Video

My scooter starts goods, however when I try to accelerate it won’t move

That’s how I was I just learn today how to ride

Anyone have an idea? I have new carb, new coil, new cdi, new cyliner set and a new spark plug. Really strong spark comes out but the engine wont even cough. The valves are in:0.1mm ex:0.15mm.

I went with the bsr raven. 65mph on gps speedometer stock 😁 gonna drop the rear sprocket from 46 down to 42, and get some good 80/20 tires for a less buzzy ride at above 45mph. Other than that, shes a champ out of the box 💪

i got the 2023 hawk dlx EFI and got 75 mph out of it stock i weigh 180 so really impressed me and came with 17 and 45 sprockets

Looks amazing

🤙🤙

How to change the oil on a 2004 R4 vento scooter

That's a great bike. Don't forget about the doohickey unless you fixed it already.

I doubt you ever figured it out.

👍👍

I use a 110, but I'm at only 700 feet. Those speedometers are NEVER right!

I have done this on my 125 cc Not same bike but its similar .This is a good change to get a smoother revs on the road. as long as you don't go into verry steep hills with 2 persons or carrying heavy loads the bike will not run out of gears all the time :P

I'm late to this video, but before I pull out the carburetor, I want to spray some cleaner on it. It has sat for a while. I cannot figure out where to spray it. I need some more detail on where the air intake and carb part are located and perhaps what they look like. Some videos address the issue, but they don't take it to the finish line.

👍

Everyone needs a dual sport. Everyone.

Any fixes for that screeching? Sounds like it’s coming from my front wheel?

Sounds good

👍

4:39 you said unit 😊😂

My 49cc taotao won't start its getting fuel and spark, it acts like it wants to start when I spray gas in the carb but nothing. I've changed the cdi, carb, fuel filter I'm at a loss

If that is correct.. I wasn’t even born yet when this video was made…. Surely this wasn’t in 2000?

Hello sir so happy to watch this video....I am in Haïti 🇭🇹 can you help me to get a kit of line for my scooter please 🙏🏾🙏🏾🙏🏾

👍👍

Wait, you converted the throttle to a pedal type?

Where you from dude

how do i know if i did it correct

👍

Looks the same as my bike. You can fit a 19T up front if you want to grind down some sprocket cover, But considering you can still drop 10Tooth on the rear , it's better to just do 17T front and like 40 to 35T rear.

I have a 2022 znen 150CC

This is for the viewers watching the video, for all of these Chinese GY6 clone engines you do not screw the dip stick in at all to check the oil. All ya have to do is insert the dip stick to the threads and then pull it back out for the proper oil level check. Do NOT thread the dip stick back in to check the oil level!! The other recommendation would be to use a 10W30 or 10W40 motor oil if the engine has low miles on it or is still new. Do not ever use high viscosity oil, 5w50 or 10w50, on any small cc new engine even if ya live in the desert. A newer engine with tight tolerances NEEDS the lighter viscosity oil to be able to flow into the tighter tolerance bearing journals and valve guides!!😁

If You want overdrive for 5 th gear use a 39 or 40 t rear. I use a 17 - 34. First gear is like second or higher but I find it perfect for Me at 120 lbs. Street rider.

That top exhaust pipe, as im sure youve learned, is a "dummy" pipe. The exhaust from both cylinders go to the bottom pipe. Good luck! Cheers!

Heads up. The music is too loud at 6:00. We can't hear you at all.

Where at in pa I'm outside Pittsburgh like 1.5 hrs

Try 17/42 or 41 thats what I use my top speed is 80mph and up

A part 2?

Excited to follow your progress. I'm definitely going to use your project as inspiration for my current XV250 project

Where in Pennsylvania are you located I need a tune-up on my 150cc

Bigg grom clone

I used a ladder across the bike and a ratchet strap to raise the rear to install the bolt trough the shock mount. And I moved the ladder a little farther forward to raise the front to install the front fender and tire. Worked pretty well actually.

9:15 pm, thank you, your video helped me out. I can change it myself without asking to have someone change it.. 👍🏼👍🏼

i did the same thing to my hawk dlx and im not shure if i like it it has no power in the top end now or it feels that waythe engine definitely likes it i will say

Dear friend who told me the performance CDI for gy6 ac scooter that cancels the speed limiter

Btw the pops you heard were completely normal, it’s the pairs system, it pumps fresh air from the air box into the exhaust system to minimize Corbon emissions. To prevent the popping on decel look up the pairs elimination kit, should come with 3 block off plates and a plug.

What size socket??

As someone else has mentioned the filter looks like a thimble and must go inside the spring, the way it is fitted is incorrect as it is upside down and won't work properly and might restrict the oil flow to the engine, on many scooters there is an oil drain bolt on the opposite side,on my sym it is 17mm, I very rarely remove the filter and spring as it is much messier and due to the mesh size never needed cleaning in the 20,000 miles I put on the scooter. The oil I use is standard 10w40 semi synthetic car oil which I change every 1000 miles , no need for motorbike or scooter oil as the clutch is dry , car oil contains friction modifiers so must not be used in wet clutch motorcycles as it might make the clutch slip.

When did your title or bill of sales come after purchase?

I did the same kill switch 😂😂😂😂

I got a2006 150ccyhama I need some help