inch), ink to paper, printing presses. Industry leaders such as, Mitsubishi & Heidelberg (Speedmaster). I've been through many stages of printing & seen it evolve over the years. Early on when I began the trade of printing on paper, it was working in the format known as led type set. These were most often single unit (1 colour, more often black), however, one German Heidelberg printing press stands out the most, from my many, learning experiences on it. That was like the ultimate, revolutionary machine of its time. A strong & heavy press (for those days). The German ink printing machine, called the Heidelberg, Kord. Just google it. That press helped evolve the industry. What I mean by that is, after laying out small, individual pieces of led type, setting it all, individually into a wooden, flat, holder, called a chase. Well this was quite laborious, clever, unique, stylish & all, but once I disassembled this press somewhat. Cleaned the press, and made it ready by installing 16, or more cylinders and rollers, this meticulous, but slow press was transformed into a speed demon. One of the worlds first truly fast, ink printing, off-set style presses. Capable of handling both, type-set, & off-set printing. Now we no longer had to work with individual type pieces of led. Because now we can assemble much more content. Rich, flowing images, and text developed by camera onto plate. Years later in my career, I watched the disposal of a lot of skilled pre-press workers.You see with the ever more increasing use of more advancements in electronics, the technology forced many skilled workers in camera & plate development out of jobs. Take for instance the final versions of multiple unit presses, made by Heidelberg. Just as we rolled into the new millennium, Y2K came about, so did the elite of the Heidelberg, Speedmaster's, off-set printing presses. There was no more hanging the plates to impression cylinders. Instead, every time new plates were required on units, laser diodes went into operation & burnt a new plate. The plates' image came from a RIP on someone's computer, somewhere, after being proofed & signed off by a graphic artist, as well as the client. Next a spool fed roll of mylar with another substance layered on the top, gets rolled into action with the laser diodes burning & etching out the finished work onto the plate cylinder, holding precise register (perfect position in relation with all other plates on the press). Any how, when I look back upon those changes, the printing plant became an ever more increasing lonely place to work. I would catch myself talking more & more with machines. Don't get me talking about C.Y.M.K. (Siam magenta yellow and black), with these four process inks, one found themselves some days not having to develop our ink colours nearly as often. Those four process inks could do pretty well any shade of a rainbow. I'm still just getting into this new game (for me that is), with my first 3D filament fed, roll of substrates, gleefully watching these Creality creations grow. All the while try'n to keep an attentive eye on my creations. Would love to know if I can program my Raspberry Pi 4B, to watch over & make remote changes, on the fly, working on this Hey Gears Reflex possibly using some sort of software on my Raspberry Pi, like OctoPrint.org has created that functions well when pairing something as my Creality, Ender 3 S1 Pro, & Octo Pi? Thanks for your very informative, quality video cast. Hopefully many more to come.

Amazing, high-end, consumer piece of kit. Thank you for introducing Hey Gears, Reflex as quite possibly the BEST 3D Resin based Printer. I'm a novice , just getting started into 3D filament printing. However, as a retired sheet fed operator, of typically four, five, & six unit offset, full size (40 inch), ink to paper, printing presses. Industry leaders such as, Mitsubishi & Heidelberg (Speedmaster). I've been through many stages of printing & seen it evolve over the years. Early on when I began the trade of printing on paper, it was working in the format known as led type set. These were most often single unit (1 colour, more often black), however, one German Heidelberg printing press stands out the most, from my many, learning experiences on it. That was like the ultimate, revolutionary machine of its time. A strong & heavy press (for those days). The German ink printing machine, called the Heidelberg, Kord. Just google it. That press helped evolve the industry. What I mean by that is, after laying out small, individual pieces of led type, setting it all, individually into a wooden, flat, holder, called a chase. Well this was quite laborious, clever, unique, stylish & all, but once I disassembled this press somewhat. Cleaned the press, and made it ready by installing 16, or more cylinders and rollers, this meticulous, but slow press was transformed into a speed demon. One of the worlds first truly fast, ink printing, off-set style presses. Capable of handling both, type-set, & off-set printing. Now we no longer had to work with individual type pieces of led. Because now we can assemble much more content. Rich, flowing images, and text developed by camera onto plate. Years later in my career, I watched the disposal of a lot of skilled pre-press workers.You see with the ever more increasing use of more advancements in electronics, the technology forced many skilled workers in camera & plate development out of jobs. Take for instance the final versions of multiple unit presses, made by Heidelberg. Just as we rolled into the new millennium, Y2K came about, so did the elite of the Heidelberg, Speedmaster's, off-set printing presses. There was no more hanging the plates to impression cylinders. Instead, every time new plates were required on units, laser diodes went into operation & burnt a new plate. The plates' image came from a RIP on someone's computer, somewhere, after being proofed & signed off by a graphic artist, as well as the client. Next a spool fed roll of mylar with another substance layered on the top, gets rolled into action with the laser diodes burning & etching out the finished work onto the plate cylinder, holding precise register (perfect position in relation with all other plates on the press). Any how, when I look back upon those changes, the printing plant became an ever more increasing lonely place to work. I would catch myself talking more & more with machines. Don't get me talking about C.Y.M.K. (Siam magenta yellow and black), with these four process inks, one found themselves some days not having to develop our ink colours nearly as often. Those four process inks could do pretty well any shade of a rainbow. I'm still just getting into this new game (for me that is), with my first 3D filament fed, roll of substrates, gleefully watching these Creality creations grow. All the while try'n to keep an attentive eye on my creations. Would love to know if I can program my Raspberry Pi 4B, to watch over & make remote changes, on the fly, working on this Hey Gears Reflex possibly using some sort of software on my Raspberry Pi, like OctoPrint.org has created that functions well when pairing something as my Creality, Ender 3 S1 Pro, & Octo Pi? Thanks for your very informative, quality video cast. Hopefully many more to come.

Thank you so much for your videos. It was your content that helped me finally make the decision to order an UltraCraft Reflex. Also, thank you SO much for the discount code! I really enjoy your channel and look forward to your future content. Keep up the great work!

I just got a Warhammer ad by entering this video.

U realy are gona need nice display shelving for sure if u planing on keeping on whit these kind of vids and build especaly when u dont want to take them apart

Catch your own fish ❤

i got recommended this video and i gotta say, those were the greatest 10 minutes i've spent on youtube on a while, i specially love how you make sure to support the creator of the model, not everyone does that so yeah, definitely this is the kind of content i want to see during my free times

I dunno when ads ended and right clip started. In the middle I guess?