Video

Como faço para adquirir esse equipamento? Tenho tentado mas não consigo contato com a kubota brasil. Quem vive no campo com internet via satélite só pega whattsap.

Will the B2601 fit easily into the shipping container? I'm thinking of getting one for a cheaper shelter for it.

AKDad. I noticed that you didn't fully lower the hydrailic lever down to the #1 position when you began mowing as I see the hydraulic lever at roughly the #7 position at minute 3:09. I have the same mower and tractor and I thought to adjust the mowing height you raise the deck fully up , then use the cutting height knob (on floor between your legs) to set the cuttingheight , like 3 or 4 for example on the knob dial, then lower the deck fully (using hydraulic lever on right side)so the weight of the deck rests on the cutting height dial? The reason I ask is my deck keeps dropping while mowing slipping on the cutting height knob.

Love your channel good info in here. I have the same exact b2601 and 60 inch deck. At times my cutting height dial moves down while mowing. Dealer changed the dial cam and is better but still moves from 4 to 3.5 on occassion. Any advice? Does yours move at all.

Great video. For the 3pt snowblower and the cab, does the cab has an access window out the back in which you can manually rotate the chute or do you have to get out of the cab every time you need to rotate the chute? Thanks!

Should have put a hitch mount on the rear for towing.

Put studs on mine 5 ears later still good and use my tractor in the back 40 with no problems

I'm late to the party but want to post something from my experience with the same chains on the same tractor. To seat or loosen the pins on the 'C' clamps I used an old lawn mower blade. I would put the clamp in a position so the in was under the center hole of the blade - the crank hole. Then I could put either end of the blade over a tire lug. I could drive the pin in with just a hammer. I used a punch to drive the pin out. Worked great. Just an FYI AKGD is just great - I've used his videos to determine what equipment to buy and how to mount my chains. I 'drove' my chains over the top - found I had much less slack when the chain 'came up' on the back side. I buttoned them down and didn't have to tighten them all winter. Again, only my experience.

We miss you! Everything okay up north?!

Good morning Mike ! CZcams suggested one of your old videos from a year ago, so I went to check and see you haven't posted in 2 months ! wow.... haven't you had any new snow since November ? maybe... or you're just too busy. Many times, I just get outside and can't be bother to set up a camera. Anyway, hope all is well with you Mike !

It looks like you maybe had the edge chains 1 link too tight. One trick I learned was to drop 5-10 psi from the tires, then put air back in once you are done to tighten them up.

Sweet man!! Been watching your videos for a little while. Always enjoy em. Was wondering how you like the original tractor cab and how it’s holding up? I have an LX2610 and have been thinking about getting one. Just curious of how it’s holding up. Have a good day man. Keep the videos coming.

Installer des chaînes sur vos roue avant! Les trygg sont idéal!

Hey there new subscriber! Love all the tractor content. So , if you were to do it again would you go with the soft cab? I get covered in snow when blowing snow on the channel videos. Lol. Cheers, Mike.

I can see the rear blade is 72" but is the pusher a 60" or 72"? I have a b2301 and trying to decide between them. Leaning towards the 60". Thanks

Like your counter weight on the three point hitch. Did you make this or buy it. If you built it hope you made a video.

Snow seems to one thing you don't have a shortage of up there. Keep pushing that snow brother!

Where are you located? Seems like it snows more where you are than it doesn’t

Once again, great motivation to get moving and be prepared for our Midwest winters! I’ve run out of spots to grease at this point. Kind of anxious to get the B2601 again this winter. It’s fun and exciting to be out there freezing my butt off.

Cool video! I really enjoy the tractors and snow videos. I'm still a newbie, but I found turning my rear blade around works better for not digging up rocks/gravel.

Mikie. It is SNOWING, AGAIN you know. My across the street does that, push his snow to my yard EVERY YEAR. NOT amused. Hope YOU had fun.

Great job Mike, very enjoyable, keep up the great videos and stay safe and warm. Wishing you and your family the very best for the holidays

Did you know Landpride has a top cover for the snowpusher that lets you tilt it all the forward and use to backdrag up against house? If you call ESI, they call it the "pullback option." The snowpusher I just bought came with it already installed, but I see it's an option. Makes a big difference!

I hope that you will keep the snow up there. I know that it's time for it again.

Another good video. Mother Nature hasn't let Old Man Winter down here yet, but he's getting close. How do you find clearing snow here vs your previous property? Take care.

Good evening Mike, that's a lot of snow for November 13th. Enjoyed the video. Have a good one,Ben

I'm in the Northeast; keep all the snow up there.

Hi Rosie.

Should you not change your transmission fluid? According to the service interval that I got. Would love to just change filters👌nice video

Hey Mike. Good to see you on the live chat tonight. I hope your family is doing ok. -Ed

Glad to see you back! Although I am sorry to hear you had a troubled summer. Thanks!

I miss seeing you at Bassett, hope the new place is working out for you all. So, I made a discovery on my Land Pride rear blade...you can take off all the carrier bolts and slide the blade over to the next set of holes. Lets you get a more aggressive angle and push the snow way off to the side of the road.

Nice to see you again, and no better place than on the tractor blowing snow! Here's to a safe and happy winter season. We should be getting more snow next week. Have a good weekend

Glad to see you back. I put the doors on my original Cab and put the chains all the way around. Have that pusher in 66". First year using it. Sure is nice. Not enough snow to put our snowblowers on yet. Same as you I'm getting ready. Have a great winter from the CHSR side of town.

Good morning Mike ! Gee, I made a 2nd comment, and I see CZcams didn't post it.... I had seen your cool LED strips on your ROPS, and wondered if you had bought those on Amazon... and if you did, if you could post a link into the comments here, I would really appreciate that.... also maybe you wanna do a 5 min video just showing your wiring and how you connected it to the battery, or maybe a switch. I love those LEDs I think I want those on my BX tractor too ! Thanks Mike !

Heck yeah! You’re back!!!!! You were my motivation the other night when I put chains on my B2601! What a pain but it’ll be a champ this winter!!!

Missed you Mike, welcome back. Love that snowpusher back blade combo. Take care and stay safe.

Gotta ask I have same tractor and cab what kinda heater you running in yours? Thanks!

Good Evening Sir, 😇👍I'm so sorry that you had a not easy summer 😢😢You have made an OUTSTANDING Rear Blade and Snow pusher Video Sir 👍👍😇😇👌👌Cheers 🍻🍻

How's she goin'? Sorry to hear you had a troubled summer Mike. Hope things get squared away!! Nice to see the tractor out again though. I'll pray for you folks!!! Take care!!

Good to see you Mike! I’ve been thinking about you. We’ll keep you in our prayers. Happy winter. *Keep on tractoring!*

I'm very happy to hear from you again.

Mr. Mike: Love your videos. I have a B2601 too. I'm interested in a new snow pusher and wondering what width your SP is. The manufacturer I'm interested in makes a 5', 5.5', and 6ft units. I watch lots of snow plowing videos. But nobody ever mentions the size of their equipment. Your input would really be appreciated. Yes, I have chains for my tractor (Wish your son was here to help install them!). And I have a back blade. Thanks. Back to the video!

Welcome back. Nice to see the tractor back in operation. Today is October 31 and we are getting a dusting of snow today in West Central Wisconsin. Not enough to plow. Have a good one.

Good morning Mike, it has been a while, nice to see you back. Sorry to hear you had some difficult family stuff going on. The B2601, rear blade and the snow pusher did a fine job. Take care, Ben

Nice to see you ! Sorry to hear about what happened to you. I won't ask what happened. That's your private business. Nice to see the tractor in action. I just grabbed a new coffee and am watching now.

Hi ! Here we are Oct 30, and you still don't have snow ? you must be happy in a way not having to clear it.... I hope you'll be posting new videos of your first snow that you must clean with the Kubota !!

nice toy

OK great thanks and thanks for the video

What length draw bar did you buy?